diff -uNr tclreadline-2.1.0.orig/INSTALL tclreadline-2.1.0-1rsk/INSTALL
--- tclreadline-2.1.0.orig/INSTALL	2000-03-11 03:25:35.000000000 -0600
+++ tclreadline-2.1.0-1rsk/INSTALL	2011-07-06 10:01:49.000000000 -0500
@@ -1,38 +1,54 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -51,52 +67,55 @@
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
+  6. Often, you can also type `make uninstall' to remove the installed
+     files again.
+
 Compilers and Options
 =====================
 
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+   *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-   You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -107,7 +126,7 @@
 Optional Features
 =================
 
-   Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -122,48 +141,86 @@
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
      CPU-COMPANY-SYSTEM
 
-See the file `config.sub' for the possible values of each field.  If
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
 
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 
-Operation Controls
+Defining Variables
 ==================
 
-   `configure' recognizes the following options to control how it
-operates.
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
 
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
 
 `--help'
+`-h'
      Print a summary of the options to `configure', and exit.
 
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
 `--quiet'
 `--silent'
 `-q'
@@ -175,8 +232,6 @@
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
 
-`configure' also accepts some other, not widely useful, options.
diff -uNr tclreadline-2.1.0.orig/Makefile.in tclreadline-2.1.0-1rsk/Makefile.in
--- tclreadline-2.1.0.orig/Makefile.in	2001-01-04 14:10:30.000000000 -0600
+++ tclreadline-2.1.0-1rsk/Makefile.in	2011-07-06 10:01:49.000000000 -0500
@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,338 +12,463 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
-SHELL = @SHELL@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
 
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
 
+VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-transform = @program_transform_name@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-host_alias = @host_alias@
+build_triplet = @build@
 host_triplet = @host@
-AS = @AS@
+bin_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(srcdir)/pkgIndex.tcl.in \
+	$(srcdir)/tclreadline.h.in $(srcdir)/tclreadline.n.in \
+	$(srcdir)/tclreadlineInit.tcl.in \
+	$(srcdir)/tclreadlineSetup.tcl.in $(top_srcdir)/configure \
+	./aux/config.guess ./aux/config.sub ./aux/depcomp \
+	./aux/install-sh ./aux/ltconfig ./aux/ltmain.sh ./aux/missing \
+	./aux/mkinstalldirs AUTHORS COPYING ChangeLog INSTALL NEWS \
+	TODO
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/./aux/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = tclreadline.h tclreadlineInit.tcl \
+	tclreadlineSetup.tcl tclreadline.n pkgIndex.tcl
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(tclrldir)" "$(DESTDIR)$(manndir)" \
+	"$(DESTDIR)$(includedir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libtclreadline_la_LIBADD =
+am_libtclreadline_la_OBJECTS = tclreadline.lo
+libtclreadline_la_OBJECTS = $(am_libtclreadline_la_OBJECTS)
+libtclreadline_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libtclreadline_la_LDFLAGS) $(LDFLAGS) -o $@
+@STATIC_TCLSHRL_TRUE@am__EXEEXT_1 = tclshrl$(EXEEXT)
+@STATIC_WISHRL_TRUE@am__EXEEXT_2 = wishrl$(EXEEXT)
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_tclshrl_OBJECTS = tclshrl.$(OBJEXT)
+tclshrl_OBJECTS = $(am_tclshrl_OBJECTS)
+am__DEPENDENCIES_1 =
+@STATIC_TCLSHRL_TRUE@tclshrl_DEPENDENCIES = libtclreadline.la \
+@STATIC_TCLSHRL_TRUE@	$(am__DEPENDENCIES_1)
+tclshrl_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(tclshrl_LDFLAGS) \
+	$(LDFLAGS) -o $@
+am_wishrl_OBJECTS = wishrl.$(OBJEXT)
+wishrl_OBJECTS = $(am_wishrl_OBJECTS)
+@STATIC_WISHRL_TRUE@wishrl_DEPENDENCIES = libtclreadline.la \
+@STATIC_WISHRL_TRUE@	$(am__DEPENDENCIES_1) \
+@STATIC_WISHRL_TRUE@	$(am__DEPENDENCIES_1)
+wishrl_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(wishrl_LDFLAGS) \
+	$(LDFLAGS) -o $@
+tclrlSCRIPT_INSTALL = $(INSTALL_SCRIPT)
+SCRIPTS = $(tclrl_SCRIPTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/./aux/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libtclreadline_la_SOURCES) $(tclshrl_SOURCES) \
+	$(wishrl_SOURCES)
+DIST_SOURCES = $(libtclreadline_la_SOURCES) $(tclshrl_SOURCES) \
+	$(wishrl_SOURCES)
+manndir = $(mandir)/mann
+NROFF = nroff
+MANS = $(man_MANS)
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
 CC = @CC@
-DLLTOOL = @DLLTOOL@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = ${INSTALL_DATA}
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
 MAJOR = @MAJOR@
 MAKEINFO = @MAKEINFO@
 MINOR = @MINOR@
-OBJDUMP = @OBJDUMP@
+MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
+OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
 PATCHLEVEL = @PATCHLEVEL@
 PATCHLEVEL_STR = @PATCHLEVEL_STR@
+PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
 READLINE_INCLUDE_DIR = @READLINE_INCLUDE_DIR@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
 TCLRL_DIR = @TCLRL_DIR@
 TCLRL_LIBDIR = @TCLRL_LIBDIR@
 TCL_INCLUDE_DIR = @TCL_INCLUDE_DIR@
 TCL_LIB_SPEC = @TCL_LIB_SPEC@
 TK_LIB_SPEC = @TK_LIB_SPEC@
 VERSION = @VERSION@
-
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 lib_LTLIBRARIES = libtclreadline.la
-
 libtclreadline_la_SOURCES = config.h tclreadline.c tclreadline.h
 include_HEADERS = tclreadline.h
-
 INCLUDES = -I$(TCL_INCLUDE_DIR) -I$(READLINE_INCLUDE_DIR)
-
 libtclreadline_la_LDFLAGS = -release $(MAJOR).$(MINOR).$(PATCHLEVEL)
-
 tclrldir = @TCLRL_DIR@
 tclrl_SCRIPTS = pkgIndex.tcl tclreadlineCompleter.tcl tclreadlineInit.tcl tclreadlineSetup.tcl
-INSTALL_SCRIPT = ${INSTALL_DATA}
-
-EXTRA_DIST =      tclreadlineCompleter.tcl     aux/config.guess             aux/config.sub               aux/install-sh               aux/ltconfig                 aux/ltmain.sh                aux/missing                  aux/mkinstalldirs
-
+EXTRA_DIST = \
+    tclreadlineCompleter.tcl \
+    aux/config.guess         \
+    aux/config.sub           \
+    aux/install-sh           \
+    aux/ltconfig             \
+    aux/ltmain.sh            \
+    aux/missing              \
+    aux/mkinstalldirs
 
 @STATIC_TCLSHRL_TRUE@static_tclshrl = tclshrl
 @STATIC_TCLSHRL_TRUE@tclshrl_LDADD = libtclreadline.la $(TCL_LIB_SPEC)
 @STATIC_TCLSHRL_TRUE@tclshrl_LDFLAGS = -static
-
 @STATIC_WISHRL_TRUE@static_wishrl = wishrl
 @STATIC_WISHRL_TRUE@wishrl_LDADD = libtclreadline.la $(TCL_LIB_SPEC) $(TK_LIB_SPEC)
 @STATIC_WISHRL_TRUE@wishrl_LDFLAGS = -static
-
-bin_PROGRAMS = $(static_tclshrl) $(static_wishrl)
 tclshrl_SOURCES = tclshrl.c
 wishrl_SOURCES = wishrl.c
-
 man_MANS = tclreadline.n
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/./aux/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =  tclreadline.h tclreadlineInit.tcl \
-tclreadlineSetup.tcl tclreadline.n pkgIndex.tcl
-LTLIBRARIES =  $(lib_LTLIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I.
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libtclreadline_la_LIBADD = 
-libtclreadline_la_OBJECTS =  tclreadline.lo
-@STATIC_WISHRL_TRUE@@STATIC_TCLSHRL_FALSE@bin_PROGRAMS =  \
-@STATIC_WISHRL_TRUE@@STATIC_TCLSHRL_FALSE@wishrl$(EXEEXT)
-@STATIC_WISHRL_FALSE@@STATIC_TCLSHRL_FALSE@bin_PROGRAMS = 
-@STATIC_WISHRL_FALSE@@STATIC_TCLSHRL_TRUE@bin_PROGRAMS =  \
-@STATIC_WISHRL_FALSE@@STATIC_TCLSHRL_TRUE@tclshrl$(EXEEXT)
-@STATIC_WISHRL_TRUE@@STATIC_TCLSHRL_TRUE@bin_PROGRAMS =  \
-@STATIC_WISHRL_TRUE@@STATIC_TCLSHRL_TRUE@tclshrl$(EXEEXT) \
-@STATIC_WISHRL_TRUE@@STATIC_TCLSHRL_TRUE@wishrl$(EXEEXT)
-PROGRAMS =  $(bin_PROGRAMS)
-
-tclshrl_OBJECTS =  tclshrl.o
-@STATIC_TCLSHRL_TRUE@tclshrl_DEPENDENCIES =  libtclreadline.la
-wishrl_OBJECTS =  wishrl.o
-@STATIC_WISHRL_TRUE@wishrl_DEPENDENCIES =  libtclreadline.la
-SCRIPTS =  $(tclrl_SCRIPTS)
-
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-manndir = $(mandir)/mann
-MANS = $(man_MANS)
-
-NROFF = nroff
-HEADERS =  $(include_HEADERS)
-
-DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
-Makefile.am Makefile.in NEWS TODO aclocal.m4 config.h.in configure \
-configure.in pkgIndex.tcl.in tclreadline.h.in tclreadline.n.in \
-tclreadlineInit.tcl.in tclreadlineSetup.tcl.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
 
-TAR = tar
-GZIP_ENV = --best
-SOURCES = $(libtclreadline_la_SOURCES) $(tclshrl_SOURCES) $(wishrl_SOURCES)
-OBJECTS = $(libtclreadline_la_OBJECTS) $(tclshrl_OBJECTS) $(wishrl_OBJECTS)
-
-all: all-redirect
 .SUFFIXES:
-.SUFFIXES: .S .c .lo .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4):  configure.in 
-	cd $(srcdir) && $(ACLOCAL)
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
 
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+
+$(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 
-config.h: stamp-h
-	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
-	else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
+config.h: stamp-h1
 	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
 
-clean-hdr:
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	rm -f stamp-h1
+	touch $@
 
 distclean-hdr:
-	-rm -f config.h
-
-maintainer-clean-hdr:
-tclreadline.h: $(top_builddir)/config.status tclreadline.h.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-tclreadlineInit.tcl: $(top_builddir)/config.status tclreadlineInit.tcl.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-tclreadlineSetup.tcl: $(top_builddir)/config.status tclreadlineSetup.tcl.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-tclreadline.n: $(top_builddir)/config.status tclreadline.n.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-pkgIndex.tcl: $(top_builddir)/config.status pkgIndex.tcl.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-mostlyclean-libLTLIBRARIES:
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-
-distclean-libLTLIBRARIES:
-
-maintainer-clean-libLTLIBRARIES:
-
+	-rm -f config.h stamp-h1
+tclreadline.h: $(top_builddir)/config.status $(srcdir)/tclreadline.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+tclreadlineInit.tcl: $(top_builddir)/config.status $(srcdir)/tclreadlineInit.tcl.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+tclreadlineSetup.tcl: $(top_builddir)/config.status $(srcdir)/tclreadlineSetup.tcl.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+tclreadline.n: $(top_builddir)/config.status $(srcdir)/tclreadline.n.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+pkgIndex.tcl: $(top_builddir)/config.status $(srcdir)/pkgIndex.tcl.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	    f=$(am__strip_dir) \
+	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  p=$(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-libtclreadline.la: $(libtclreadline_la_OBJECTS) $(libtclreadline_la_DEPENDENCIES)
-	$(LINK) -rpath $(libdir) $(libtclreadline_la_LDFLAGS) $(libtclreadline_la_OBJECTS) $(libtclreadline_la_LIBADD) $(LIBS)
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-
-maintainer-clean-binPROGRAMS:
-
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libtclreadline.la: $(libtclreadline_la_OBJECTS) $(libtclreadline_la_DEPENDENCIES) 
+	$(libtclreadline_la_LINK) -rpath $(libdir) $(libtclreadline_la_OBJECTS) $(libtclreadline_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
 	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	     || test -f $$p1 \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
 	  else :; fi; \
 	done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
 	done
 
-tclshrl$(EXEEXT): $(tclshrl_OBJECTS) $(tclshrl_DEPENDENCIES)
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+tclshrl$(EXEEXT): $(tclshrl_OBJECTS) $(tclshrl_DEPENDENCIES) 
 	@rm -f tclshrl$(EXEEXT)
-	$(LINK) $(tclshrl_LDFLAGS) $(tclshrl_OBJECTS) $(tclshrl_LDADD) $(LIBS)
-
-wishrl$(EXEEXT): $(wishrl_OBJECTS) $(wishrl_DEPENDENCIES)
+	$(tclshrl_LINK) $(tclshrl_OBJECTS) $(tclshrl_LDADD) $(LIBS)
+wishrl$(EXEEXT): $(wishrl_OBJECTS) $(wishrl_DEPENDENCIES) 
 	@rm -f wishrl$(EXEEXT)
-	$(LINK) $(wishrl_LDFLAGS) $(wishrl_OBJECTS) $(wishrl_LDADD) $(LIBS)
-
+	$(wishrl_LINK) $(wishrl_OBJECTS) $(wishrl_LDADD) $(LIBS)
 install-tclrlSCRIPTS: $(tclrl_SCRIPTS)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(tclrldir)
+	test -z "$(tclrldir)" || $(MKDIR_P) "$(DESTDIR)$(tclrldir)"
 	@list='$(tclrl_SCRIPTS)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(tclrldir)/`echo $$p|sed '$(transform)'`"; \
-	    $(INSTALL_SCRIPT) $$p $(DESTDIR)$(tclrldir)/`echo $$p|sed '$(transform)'`; \
-	  else if test -f $(srcdir)/$$p; then \
-	    echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(tclrldir)/`echo $$p|sed '$(transform)'`"; \
-	    $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(tclrldir)/`echo $$p|sed '$(transform)'`; \
-	  else :; fi; fi; \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f $$d$$p; then \
+	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	    echo " $(tclrlSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(tclrldir)/$$f'"; \
+	    $(tclrlSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(tclrldir)/$$f"; \
+	  else :; fi; \
 	done
 
 uninstall-tclrlSCRIPTS:
 	@$(NORMAL_UNINSTALL)
-	list='$(tclrl_SCRIPTS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(tclrldir)/`echo $$p|sed '$(transform)'`; \
+	@list='$(tclrl_SCRIPTS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	  echo " rm -f '$(DESTDIR)$(tclrldir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(tclrldir)/$$f"; \
 	done
 
-install-mann:
-	$(mkinstalldirs) $(DESTDIR)$(manndir)
-	@list='$(mann_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tclreadline.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tclshrl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wishrl.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+install-mann: $(mann_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(manndir)" || $(MKDIR_P) "$(DESTDIR)$(manndir)"
+	@list='$(mann_MANS) $(dist_mann_MANS) $(nodist_mann_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
 	  case "$$i" in \
 	    *.n*) list="$$list $$i" ;; \
 	  esac; \
@@ -350,224 +477,355 @@
 	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
 	  else file=$$i; fi; \
 	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    n*) ;; \
+	    *) ext='n' ;; \
+	  esac; \
 	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
 	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(manndir)/$$inst"; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(manndir)/$$inst; \
+	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(manndir)/$$inst'"; \
+	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(manndir)/$$inst"; \
 	done
-
 uninstall-mann:
-	@list='$(mann_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
+	@$(NORMAL_UNINSTALL)
+	@list='$(mann_MANS) $(dist_mann_MANS) $(nodist_mann_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
 	  case "$$i" in \
 	    *.n*) list="$$list $$i" ;; \
 	  esac; \
 	done; \
 	for i in $$list; do \
 	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    n*) ;; \
+	    *) ext='n' ;; \
+	  esac; \
 	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
 	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f $(DESTDIR)$(manndir)/$$inst"; \
-	  rm -f $(DESTDIR)$(manndir)/$$inst; \
+	  echo " rm -f '$(DESTDIR)$(manndir)/$$inst'"; \
+	  rm -f "$(DESTDIR)$(manndir)/$$inst"; \
 	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-mann
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-mann
-
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
 	@list='$(include_HEADERS)'; for p in $$list; do \
-	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
-	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \
-	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
+	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
 	done
 
 uninstall-includeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	list='$(include_HEADERS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(includedir)/$$p; \
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
 	done
 
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
 # tarfile.
 distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
 	  && $(MAKE) $(AM_MAKEFLAGS) install \
 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	$(mkinstalldirs) $(distdir)/aux
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-tclreadline.lo tclreadline.o : tclreadline.c config.h tclreadline.h
-tclshrl.o: tclshrl.c config.h tclreadline.h
-wishrl.o: wishrl.c config.h tclreadline.h
-
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) \
+		$(HEADERS) config.h
+install-binPROGRAMS: install-libLTLIBRARIES
 
-install-exec-am: install-libLTLIBRARIES install-binPROGRAMS
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(tclrldir)" "$(DESTDIR)$(manndir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
 install-exec: install-exec-am
-
-install-data-am: install-tclrlSCRIPTS install-man install-includeHEADERS
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-libLTLIBRARIES uninstall-binPROGRAMS \
-		uninstall-tclrlSCRIPTS uninstall-man \
-		uninstall-includeHEADERS
-uninstall: uninstall-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) \
-		$(HEADERS) config.h
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-	$(mkinstalldirs)  $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) \
-		$(DESTDIR)$(tclrldir) $(DESTDIR)$(mandir)/mann \
-		$(DESTDIR)$(includedir)
-
 
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-libLTLIBRARIES \
-		mostlyclean-compile mostlyclean-libtool \
-		mostlyclean-binPROGRAMS mostlyclean-tags \
-		mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
 
-mostlyclean: mostlyclean-am
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
 
-clean-am:  clean-hdr clean-libLTLIBRARIES clean-compile clean-libtool \
-		clean-binPROGRAMS clean-tags clean-generic \
-		mostlyclean-am
+dvi: dvi-am
 
-clean: clean-am
+dvi-am:
 
-distclean-am:  distclean-hdr distclean-libLTLIBRARIES distclean-compile \
-		distclean-libtool distclean-binPROGRAMS distclean-tags \
-		distclean-generic clean-am
-	-rm -f libtool
+html: html-am
 
-distclean: distclean-am
-	-rm -f config.status
+info: info-am
 
-maintainer-clean-am:  maintainer-clean-hdr \
-		maintainer-clean-libLTLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-binPROGRAMS maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am: install-includeHEADERS install-man \
+	install-tclrlSCRIPTS
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man: install-mann
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-	-rm -f config.status
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
 
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
-distclean-compile clean-compile maintainer-clean-compile \
-mostlyclean-libtool distclean-libtool clean-libtool \
-maintainer-clean-libtool mostlyclean-binPROGRAMS distclean-binPROGRAMS \
-clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
-install-binPROGRAMS uninstall-tclrlSCRIPTS install-tclrlSCRIPTS \
-install-mann uninstall-mann install-man uninstall-man \
-uninstall-includeHEADERS install-includeHEADERS tags mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+ps: ps-am
 
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-man uninstall-tclrlSCRIPTS
+
+uninstall-man: uninstall-mann
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-mann install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	install-tclrlSCRIPTS installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-man uninstall-mann \
+	uninstall-tclrlSCRIPTS
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
diff -uNr tclreadline-2.1.0.orig/aclocal.m4 tclreadline-2.1.0-1rsk/aclocal.m4
--- tclreadline-2.1.0.orig/aclocal.m4	2000-12-07 18:48:04.000000000 -0600
+++ tclreadline-2.1.0-1rsk/aclocal.m4	2011-07-06 10:01:36.000000000 -0500
@@ -1,205 +1,609 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
+# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
 
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated.  We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
-  case " <<$>>CONFIG_HEADERS " in
-  *" <<$>>am_file "*<<)>>
-    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-    ;;
-  esac
-  am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(AC_AUTOCONF_VERSION, [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+
+# serial 52 AC_PROG_LIBTOOL
+
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+         [],
+         [m4_define([AC_PROVIDE_IFELSE],
+	         [m4_ifdef([AC_PROVIDE_$1],
+		           [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+  ])])
+dnl And a similar setup for Fortran 77 support
+  AC_PROVIDE_IFELSE([AC_PROG_F77],
+    [AC_LIBTOOL_F77],
+    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+      [AC_LIBTOOL_GCJ],
+      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+	[AC_LIBTOOL_GCJ],
+      [ifdef([AC_PROG_GCJ],
+	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([A][M_PROG_GCJ],
+	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([LT_AC_PROG_GCJ],
+	     [define([LT_AC_PROG_GCJ],
+		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])# _AC_PROG_LIBTOOL
+
 
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
+# AC_LIBTOOL_SETUP
+# ----------------
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.50)dnl
 AC_REQUIRE([AC_ENABLE_SHARED])dnl
 AC_REQUIRE([AC_ENABLE_STATIC])dnl
 AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
+
 AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
 dnl
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+_LT_REQUIRED_DARWIN_CHECKS
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+AC_ARG_WITH([pic],
+    [AC_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
+
+
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
 
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# --------------------------
+# Check for some things on darwin
+AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+   # By default we will add the -single_module flag. You can override
+   # by either setting the environment variable LT_MULTI_MODULE
+   # non-empty at configure time, or by adding -multi_module to the
+   # link flags.
+   echo "int foo(void){return 1;}" > conftest.c
+   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+     -dynamiclib ${wl}-single_module conftest.c
+   if test -f libconftest.dylib; then
+     lt_cv_apple_cc_single_mod=yes
+     rm -rf libconftest.dylib*
+   fi
+   rm conftest.c
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+   [lt_cv_ld_exported_symbols_list=yes],
+   [lt_cv_ld_exported_symbols_list=no])
+   LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[0123]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*)
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+   10.[[012]]*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+   10.*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
+
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+[$]*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "[$]0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$lt_target" in
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
       ;;
@@ -210,6 +614,56 @@
       LD="${LD-ld} -64"
       ;;
     esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_i386_fbsd"
+          ;;
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_x86_64_fbsd"
+          ;;
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
   fi
   rm -rf conftest*
   ;;
@@ -219,335 +673,6844 @@
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+    [AC_LANG_PUSH(C)
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)
+        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
 
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-])
+  ])
 esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $rm conftest*
 ])
 
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+if test x"[$]$2" = xyes; then
+    ifelse([$5], , :, [$5])
+else
+    ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
 
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $rm -r conftest*
+   LDFLAGS="$save_LDFLAGS"
 ])
 
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
+if test x"[$]$2" = xyes; then
+    ifelse([$4], , :, [$4])
+else
+    ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
 
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
-    # Accept absolute paths.
-changequote(,)dnl
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
     ;;
   *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
 else
-  AC_MSG_CHECKING([for non-GNU ld])
+  AC_MSG_RESULT(none)
 fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# ------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ---------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
 else
-  AC_MSG_RESULT(no)
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
 fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
 
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
-])
 
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
+# AC_LIBTOOL_DLOPEN_SELF
+# ----------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
 
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
 
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case "$enable_ltdl_convenience" in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
   esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
 
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+    	  lt_cv_dlopen_self_static, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
    fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
+
+
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+
+
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_AC_TAGVAR(hardcode_action, $1)=relink
   else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         old_striplib="$STRIP -S"
+         AC_MSG_RESULT([yes])
+       else
+  AC_MSG_RESULT([no])
+fi
+       ;;
+   *)
+  AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
+
+
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+m4_if($1,[],[
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
+[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
+[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_ARG_WITH([tags],
+    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+        [include additional configurations @<:@automatic@:>@])],
+    [tagnames="$withval"])
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+    else
+      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+    "") ;;
+    *)  AC_MSG_ERROR([invalid tag name: $tagname])
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      AC_MSG_ERROR([tag name \"$tagname\" already exists])
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  AC_LIBTOOL_LANG_CXX_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+	  AC_LIBTOOL_LANG_F77_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+	  AC_LIBTOOL_LANG_GCJ_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+	AC_LIBTOOL_LANG_RC_CONFIG
+	;;
+
+      *)
+	AC_MSG_ERROR([Unsupported tag name: $tagname])
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+  fi
+fi
+])# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 DLLs
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+# set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognize shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognize a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+    [AC_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+])# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!).  If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, lt_dlinit,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+# _LT_AC_PROG_CXXCPP
+# ------------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# -------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF
+
+# Report which library types will actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix[[4-9]]*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+  AC_PROG_LD
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  aix[[4-9]]*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+	;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    _LT_AC_TAGVAR(archive_cmds, $1)=''
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  :
+	else
+	  # We have old collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	fi
+	;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      _LT_AC_SYS_LIBPATH_AIX
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+	# Determine the default libpath from the value encoded in an empty executable.
+	_LT_AC_SYS_LIBPATH_AIX
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	# Exported symbols can be pulled into shared objects from archives
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	# This is similar to how AIX traditionally builds its shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    # as there is no search path for DLLs.
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+    _LT_AC_TAGVAR(always_export_symbols, $1)=no
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+      if test "$GXX" = yes ; then
+      output_verbose_link_cmd='echo'
+      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+      fi
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      ghcx*)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  freebsd[[12]]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  freebsd-elf*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  freebsd* | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    aCC*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+      case $host_cpu in
+      hppa*64*|ia64*) ;;
+      *)
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+    *)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case $host_cpu in
+	    hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  interix[[3-9]]*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+	# SGI C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	  else
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+	;;
+    esac
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    ;;
+  linux* | k*bsd*-gnu)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc*)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC* | pgcpp*)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+	# Compaq C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C++ 5.9
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+
+	  # Not sure whether something based on
+	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	  # would be better.
+	  output_verbose_link_cmd='echo'
+
+	  # Archives containing C++ object files must be created using
+	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	  # necessary to make sure instantiated templates are included
+	  # in the archive.
+	  _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	  ;;
+	esac
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    if test -f /usr/libexec/ld.so; then
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx*)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx*)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      lcc*)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	case $host_os in
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	  *)
+	    # The compiler driver will combine and reorder linker options,
+	    # but understands `-z linker_flag'.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	    ;;
+	esac
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+	output_verbose_link_cmd='echo'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx*)
+	# Green Hills C++ Compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	  case $host_os in
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	  *)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	  esac
+	fi
+	;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$rm -f confest.$objext
+
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_AC_TAGVAR(predep_objects,$1)=
+  _LT_AC_TAGVAR(postdep_objects,$1)=
+  _LT_AC_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+    #
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="\
+      program t
+      end
+"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix[[4-9]]*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# -------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    _LT_AC_TAGVAR(compiler, $1) \
+    _LT_AC_TAGVAR(CC, $1) \
+    _LT_AC_TAGVAR(LD, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+    _LT_AC_TAGVAR(predep_objects, $1) \
+    _LT_AC_TAGVAR(postdep_objects, $1) \
+    _LT_AC_TAGVAR(predeps, $1) \
+    _LT_AC_TAGVAR(postdeps, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
+    _LT_AC_TAGVAR(archive_cmds, $1) \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(postinstall_cmds, $1) \
+    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+    _LT_AC_TAGVAR(no_undefined_flag, $1) \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+    _LT_AC_TAGVAR(hardcode_automatic, $1) \
+    _LT_AC_TAGVAR(module_cmds, $1) \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
+    _LT_AC_TAGVAR(exclude_expsyms, $1) \
+    _LT_AC_TAGVAR(include_expsyms, $1); do
+
+    case $var in
+    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(module_cmds, $1) | \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\[$]0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+    ;;
+  esac
+
+ifelse([$1], [],
+  [cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  AC_MSG_NOTICE([creating $ofile])],
+  [cfgfile="$ofile"])
+
+  cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+
+# Symbols that must always be exported.
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
+
+__EOF__
+
+ifelse([$1],[], [
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+])
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+])# AC_LIBTOOL_CONFIG
+
+
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([LT_AC_PROG_SED])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux* | k*bsd*-gnu)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
+    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+])
+
+
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+  ;;
+  *)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+],[
+  runpath_var=
+  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_AC_TAGVAR(archive_cmds, $1)=
+  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+  _LT_AC_TAGVAR(module_cmds, $1)=
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(always_export_symbols, $1)=no
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_AC_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  _LT_CC_BASENAME([$compiler])
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=no
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    interix[[3-9]]*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_AC_TAGVAR(archive_cmds, $1)=''
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  :
+	  else
+  	  # We have old collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 _LT_AC_SYS_LIBPATH_AIX
+	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      # see comment about different semantics on the GNU ld section
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    bsdi[[45]]*)
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    freebsd1*)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $rm conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
   fi
+  ;;
+esac
+])# AC_LIBTOOL_PROG_LD_SHLIBS
+
+
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
 ])
 
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
 
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
 
-# Define a conditional.
+# Cheap backport of AS_EXECUTABLE_P and required macros
+# from Autoconf 2.59; we should not use $as_executable_p directly.
+
+# _AS_TEST_PREPARE
+# ----------------
+m4_ifndef([_AS_TEST_PREPARE],
+[m4_defun([_AS_TEST_PREPARE],
+[if test -x / >/dev/null 2>&1; then
+  as_executable_p='test -x'
+else
+  as_executable_p='test -f'
+fi
+])])# _AS_TEST_PREPARE
+
+# AS_EXECUTABLE_P
+# ---------------
+# Check whether a file is executable.
+m4_ifndef([AS_EXECUTABLE_P],
+[m4_defun([AS_EXECUTABLE_P],
+[AS_REQUIRE([_AS_TEST_PREPARE])dnl
+$as_executable_p $1[]dnl
+])])# AS_EXECUTABLE_P
+
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.10.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.10.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
 
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
 else
   $1_TRUE='#'
   $1_FALSE=
-fi])
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+    dirpart=`AS_DIRNAME("$mf")`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`AS_DIRNAME(["$file"])`
+    AS_MKDIR_P([$dirpart/$fdir])
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 13
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.60])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+                  [_AM_DEPENDENCIES(OBJC)],
+                  [define([AC_PROG_OBJC],
+                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
 
diff -uNr tclreadline-2.1.0.orig/aux/config.guess tclreadline-2.1.0-1rsk/aux/config.guess
--- tclreadline-2.1.0.orig/aux/config.guess	2000-09-29 11:29:01.000000000 -0500
+++ tclreadline-2.1.0-1rsk/aux/config.guess	2011-07-06 10:01:49.000000000 -0500
@@ -1,8 +1,11 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 #   Free Software Foundation, Inc.
-#
+
+timestamp='2008-01-08'
+
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
@@ -15,199 +18,294 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-# Written by Per Bothner <bothner@cygnus.com>.
-# Please send patches to <config-patches@gnu.org>.
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
 # exits with 0.  Otherwise, it exits with 1.
 #
 # The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
+# don't specify an explicit build system type.
 
-# Use $HOST_CC if defined. $CC may point to a cross-compiler
-if test x"$CC_FOR_BUILD" = x; then
-  if test x"$HOST_CC" != x; then
-    CC_FOR_BUILD="$HOST_CC"
-  else
-    if test x"$CC" != x; then
-      CC_FOR_BUILD="$CC"
-    else
-      CC_FOR_BUILD=cc
-    fi
-  fi
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
 fi
 
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
+# (ghazi@noc.rutgers.edu 1994-08-24)
 if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
 	PATH=$PATH:/.attbin ; export PATH
 fi
 
 UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
 UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
-
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
-	# Netbsd (nbsd) targets should (where applicable) match one or
+	# NetBSD (nbsd) targets should (where applicable) match one or
 	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
 	# compatibility and a consistent mechanism for selecting the
 	# object file format.
-	# Determine the machine/vendor (is the vendor relevant).
-	case "${UNAME_MACHINE}" in
-	    amiga) machine=m68k-cbm ;;
-	    arm32) machine=arm-unknown ;;
-	    atari*) machine=m68k-atari ;;
-	    sun3*) machine=m68k-sun ;;
-	    mac68k) machine=m68k-apple ;;
-	    macppc) machine=powerpc-apple ;;
-	    hp3[0-9][05]) machine=m68k-hp ;;
-	    ibmrt|romp-ibm) machine=romp-ibm ;;
-	    *) machine=${UNAME_MACHINE}-unknown ;;
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
 	esac
-	# The Operating System including object format.
-	if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-		| grep __ELF__ >/dev/null
-	then
-	    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-	    # Return netbsd for either.  FIX?
-	    os=netbsd
-	else
-	    os=netbsdelf
-	fi
 	# The OS release
-	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
-	exit 0 ;;
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
     alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
+	case $UNAME_RELEASE in
+	*4.0)
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	cat <<EOF >$dummy.s
-	.data
-\$Lformat:
-	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-
-	.text
-	.globl main
-	.align 4
-	.ent main
-main:
-	.frame \$30,16,\$26,0
-	ldgp \$29,0(\$27)
-	.prologue 1
-	.long 0x47e03d80 # implver \$0
-	lda \$2,-1
-	.long 0x47e20c21 # amask \$2,\$1
-	lda \$16,\$Lformat
-	mov \$0,\$17
-	not \$1,\$18
-	jsr \$26,printf
-	ldgp \$29,0(\$26)
-	mov 0,\$16
-	jsr \$26,exit
-	.end main
-EOF
-	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		case `./$dummy` in
-			0-0)
-				UNAME_MACHINE="alpha"
-				;;
-			1-0)
-				UNAME_MACHINE="alphaev5"
-				;;
-			1-1)
-				UNAME_MACHINE="alphaev56"
-				;;
-			1-101)
-				UNAME_MACHINE="alphapca56"
-				;;
-			2-303)
-				UNAME_MACHINE="alphaev6"
-				;;
-			2-307)
-				UNAME_MACHINE="alphaev67"
-				;;
-		esac
-	fi
-	rm -f $dummy.s $dummy
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
 	# of the specific Alpha model?
 	echo alpha-pc-interix
-	exit 0 ;;
+	exit ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
-	exit 0 ;;
+	exit ;;
     Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-cbm-sysv4
-	exit 0;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	echo m68k-unknown-sysv4
+	exit ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
-    arc64:OpenBSD:*:*)
-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hkmips:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
-	exit 0 ;;
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
-    SR2?01:HI-UX/MPP:*:*)
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
+	exit ;;
     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -215,25 +313,32 @@
 	else
 		echo pyramid-pyramid-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
-	exit 0 ;;
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
 	# it's likely to be more like Solaris than SunOS4.
 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:*:*)
 	case "`/usr/bin/arch -k`" in
 	    Series*|S4*)
@@ -242,12 +347,12 @@
 	esac
 	# Japanese Language versions have a version number like `4.1.3-JL'.
 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
+	exit ;;
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
 	case "`/bin/arch`" in
 	    sun3)
@@ -257,13 +362,10 @@
 		echo sparc-sun-sunos${UNAME_RELEASE}
 		;;
 	esac
-	exit 0 ;;
+	exit ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -274,50 +376,42 @@
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
         echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
         echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
-    sun3*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
+	exit ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 #ifdef __cplusplus
 #include <stdio.h>  /* for printf() prototype */
@@ -339,24 +433,33 @@
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy \
-	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
 	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
-	exit 0 ;;
+	exit ;;
     m88k:CX/UX:7*:*)
 	echo m88k-harris-cxux7
-	exit 0 ;;
+	exit ;;
     m88k:*:4*:R4*)
 	echo m88k-motorola-sysv4
-	exit 0 ;;
+	exit ;;
     m88k:*:3*:R3*)
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -372,31 +475,40 @@
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit 0 ;;
+ 	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
-	exit 0 ;;
+	exit ;;
     M88*:*:R3*:*)
 	# Delta 88k system running SVR3
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
 	echo m88k-tektronix-sysv3
-	exit 0 ;;
+	exit ;;
     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
 	echo m68k-tektronix-bsd
-	exit 0 ;;
+	exit ;;
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
+	exit ;;
     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i?86:AIX:*:*)
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
 	echo i386-ibm-aix
-	exit 0 ;;
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
 		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>
 
@@ -408,18 +520,21 @@
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
-		rm -f $dummy.c $dummy
-		echo rs6000-ibm-aix3.2.5
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
 	else
 		echo rs6000-ibm-aix3.2
 	fi
-	exit 0 ;;
-    *:AIX:*:4)
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+	exit ;;
+    *:AIX:*:[456])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
 	else
 		IBM_ARCH=powerpc
@@ -427,37 +542,54 @@
 	if [ -x /usr/bin/oslevel ] ; then
 		IBM_REV=`/usr/bin/oslevel`
 	else
-		IBM_REV=4.${UNAME_RELEASE}
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
-	exit 0 ;;
+	exit ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
-	exit 0 ;;
+	exit ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
+	exit ;;                             # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
-	exit 0 ;;
+	exit ;;
     DPX/2?00:B.O.S.:*:*)
 	echo m68k-bull-sysv3
-	exit 0 ;;
+	exit ;;
     9000/[34]??:4.3bsd:1.*:*)
 	echo m68k-hp-bsd
-	exit 0 ;;
+	exit ;;
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
-	exit 0 ;;
+	exit ;;
     9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
 	    9000/31? )            HP_ARCH=m68000 ;;
 	    9000/[34]?? )         HP_ARCH=m68k ;;
 	    9000/[678][0-9][0-9])
-              sed 's/^              //' << EOF >$dummy.c
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
 
               #define _HPUX_SOURCE
               #include <stdlib.h>
@@ -490,13 +622,39 @@
                   exit (0);
               }
 EOF
-	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-	rm -f $dummy.c $dummy
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
 	esac
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
     3050*:HI-UX:*:*)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
 	int
@@ -522,447 +680,491 @@
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
 	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
+	exit ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
 	echo hppa1.1-hp-bsd
-	exit 0 ;;
+	exit ;;
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
-	exit 0 ;;
-    *9??*:MPE/iX:*:*)
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
-	exit 0 ;;
+	exit ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
-	exit 0 ;;
+	exit ;;
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
-	exit 0 ;;
-    i?86:OSF1:*:*)
+	exit ;;
+    i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
 	else
 	    echo ${UNAME_MACHINE}-unknown-osf1
 	fi
-	exit 0 ;;
+	exit ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
-    hppa*:OpenBSD:*:*)
-	echo hppa-unknown-openbsd
-	exit 0 ;;
+	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit 0 ;;
+        exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit 0 ;;
+        exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit 0 ;;
+        exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit 0 ;;
+        exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit 0 ;;
-    CRAY*X-MP:*:*:*)
-	echo xmp-cray-unicos
-        exit 0 ;;
+        exit ;;
     CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
-	exit 0 ;;
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*T3E:*:*:*)
-	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY-2:*:*:*)
-	echo cray2-cray-unicos
-        exit 0 ;;
-    F300:UNIX_System_V:*:*)
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
-    F301:UNIX_System_V:*:*)
-       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
-       exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sparc*:BSD/OS:*:*)
 	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
-    i*:MINGW*:*)
+	exit ;;
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    EM64T | authenticamd)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i386-pc-interix
-	exit 0 ;;
+	echo i586-pc-interix
+	exit ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
-	exit 0 ;;
+	exit ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     *:GNU:*:*)
+	# the GNU system
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
-    *:Linux:*:*)
-
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
 	# problems with other programs or directories called `ld' in the path.
-	ld_help_string=`cd /; ld --help 2>&1`
-	ld_supported_emulations=`echo $ld_help_string \
-			 | sed -ne '/supported emulations:/!d
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
 				    s/[ 	][ 	]*/ /g
-				    s/.*supported emulations: *//
+				    s/.*supported targets: *//
 				    s/ .*//
 				    p'`
-        case "$ld_supported_emulations" in
-	  *ia64)
-		echo "${UNAME_MACHINE}-unknown-linux"
-		exit 0
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
 		;;
-	  i?86linux)
+	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0
-		;;
-	  elf_i?86)
-		echo "${UNAME_MACHINE}-pc-linux"
-		exit 0
-		;;
-	  i?86coff)
+		exit ;;
+	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0
-		;;
-	  sparclinux)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
-		exit 0
-		;;
-	  armlinux)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
-		exit 0
-		;;
-	  elf32arm*)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
-		exit 0
-		;;
-	  armelf_linux*)
-		echo "${UNAME_MACHINE}-unknown-linux-gnu"
-		exit 0
-		;;
-	  m68klinux)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
-		exit 0
-		;;
-	  elf32ppc | elf32ppclinux)
-		# Determine Lib Version
-		cat >$dummy.c <<EOF
-#include <features.h>
-#if defined(__GLIBC__)
-extern char __libc_version[];
-extern char __libc_release[];
-#endif
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#if defined(__GLIBC__)
-  printf("%s %s\n", __libc_version, __libc_release);
-#else
-  printf("unkown\n");
-#endif
-  return 0;
-}
-EOF
-		LIBC=""
-		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
-		if test "$?" = 0 ; then
-			./$dummy | grep 1\.99 > /dev/null
-			if test "$?" = 0 ; then
-				LIBC="libc1"
-			fi
-		fi
-		rm -f $dummy.c $dummy
-		echo powerpc-unknown-linux-gnu${LIBC}
-		exit 0
-		;;
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
 	esac
-
-	if test "${UNAME_MACHINE}" = "alpha" ; then
-		cat <<EOF >$dummy.s
-			.data
-		\$Lformat:
-			.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-
-			.text
-			.globl main
-			.align 4
-			.ent main
-		main:
-			.frame \$30,16,\$26,0
-			ldgp \$29,0(\$27)
-			.prologue 1
-			.long 0x47e03d80 # implver \$0
-			lda \$2,-1
-			.long 0x47e20c21 # amask \$2,\$1
-			lda \$16,\$Lformat
-			mov \$0,\$17
-			not \$1,\$18
-			jsr \$26,printf
-			ldgp \$29,0(\$26)
-			mov 0,\$16
-			jsr \$26,exit
-			.end main
-EOF
-		LIBC=""
-		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-		if test "$?" = 0 ; then
-			case `./$dummy` in
-			0-0)
-				UNAME_MACHINE="alpha"
-				;;
-			1-0)
-				UNAME_MACHINE="alphaev5"
-				;;
-			1-1)
-				UNAME_MACHINE="alphaev56"
-				;;
-			1-101)
-				UNAME_MACHINE="alphapca56"
-				;;
-			2-303)
-				UNAME_MACHINE="alphaev6"
-				;;
-			2-307)
-				UNAME_MACHINE="alphaev67"
-				;;
-			esac
-
-			objdump --private-headers $dummy | \
-			  grep ld.so.1 > /dev/null
-			if test "$?" = 0 ; then
-				LIBC="libc1"
-			fi
-		fi
-		rm -f $dummy.s $dummy
-		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
-	elif test "${UNAME_MACHINE}" = "mips" ; then
-	  cat >$dummy.c <<EOF
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __MIPSEB__
-  printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
-	  rm -f $dummy.c $dummy
-	elif test "${UNAME_MACHINE}" = "s390"; then
-	  echo s390-ibm-linux && exit 0
-	else
-	  # Either a pre-BFD a.out linker (linux-gnuoldld)
-	  # or one that does not give us useful --help.
-	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	  # If ld does not provide *any* "supported emulations:"
-	  # that means it is gnuoldld.
-	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
-	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-
-	  case "${UNAME_MACHINE}" in
-	  i?86)
-	    VENDOR=pc;
-	    ;;
-	  *)
-	    VENDOR=unknown;
-	    ;;
-	  esac
-	  # Determine whether the default compiler is a.out or elf
-	  cat >$dummy.c <<EOF
-#include <features.h>
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __ELF__
-# ifdef __GLIBC__
-#  if __GLIBC__ >= 2
-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-#  else
-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-#  endif
-# else
-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
-  return 0;
-}
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
 EOF
-	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
-	  rm -f $dummy.c $dummy
-	fi ;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
-# are messed up and put the nodename in both sysname and nodename.
-    i?86:DYNIX/ptx:4*:*)
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
 	echo i386-sequent-sysv4
-	exit 0 ;;
-    i?86:UNIX_SV:4.2MP:2.*)
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
         # Unixware is an offshoot of SVR4, but it has its own version
         # number series starting with 2...
         # I am not positive that other SVR4 systems won't match this,
 	# I just have to hope.  -- rms.
         # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
-    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
 		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
 	else
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
-	exit 0 ;;
-    i?86:*:5:7*)
-        # Fixed at (any) Pentium or better
-        UNAME_MACHINE=i586
-        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
-	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
-	else
-	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-	fi
-	exit 0 ;;
-    i?86:*:3.2:*)
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
 		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
 	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
 			&& UNAME_MACHINE=i586
-		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
 			&& UNAME_MACHINE=i686
-		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
 			&& UNAME_MACHINE=i686
 		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
-    i?86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
+	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
         # the processor, so we play safe by assuming i386.
 	echo i386-pc-msdosdjgpp
-        exit 0 ;;
+        exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
-	exit 0 ;;
+	exit ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
-	exit 0 ;;
+	exit ;;
     i860:*:4.*:*) # i860-SVR4
 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
 	else # Add other i860-SVR4 vendors below as they are discovered.
 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
 	fi
-	exit 0 ;;
+	exit ;;
     mini*:CTIX:SYS*5:*)
 	# "miniframe"
 	echo m68010-convergent-sysv
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:*)
+          && { echo i486-ncr-sysv4; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
-	exit 0 ;;
-    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+	exit ;;
+    rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RM*:ReliantUNIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     *:SINIX-*:*:*)
 	if uname -p 2>/dev/null >/dev/null ; then
 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -970,80 +1172,164 @@
 	else
 		echo ns32k-sni-sysv
 	fi
-	exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
-        exit 0 ;;
+        exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
 	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
+	exit ;;
     *:*:*:FTX*)
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
-	exit 0 ;;
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
-    news*:NEWS-OS:*:6*)
+	exit ;;
+    news*:NEWS-OS:6*:*)
 	echo mips-sony-newsos6
-	exit 0 ;;
+	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit 0 ;;
+        exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
-	exit 0 ;;
+	exit ;;
     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
 	echo powerpc-apple-beos
-	exit 0 ;;
+	exit ;;
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
-	exit 0 ;;
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Darwin:*:*)
-	echo `uname -p`-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	if test "${UNAME_MACHINE}" = "x86pc"; then
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
 		UNAME_MACHINE=pc
 	fi
-	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
-	exit 0 ;;
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
-	exit 0 ;;
-    NSR-W:NONSTOP_KERNEL:*:*)
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
     BS2000:POSIX*:*:*)
 	echo bs2000-siemens-sysv
-	exit 0 ;;
+	exit ;;
     DS/*:UNIX_System_V:*:*)
 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
 
+eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
 # include <sys/types.h>
@@ -1069,7 +1355,7 @@
 #endif
 
 #if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
+  printf ("arm-acorn-riscix\n"); exit (0);
 #endif
 
 #if defined (hp300) && !defined (hpux)
@@ -1130,11 +1416,24 @@
 #endif
 
 #if defined (vax)
-#if !defined (ultrix)
-  printf ("vax-dec-bsd\n"); exit (0);
-#else
-  printf ("vax-dec-ultrix\n"); exit (0);
-#endif
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
 #endif
 
 #if defined (alliant) && defined (i860)
@@ -1145,12 +1444,12 @@
 }
 EOF
 
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
-rm -f $dummy.c $dummy
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
 
 # Apollos put the system type in the environment.
 
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
 
 # Convex versions that predate uname can use getsysinfo(1)
 
@@ -1159,25 +1458,69 @@
     case `getsysinfo -f cpu_type` in
     c1*)
 	echo c1-convex-bsd
-	exit 0 ;;
+	exit ;;
     c2*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     c34*)
 	echo c34-convex-bsd
-	exit 0 ;;
+	exit ;;
     c38*)
 	echo c38-convex-bsd
-	exit 0 ;;
+	exit ;;
     c4*)
 	echo c4-convex-bsd
-	exit 0 ;;
+	exit ;;
     esac
 fi
 
-#echo '(Unable to guess system type)' 1>&2
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
 
 exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff -uNr tclreadline-2.1.0.orig/aux/config.sub tclreadline-2.1.0-1rsk/aux/config.sub
--- tclreadline-2.1.0.orig/aux/config.sub	2000-09-29 11:29:01.000000000 -0500
+++ tclreadline-2.1.0-1rsk/aux/config.sub	2011-07-06 10:01:49.000000000 -0500
@@ -1,8 +1,11 @@
 #! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 #   Free Software Foundation, Inc.
-#
+
+timestamp='2008-01-16'
+
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
 # can handle that machine.  It does not imply ALL GNU software can.
@@ -19,16 +22,17 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-# Written by Per Bothner <bothner@cygnus.com>.
-# Please send patches to <config-patches@gnu.org>.
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -50,30 +54,75 @@
 #	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
 # It is wrong to echo any other type of specification.
 
-if [ x$1 = x ]
-then
-	echo Configuration name missing. 1>&2
-	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
-	echo "or     $0 ALIAS" 1>&2
-	echo where ALIAS is a recognized configuration type. 1>&2
-	exit 1
-fi
+me=`echo "$0" | sed -e 's,.*/,,'`
 
-# First pass through any local machine types.
-case $1 in
-	*local*)
-		echo $1
-		exit 0
-		;;
-	*)
-	;;
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
 esac
 
 # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -99,7 +148,7 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
@@ -113,9 +162,21 @@
 		os=-vxworks
 		basic_machine=$1
 		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -132,6 +193,10 @@
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -171,30 +236,74 @@
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
-		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
-		| 580 | i960 | h8300 \
-		| x86 | ppcbe | mipsbe | mipsle | shbe | shle | armbe | armle \
-		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
-		| hppa64 \
-		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
-		| alphaev6[78] \
-		| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
-		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
-		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
-		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-		| mips64vr5000 | miprs64vr5000el | mcore \
-		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
-		| thumb | d10v | fr30 | avr)
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| mt \
+	| msp430 \
+	| nios | nios2 \
+	| ns16k | ns32k \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
 		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
-	i[34567]86)
+	i*86 | x86_64)
 	  basic_machine=$basic_machine-pc
 	  ;;
 	# Object if more than one company name word.
@@ -203,28 +312,70 @@
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
-	# FIXME: clean up the formatting here.
-	vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
-	      | xmp-* | ymp-* \
-	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* | armbe-* | armle-* \
-	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
-	      | hppa2.0n-* | hppa64-* \
-	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
-	      | alphaev6[78]-* \
-	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
-	      | clipper-* | orion-* \
-	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-* \
-	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-	      | mipstx39-* | mipstx39el-* | mcore-* \
-	      | f301-* | armv*-* | s390-* | sv1-* | t3e-* \
-	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
-	      | bs2000-*)
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -242,6 +393,9 @@
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
 	adobe68k)
 		basic_machine=m68010-adobe
 		os=-scout
@@ -256,19 +410,25 @@
 		basic_machine=a29k-none
 		os=-bsd
 		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	amdahl)
 		basic_machine=580-amdahl
 		os=-sysv
 		;;
 	amiga | amiga-*)
-		basic_machine=m68k-cbm
+		basic_machine=m68k-unknown
 		;;
 	amigaos | amigados)
-		basic_machine=m68k-cbm
+		basic_machine=m68k-unknown
 		os=-amigaos
 		;;
 	amigaunix | amix)
-		basic_machine=m68k-cbm
+		basic_machine=m68k-unknown
 		os=-sysv4
 		;;
 	apollo68)
@@ -287,6 +447,18 @@
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -307,27 +479,45 @@
 		basic_machine=c38-convex
 		os=-bsd
 		;;
-	cray | ymp)
-		basic_machine=ymp-cray
+	cray | j90)
+		basic_machine=j90-cray
 		os=-unicos
 		;;
-	cray2)
-		basic_machine=cray2-cray
-		os=-unicos
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
 		;;
-	[ctj]90-cray)
-		basic_machine=c90-cray
-		os=-unicos
+	cr16)
+		basic_machine=cr16-unknown
+		os=-elf
 		;;
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
 	da30 | da30-*)
 		basic_machine=m68k-da30
 		;;
 	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
 		basic_machine=mips-dec
 		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
 	delta | 3300 | motorola-3300 | motorola-delta \
 	      | 3300-motorola | delta-motorola)
 		basic_machine=m68k-motorola
@@ -336,6 +526,10 @@
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -369,6 +563,10 @@
 		basic_machine=tron-gmicro
 		os=-sysv
 		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
 	h3050r* | hiux*)
 		basic_machine=hppa1.1-hitachi
 		os=-hiuxwe2
@@ -444,19 +642,19 @@
 		basic_machine=i370-ibm
 		;;
 # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[34567]86v32)
+	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
 		;;
-	i[34567]86v4*)
+	i*86v4*)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv4
 		;;
-	i[34567]86v)
+	i*86v)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv
 		;;
-	i[34567]86sol2)
+	i*86sol2)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-solaris2
 		;;
@@ -468,14 +666,6 @@
 		basic_machine=i386-unknown
 		os=-vsta
 		;;
-	i386-go32 | go32)
-		basic_machine=i386-unknown
-		os=-go32
-		;;
-	i386-mingw32 | mingw32)
-		basic_machine=i386-unknown
-		os=-mingw32
-		;;
 	iris | iris4d)
 		basic_machine=mips-sgi
 		case $os in
@@ -490,6 +680,14 @@
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -501,6 +699,14 @@
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -508,32 +714,27 @@
 		basic_machine=m68k-atari
 		os=-mint
 		;;
-	mipsel*-linux*)
-		basic_machine=mipsel-unknown
-		os=-linux-gnu
-		;;
-	mips*-linux*)
-		basic_machine=mips-unknown
-		os=-linux-gnu
-		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
 		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
 	msdos)
-		basic_machine=i386-unknown
+		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -595,6 +796,10 @@
 		basic_machine=i960-intel
 		os=-mon960
 		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
 	np1)
 		basic_machine=np1-gould
 		;;
@@ -605,6 +810,13 @@
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
 		os=-ose
@@ -621,51 +833,89 @@
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
 	pbb)
 		basic_machine=m68k-tti
 		;;
-        pc532 | pc532-*)
+	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pentium | p5 | k5 | k6 | nexen)
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
-	pentiumpro | p6 | 6x86)
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
 		basic_machine=i686-pc
 		;;
-	pentiumii | pentium2)
+	pentium4)
 		basic_machine=i786-pc
 		;;
-	pentium-* | p5-* | k5-* | k6-* | nexen-*)
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumpro-* | p6-* | 6x86-*)
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumii-* | pentium2-*)
+	pentium4-*)
 		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pn)
 		basic_machine=pn-gould
 		;;
-	power)	basic_machine=rs6000-ibm
+	power)	basic_machine=power-ibm
 		;;
 	ppc)	basic_machine=powerpc-unknown
-	        ;;
+		;;
 	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
-	        ;;
+		;;
 	ppcle-* | powerpclittle-*)
 		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	ps2)
 		basic_machine=i386-ibm
 		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -676,10 +926,30 @@
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
 	sa29200)
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
 	sequent)
 		basic_machine=i386-sequent
 		;;
@@ -687,7 +957,13 @@
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
-	sparclite-wrs)
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
 		;;
@@ -754,18 +1030,46 @@
 		os=-dynix
 		;;
 	t3e)
-		basic_machine=t3e-cray
+		basic_machine=alphaev5-cray
 		os=-unicos
 		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
 	tx39el)
 		basic_machine=mipstx39el-unknown
 		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
 	udi29k)
 		basic_machine=a29k-amd
 		os=-udi
@@ -787,8 +1091,8 @@
 		os=-vms
 		;;
 	vpp*|vx|vx-*)
-               basic_machine=f301-fujitsu
-               ;;
+		basic_machine=f301-fujitsu
+		;;
 	vxworks960)
 		basic_machine=i960-wrs
 		os=-vxworks
@@ -809,13 +1113,17 @@
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
-	xmp)
-		basic_machine=xmp-cray
-		os=-unicos
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
 		;;
-        xps | xps100)
+	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
 	z8k-*-coff)
 		basic_machine=z8k-unknown
 		os=-sim
@@ -836,32 +1144,35 @@
 	op60c)
 		basic_machine=hppa1.1-oki
 		;;
-	mips)
-		if [ x$os = x-linux-gnu ]; then
-			basic_machine=mips-unknown
-		else
-			basic_machine=mips-mips
-		fi
-		;;
 	romp)
 		basic_machine=romp-ibm
 		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
 	vax)
 		basic_machine=vax-dec
 		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
 	pdp11)
 		basic_machine=pdp11-dec
 		;;
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sparc | sparcv9)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
-        cydra)
+	cydra)
 		basic_machine=cydra-cydrome
 		;;
 	orion)
@@ -876,9 +1187,8 @@
 	pmac | pmac-mpw)
 		basic_machine=powerpc-apple
 		;;
-	c4x*)
-		basic_machine=c4x-none
-		os=-coff
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
 		;;
 	*)
 		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
@@ -932,35 +1242,49 @@
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit*)
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
 		case $basic_machine in
-		    x86-* | i[34567]86-*)
+		    x86-* | i*86-*)
 			;;
 		    *)
 			os=-nto$os
 			;;
 		esac
 		;;
+	-nto-qnx*)
+		;;
 	-nto*)
-		os=-nto-qnx
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
 		os=`echo $os | sed -e 's|mac|macos|'`
 		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -973,6 +1297,9 @@
 	-opened*)
 		os=-openedition
 		;;
+        -os400*)
+		os=-os400
+		;;
 	-wince*)
 		os=-wince
 		;;
@@ -991,16 +1318,25 @@
 	-acis*)
 		os=-aos
 		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
 	-386bsd)
 		os=-bsd
 		;;
 	-ctix* | -uts*)
 		os=-sysv
 		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
 	-ns2 )
-	        os=-nextstep2
+		os=-nextstep2
 		;;
-	-nsk)
+	-nsk*)
 		os=-nsk
 		;;
 	# Preserve the version number of sinix5.
@@ -1010,6 +1346,9 @@
 	-sinix*)
 		os=-sysv4
 		;;
+        -tpf*)
+		os=-tpf
+		;;
 	-triton*)
 		os=-sysv3
 		;;
@@ -1037,8 +1376,17 @@
 	-xenix)
 		os=-xenix
 		;;
-        -*mint | -*MiNT)
-	        os=-mint
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
 		;;
 	-none)
 		;;
@@ -1062,6 +1410,12 @@
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1071,7 +1425,14 @@
 	arm*-semi)
 		os=-aout
 		;;
-        pdp11-*)
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
 		os=-none
 		;;
 	*-dec | vax-*)
@@ -1092,12 +1453,18 @@
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
 	mips*-*)
 		os=-elf
 		;;
+	or32-*)
+		os=-coff
+		;;
 	*-tti)	# must be before sparc entry or we get the wrong os.
 		os=-sysv3
 		;;
@@ -1107,9 +1474,15 @@
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
+    	*-knuth)
+		os=-mmixware
+		;;
 	*-wec)
 		os=-proelf
 		;;
@@ -1161,25 +1534,25 @@
 	*-next)
 		os=-nextstep3
 		;;
-        *-gould)
+	*-gould)
 		os=-sysv
 		;;
-        *-highlevel)
+	*-highlevel)
 		os=-bsd
 		;;
 	*-encore)
 		os=-bsd
 		;;
-        *-sgi)
+	*-sgi)
 		os=-irix
 		;;
-        *-siemens)
+	*-siemens)
 		os=-sysv4
 		;;
 	*-masscomp)
 		os=-rtu
 		;;
-	f301-fujitsu)
+	f30[01]-fujitsu | f700-fujitsu)
 		os=-uxpv
 		;;
 	*-rom68k)
@@ -1242,10 +1615,16 @@
 			-mvs* | -opened*)
 				vendor=ibm
 				;;
+			-os400*)
+				vendor=ibm
+				;;
 			-ptx*)
 				vendor=sequent
 				;;
-			-vxsim* | -vxworks*)
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
 				vendor=wrs
 				;;
 			-aux*)
@@ -1257,12 +1636,23 @@
 			-mpw* | -macos*)
 				vendor=apple
 				;;
-			-*mint | -*MiNT)
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 				vendor=atari
 				;;
+			-vos*)
+				vendor=stratus
+				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;
 esac
 
 echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff -uNr tclreadline-2.1.0.orig/aux/depcomp tclreadline-2.1.0-1rsk/aux/depcomp
--- tclreadline-2.1.0.orig/aux/depcomp	1969-12-31 18:00:00.000000000 -0600
+++ tclreadline-2.1.0-1rsk/aux/depcomp	2011-07-06 10:01:49.000000000 -0500
@@ -0,0 +1,589 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2007-03-29.01
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -uNr tclreadline-2.1.0.orig/aux/install-sh tclreadline-2.1.0-1rsk/aux/install-sh
--- tclreadline-2.1.0.orig/aux/install-sh	2000-03-11 03:25:38.000000000 -0600
+++ tclreadline-2.1.0-1rsk/aux/install-sh	2011-07-06 10:01:49.000000000 -0500
@@ -1,251 +1,519 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2006-12-25.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
 #
-# Copyright 1991 by the Massachusetts Institute of Technology
 #
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
+# FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
 # `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
 
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
 
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Desired mode of installed file.
+mode=0755
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
+stripcmd=
 
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
+src=
+dst=
+dir_arg=
+dst_arg=
 
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
+copy_on_change=false
+no_target_directory=
 
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
 
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
 
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
 
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
 
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
 
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
+    -C) copy_on_change=true;;
 
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
+    -d) dir_arg=true;;
 
-	pathcomp="${pathcomp}/"
-done
-fi
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
 
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
+    --help) echo "$usage"; exit $?;;
 
-# If we're going to rename the final executable, determine the name now.
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
+    -o) chowncmd="$chownprog $2"
+	shift;;
 
-# don't allow the sed command to completely eliminate the filename
+    -s) stripcmd=$stripprog;;
 
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
 
-# Make a temp file name in the proper directory.
+    *)  break;;
+  esac
+  shift
+done
 
-	dsttmp=$dstdir/#inst.$$#
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
 
-# Move or copy the file name to the temp name
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
 
-	$doit $instcmd $src $dsttmp &&
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
 
-	trap "rm -f ${dsttmp}" 0 &&
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
 
-# and set any options; do chmod last to preserve setuid bits
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
 
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-# Now rename the file to the real destination.
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
 
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
 
-fi &&
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
 
+    trap '' 0
+  fi
+done
 
-exit 0
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -uNr tclreadline-2.1.0.orig/aux/ltmain.sh tclreadline-2.1.0-1rsk/aux/ltmain.sh
--- tclreadline-2.1.0.orig/aux/ltmain.sh	2000-09-29 11:29:01.000000000 -0500
+++ tclreadline-2.1.0-1rsk/aux/ltmain.sh	2008-10-05 01:25:35.000000000 -0500
@@ -1,7 +1,8 @@
 # ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+# NOTE: Changing this file will not affect anything until you rerun configure.
 #
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008  Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
@@ -16,13 +17,49 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.26
+TIMESTAMP=" (1.1220.2.492 2008/01/30 06:40:56)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
 # Check that we have a working $echo.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
@@ -35,7 +72,7 @@
   :
 else
   # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi
 
 if test "X$1" = X--fallback-echo; then
@@ -44,19 +81,9 @@
   cat <<EOF
 $*
 EOF
-  exit 0
+  exit $EXIT_SUCCESS
 fi
 
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.3.5
-TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
-
 default_mode=
 help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
@@ -66,33 +93,50 @@
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
+  ;;
+esac
 
 # NLS nuisances.
 # Only set LANG and LC_ALL to C if already set.
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
+lt_env=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+	  save_$lt_var=\$$lt_var
+	  lt_env=\"$lt_var=\$$lt_var \$lt_env\"
+	  $lt_var=C
+	  export $lt_var
+	fi"
+done
 
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
-  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
+if test -n "$lt_env"; then
+  lt_env="env $lt_env"
 fi
 
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
 fi
 
 # Global variables.
@@ -104,25 +148,328 @@
 show="$echo"
 show_help=
 execute_dlfiles=
+duplicate_deps=no
+preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+	$SED -n -e '1,100{
+		/ I /{
+			s,.*,import,
+			p
+			q
+			}
+		}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	case $arg in
+	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	    # Double-quote args containing other shell metacharacters.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    CC_quoted="$CC_quoted $arg"
+	  done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  extracted_serial=`expr $extracted_serial + 1`
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
 
 # Parse our command line options once, thoroughly.
-while test $# -gt 0
+while test "$#" -gt 0
 do
   arg="$1"
   shift
 
-  case "$arg" in
+  case $arg in
   -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
   *) optarg= ;;
   esac
 
   # If the previous option needs an argument, assign it.
   if test -n "$prev"; then
-    case "$prev" in
+    case $prev in
     execute_dlfiles)
-      eval "$prev=\"\$$prev \$arg\""
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+	$echo "$progname: invalid tag name: $tagname" 1>&2
+	exit $EXIT_FAILURE
+	;;
+      esac
+
+      case $tagname in
+      CC)
+	# Don't test for the "default" C tag, as we know, it's there, but
+	# not specially marked.
+	;;
+      *)
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+	  taglist="$taglist $tagname"
+	  # Evaluate the configuration.
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+	else
+	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+	fi
+	;;
+      esac
       ;;
     *)
       eval "$prev=\$arg"
@@ -135,24 +482,34 @@
   fi
 
   # Have we seen a non-optional argument yet?
-  case "$arg" in
+  case $arg in
   --help)
     show_help=yes
     ;;
 
   --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    exit 0
+    echo "\
+$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
+
+Copyright (C) 2008  Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
     ;;
 
   --config)
-    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
-    exit 0
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
     ;;
 
   --debug)
-    echo "$progname: enabling shell trace mode"
+    $echo "$progname: enabling shell trace mode"
     set -x
+    preserve_args="$preserve_args $arg"
     ;;
 
   --dry-run | -n)
@@ -160,18 +517,18 @@
     ;;
 
   --features)
-    echo "host: $host"
+    $echo "host: $host"
     if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
+      $echo "enable shared libraries"
     else
-      echo "disable shared libraries"
+      $echo "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
+      $echo "enable static libraries"
     else
-      echo "disable static libraries"
+      $echo "disable static libraries"
     fi
-    exit 0
+    exit $?
     ;;
 
   --finish) mode="finish" ;;
@@ -179,8 +536,23 @@
   --mode) prevopt="--mode" prev=mode ;;
   --mode=*) mode="$optarg" ;;
 
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
   --quiet | --silent)
     show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
     ;;
 
   -dlopen)
@@ -191,7 +563,7 @@
   -*)
     $echo "$modename: unrecognized option \`$arg'" 1>&2
     $echo "$help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
     ;;
 
   *)
@@ -204,19 +576,38 @@
 if test -n "$prevopt"; then
   $echo "$modename: option \`$prevopt' requires an argument" 1>&2
   $echo "$help" 1>&2
-  exit 1
+  exit $EXIT_FAILURE
 fi
 
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
 if test -z "$show_help"; then
 
   # Infer the operation mode.
   if test -z "$mode"; then
-    case "$nonopt" in
-    *cc | *++ | gcc* | *-gcc*)
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+    case $nonopt in
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
       mode=link
       for arg
       do
-	case "$arg" in
+	case $arg in
 	-c)
 	   mode=compile
 	   break
@@ -253,7 +644,7 @@
   if test -n "$execute_dlfiles" && test "$mode" != execute; then
     $echo "$modename: unrecognized option \`-dlopen'" 1>&2
     $echo "$help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
   fi
 
   # Change the help message to a mode-specific one.
@@ -261,140 +652,235 @@
   help="Try \`$modename --help --mode=$mode' for more information."
 
   # These modes are in order of execution frequency so that they run quickly.
-  case "$mode" in
+  case $mode in
   # libtool compile mode
   compile)
     modename="$modename: compile"
     # Get the compilation command and the source file.
     base_compile=
-    lastarg=
-    srcfile="$nonopt"
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
     suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
 
-    user_target=no
     for arg
     do
-      # Accept any command-line options.
-      case "$arg" in
-      -o)
-	if test "$user_target" != "no"; then
-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	  exit 1
-	fi
-	user_target=next
-	;;
-
-      -static)
-	build_old_libs=yes
-	continue
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
 	;;
-      esac
 
-      case "$user_target" in
-      next)
-	# The next one is the -o target name
-	user_target=yes
-	continue
-	;;
-      yes)
-	# We got the output file
-	user_target=set
+      target )
 	libobj="$arg"
+	arg_mode=normal
 	continue
 	;;
-      esac
 
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  if test -n "$libobj" ; then
+	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  arg_mode=target
+	  continue
+	  ;;
 
-      # Aesthetically quote the previous argument.
+	-static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+	    IFS="$save_ifs"
+
+	    # Double-quote args containing other shell metacharacters.
+	    # Many Bourne shells cannot handle close brackets correctly
+	    # in scan sets, so we specify it separately.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    lastarg="$lastarg $arg"
+	  done
+	  IFS="$save_ifs"
+	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	  # Add the arguments to base_compile.
+	  base_compile="$base_compile $lastarg"
+	  continue
+	  ;;
 
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
+	* )
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
       lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
 
+      case $lastarg in
       # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly in scan
-      # sets, so we specify it separately.
-      case "$lastarg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	lastarg="\"$lastarg\""
 	;;
       esac
 
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
+      base_compile="$base_compile $lastarg"
+    done # for arg
 
-    case "$user_target" in
-    set)
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
       ;;
-    no)
-      # Get the name of the library object.
-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
       ;;
     *)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSfmso]'
-    case "$libobj" in
+    xform='[cCFSifmso]'
+    case $libobj in
     *.ada) xform=ada ;;
     *.adb) xform=adb ;;
     *.ads) xform=ads ;;
     *.asm) xform=asm ;;
     *.c++) xform=c++ ;;
     *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
     *.cpp) xform=cpp ;;
     *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
+    *.[fF][09]?) xform=[fF][09]. ;;
     *.for) xform=for ;;
+    *.java) xform=java ;;
+    *.obj) xform=obj ;;
+    *.sx) xform=sx ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
 
-    case "$libobj" in
+    case $libobj in
     *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
     *)
       $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     esac
 
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
     if test -z "$base_compile"; then
       $echo "$modename: you must specify a compilation command" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
-      removelist="$obj $libobj"
+      removelist="$obj $lobj $libobj ${libobj}T"
     else
-      removelist="$libobj"
+      removelist="$lobj $libobj ${libobj}T"
     fi
 
     $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
       removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
+      output_obj=
       need_locks=no
       lockfile=
     fi
@@ -402,13 +888,13 @@
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until ln "$0" "$lockfile" 2>/dev/null; do
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
 	$show "Waiting for $lockfile to be removed"
 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
-	echo "\
+	$echo "\
 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
@@ -420,63 +906,72 @@
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
-      echo $srcfile > "$lockfile"
+      $echo "$srcfile" > "$lockfile"
     fi
 
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
-      # All platforms use -DPIC, to notify preprocessed assembler code.
-      command="$base_compile $srcfile $pic_flag -DPIC"
-      if test "$build_old_libs" = yes; then
-	lo_libobj="$libobj"
-	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$dir" = "X$libobj"; then
-	  dir="$objdir"
-	else
-	  dir="$dir/$objdir"
-	fi
-	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
 
-	if test -d "$dir"; then
-	  $show "$rm $libobj"
-	  $run $rm $libobj
-	else
-	  $show "$mkdir $dir"
-	  $run $mkdir $dir
-	  status=$?
-	  if test $status -ne 0 && test ! -d $dir; then
-	    exit $status
-	  fi
+      if test ! -d "${xdir}$objdir"; then
+	$show "$mkdir ${xdir}$objdir"
+	$run $mkdir ${xdir}$objdir
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
 	fi
       fi
-      if test "$compiler_o_lo" = yes; then
-	output_obj="$libobj"
-	command="$command -o $output_obj"
-      elif test "$compiler_c_o" = yes; then
-	output_obj="$obj"
-	command="$command -o $output_obj"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	command="$command -o $lobj"
       fi
 
-      $run $rm "$output_obj"
+      $run $rm "$lobj" "$output_obj"
+
       $show "$command"
-      if $run eval "$command"; then :
+      if $run eval $lt_env "$command"; then :
       else
 	test -n "$output_obj" && $run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -491,13 +986,13 @@
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
-      if test x"$output_obj" != x"$libobj"; then
-	$show "$mv $output_obj $libobj"
-	if $run $mv $output_obj $libobj; then :
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	$show "$mv $output_obj $lobj"
+	if $run $mv $output_obj $lobj; then :
 	else
 	  error=$?
 	  $run $rm $removelist
@@ -505,66 +1000,50 @@
 	fi
       fi
 
-      # If we have no pic_flag, then copy the object into place and finish.
-      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
-	# Rename the .lo from within objdir to obj
-	if test -f $obj; then
-	  $show $rm $obj
-	  $run $rm $obj
-	fi
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
 
-	$show "$mv $libobj $obj"
-	if $run $mv $libobj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+EOF
 
-	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$obj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
-	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	# Now arrange that obj and lo_libobj become the same file
-	$show "(cd $xdir && $LN_S $baseobj $libobj)"
-	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-	  exit 0
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
       fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
 
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
+EOF
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
-      command="$base_compile $srcfile"
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
       if test "$compiler_c_o" = yes; then
 	command="$command -o $obj"
-	output_obj="$obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $run $rm "$output_obj"
+      $run $rm "$obj" "$output_obj"
       $show "$command"
-      if $run eval "$command"; then :
+      if $run eval $lt_env "$command"; then :
       else
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -579,11 +1058,11 @@
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
-      if test x"$output_obj" != x"$obj"; then
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
 	$show "$mv $output_obj $obj"
 	if $run $mv $output_obj $obj; then :
 	else
@@ -593,40 +1072,42 @@
 	fi
       fi
 
-      # Create an invalid libtool object if no PIC, so that we do not
-      # accidentally link it into a program.
-      if test "$build_libtool_libs" != yes; then
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > \$libobj" || exit $?
-      else
-	# Move the .lo from within objdir
-	$show "$mv $libobj $lo_libobj"
-	if $run $mv $libobj $lo_libobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
     fi
 
+    $run $mv "${libobj}T" "${libobj}"
+
     # Unlock the critical section if it was locked
     if test "$need_locks" != no; then
-      $rm "$lockfile"
+      $run $rm "$lockfile"
     fi
 
-    exit 0
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool link mode
-  link)
+  link | relink)
     modename="$modename: link"
-    case "$host" in
-    *-*-cygwin* | *-*-mingw* | *-*-os2*)
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
-      # flag for every libtool invokation.
+      # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
@@ -635,179 +1116,13 @@
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
       allow_undefined=yes
-
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-      # This is a source program that is used to create import libraries
-      # on Windows for dlls which lack them. Don't remove nor modify the
-      # starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999 Free Software Foundation, Inc.
-# 
-#  This file is part of GNU libtool.
-# 
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-# 
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-# 
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-# 
-#  #include <stdio.h>		/* for printf() */
-#  #include <unistd.h>		/* for open(), lseek(), read() */
-#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-#  #include <string.h>		/* for strdup() */
-# 
-#  static unsigned int
-#  pe_get16 (fd, offset)
-#       int fd;
-#       int offset;
-#  {
-#    unsigned char b[2];
-#    lseek (fd, offset, SEEK_SET);
-#    read (fd, b, 2);
-#    return b[0] + (b[1]<<8);
-#  }
-# 
-#  static unsigned int
-#  pe_get32 (fd, offset)
-#      int fd;
-#      int offset;
-#  {
-#    unsigned char b[4];
-#    lseek (fd, offset, SEEK_SET);
-#    read (fd, b, 4);
-#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-#  }
-# 
-#  static unsigned int
-#  pe_as32 (ptr)
-#       void *ptr;
-#  {
-#    unsigned char *b = ptr;
-#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-#  }
-# 
-#  int
-#  main (argc, argv)
-#      int argc;
-#      char *argv[];
-#  {
-#      int dll;
-#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#      unsigned long export_rva, export_size, nsections, secptr, expptr;
-#      unsigned long name_rvas, nexp;
-#      unsigned char *expdata, *erva;
-#      char *filename, *dll_name;
-# 
-#      filename = argv[1];
-# 
-#      dll = open(filename, O_RDONLY|O_BINARY);
-#      if (!dll)
-#  	return 1;
-# 
-#      dll_name = filename;
-#    
-#      for (i=0; filename[i]; i++)
-#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-#  	    dll_name = filename + i +1;
-# 
-#      pe_header_offset = pe_get32 (dll, 0x3c);
-#      opthdr_ofs = pe_header_offset + 4 + 20;
-#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
-# 
-#      if (num_entries < 1) /* no exports */
-#  	return 1;
-# 
-#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#      export_size = pe_get32 (dll, opthdr_ofs + 100);
-#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#      secptr = (pe_header_offset + 4 + 20 +
-#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
-# 
-#      expptr = 0;
-#      for (i = 0; i < nsections; i++)
-#      {
-#  	char sname[8];
-#  	unsigned long secptr1 = secptr + 40 * i;
-#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-#  	lseek(dll, secptr1, SEEK_SET);
-#  	read(dll, sname, 8);
-#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-#  	{
-#  	    expptr = fptr + (export_rva - vaddr);
-#  	    if (export_rva + export_size > vaddr + vsize)
-#  		export_size = vsize - (export_rva - vaddr);
-#  	    break;
-#  	}
-#      }
-# 
-#      expdata = (unsigned char*)malloc(export_size);
-#      lseek (dll, expptr, SEEK_SET);
-#      read (dll, expdata, export_size);
-#      erva = expdata - export_rva;
-# 
-#      nexp = pe_as32 (expdata+24);
-#      name_rvas = pe_as32 (expdata+32);
-# 
-#      printf ("EXPORTS\n");
-#      for (i = 0; i<nexp; i++)
-#      {
-#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#      }
-# 
-#      return 0;
-#  }
-# /* impgen.c ends here */
       ;;
     *)
       allow_undefined=yes
       ;;
     esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt $@"
     compile_command="$nonopt"
     finalize_command="$nonopt"
 
@@ -818,18 +1133,13 @@
     convenience=
     old_convenience=
     deplibs=
-    linkopts=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
 
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      lib_search_path=
-    fi
-    # now prepend the system-specific ones
-    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-    
     avoid_version=no
     dlfiles=
     dlprefiles=
@@ -839,10 +1149,13 @@
     export_symbols_regex=
     generated=
     libobjs=
-    link_against_libtool_libs=
     ltlibs=
     module=no
+    no_install=no
     objs=
+    non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
+    precious_files_regex=
     prefer_static_libs=no
     preload=no
     prev=
@@ -854,27 +1167,41 @@
     temp_rpath=
     thread_safe=no
     vinfo=
+    vinfo_number=no
+    single_module="${wl}-single_module"
+
+    func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
     do
-      case "$arg" in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
+      case $arg in
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
-	else
+	  prefer_static_libs=yes
+	  ;;
+	-static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
-	fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
 	build_libtool_libs=no
 	build_old_libs=yes
-	prefer_static_libs=yes
 	break
 	;;
       esac
@@ -884,20 +1211,27 @@
     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
     # Go through the arguments, transforming them on the way.
-    while test $# -gt 0; do
+    while test "$#" -gt 0; do
       arg="$1"
       shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
 
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
-	case "$prev" in
+	case $prev in
 	output)
 	  compile_command="$compile_command @OUTPUT@"
 	  finalize_command="$finalize_command @OUTPUT@"
 	  ;;
 	esac
 
-	case "$prev" in
+	case $prev in
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
@@ -905,7 +1239,7 @@
 	    finalize_command="$finalize_command @SYMFILE@"
 	    preload=yes
 	  fi
-	  case "$arg" in
+	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
 	    if test "$dlself" = no; then
@@ -934,6 +1268,7 @@
 	      dlprefiles="$dlprefiles $arg"
 	    fi
 	    prev=
+	    continue
 	    ;;
 	  esac
 	  ;;
@@ -941,7 +1276,7 @@
 	  export_symbols="$arg"
 	  if test ! -f "$arg"; then
 	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  prev=
 	  continue
@@ -951,25 +1286,147 @@
 	  prev=
 	  continue
 	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
 	release)
 	  release="-$arg"
 	  prev=
 	  continue
 	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case "$arg" in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		# If there is no directory component, then add one.
+		case $arg in
+		*/* | *\\*) . $arg ;;
+		*) . ./$arg ;;
+		esac
+
+		if test -z "$pic_object" || \
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none && \
+		   test "$non_pic_object" = none; then
+		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+
+		# Extract subdirectory from the argument.
+		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		if test "X$xdir" = "X$arg"; then
+		  xdir=
+		else
+		  xdir="$xdir/"
+		fi
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  libobjs="$libobjs $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if test -z "$run"; then
+		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+		  exit $EXIT_FAILURE
+		else
+		  # Dry-run case.
+
+		  # Extract subdirectory from the argument.
+		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		  if test "X$xdir" = "X$arg"; then
+		    xdir=
+		  else
+		    xdir="$xdir/"
+		  fi
+
+		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+		  libobjs="$libobjs $pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
 	  else
 	    case "$xrpath " in
 	    *" $arg "*) ;;
@@ -979,17 +1436,52 @@
 	  prev=
 	  continue
 	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	shrext)
+  	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  prev=
+	  continue
+	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
 	  continue
 	  ;;
 	esac
-      fi
+      fi # test -n "$prev"
 
       prevarg="$arg"
 
-      case "$arg" in
+      case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then
 	  compile_command="$compile_command $link_static_flag"
@@ -1026,8 +1518,8 @@
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: not more than one -exported-symbols argument allowed"
-	  exit 1
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  exit $EXIT_FAILURE
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -1037,58 +1529,134 @@
 	continue
 	;;
 
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+
       -L*)
 	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
 	# We need an absolute path.
-	case "$dir" in
+	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`
 	  if test -z "$absdir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
 	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
 	  fi
 	  dir="$absdir"
 	  ;;
 	esac
-	case " $deplibs " in
-	*" $arg "*) ;;
-	*) deplibs="$deplibs $arg";;
-	esac
-	case " $lib_search_path " in
-	*" $dir "*) ;;
-	*) lib_search_path="$lib_search_path $dir";;
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
 	esac
-	case "$host" in
-	*-*-cygwin* | *-*-mingw* | *-*-os2*)
-	  dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-	  case ":$dllsearchpath:" in
-	  ::) dllsearchpath="$dllsearchdir";;
-	  *":$dllsearchdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
 	esac
+	continue
 	;;
 
       -l*)
-	if test "$arg" = "-lc"; then
-	  case "$host" in
-	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-	    # These systems don't actually have c library (as such)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
-	  esac
-	elif test "$arg" = "-lm"; then
-	  case "$host" in
-	  *-*-cygwin* | *-*-beos*)
-	    # These systems don't actually have math library (as such)
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    deplibs="$deplibs -framework System"
 	    continue
 	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
 	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
 	fi
 	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
 	;;
 
       -module)
@@ -1096,13 +1664,75 @@
 	continue
 	;;
 
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
       -no-undefined)
 	allow_undefined=no
 	continue
 	;;
 
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
       -o) prev=output ;;
 
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
       -release)
 	prev=release
 	continue
@@ -1121,11 +1751,11 @@
       -R*)
 	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
 	# We need an absolute path.
-	case "$dir" in
+	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1135,12 +1765,12 @@
 	continue
 	;;
 
-      -static)
-	# If we have no pic_flag, then this is the same as -all-static.
-	if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
 	continue
 	;;
 
@@ -1153,391 +1783,1349 @@
 	prev=vinfo
 	continue
 	;;
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
 
       # Some other compiler flag.
       -* | +*)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
 	  ;;
 	esac
 	;;
 
-      *.o | *.obj | *.a | *.lib)
+      *.$objext)
 	# A standard object.
 	objs="$objs $arg"
 	;;
 
       *.lo)
-	# A library object.
-	if test "$prev" = dlfiles; then
-	  dlfiles="$dlfiles $arg"
-	  if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
-	    prev=
-	    continue
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  # If there is no directory component, then add one.
+	  case $arg in
+	  */* | *\\*) . $arg ;;
+	  *) . ./$arg ;;
+	  esac
+
+	  if test -z "$pic_object" || \
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none && \
+	     test "$non_pic_object" = none; then
+	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$arg"; then
+	    xdir=
+ 	  else
+	    xdir="$xdir/"
+	  fi
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		dlfiles="$dlfiles $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    libobjs="$libobjs $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
 	  else
-	    # If libtool objects are unsupported, then we need to preload.
-	    prev=dlprefiles
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
 	  fi
-	fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if test -z "$run"; then
+	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+	    exit $EXIT_FAILURE
+	  else
+	    # Dry-run case.
 
-	if test "$prev" = dlprefiles; then
-	  # Preload the old-style object.
-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-	  prev=
+	    # Extract subdirectory from the argument.
+	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$arg"; then
+	      xdir=
+	    else
+	      xdir="$xdir/"
+	    fi
+
+	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	    libobjs="$libobjs $pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
 	fi
-	libobjs="$libobjs $arg"
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
 	;;
 
       *.la)
 	# A libtool-controlled library.
 
-	dlname=
-	libdir=
-	library_names=
-	old_library=
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d "$output_objdir"; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  esac
+	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		  library_names=
+		  old_library=
+		  case $lib in
+		  */* | *\\*) . $lib ;;
+		  *) . ./$lib ;;
+		  esac
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+		    test "X$ladir" = "X$lib" && ladir="."
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+	        ;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
+	      $echo
+	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+	      $echo "*** I have the capability to make that library automatically link in when"
+	      $echo "*** you link to this library.  But I can only do this if you have a"
+	      $echo "*** shared version of the library, which you do not appear to have"
+	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+	      $echo "*** that it is just a static archive that I should not used here."
+	    else
+	      $echo
+	      $echo "*** Warning: Linking the shared library $output against the"
+	      $echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
 
 	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
-	  $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
-	  exit 1
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit $EXIT_FAILURE
 	fi
 
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
 	# If the library was installed with an old release of libtool,
-	# it will not redefine variable installed.
+	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
 
 	# Read the .la file
-	# If there is no directory component, then add one.
-	case "$arg" in
-	*/* | *\\*) . $arg ;;
-	*) . ./$arg ;;
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
 	esac
 
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit $EXIT_FAILURE
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+	        case "$tmp_libs " in
+	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	        esac
+              fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  continue
+	fi # $pass = conv
+
+
 	# Get the name of the library we link against.
 	linklib=
 	for l in $old_library $library_names; do
 	  linklib="$l"
 	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
+	fi # $installed = yes
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
 
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
-	  exit 1
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
 	fi
 
-	# Find the relevant object directory and library name.
-	name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
 
-	if test "X$installed" = Xyes; then
-	  dir="$libdir"
-	else
-	  dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$dir" = "X$arg"; then
-	    dir="$objdir"
-	  else
-	    dir="$dir/$objdir"
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
 	  fi
-	fi
 
-	if test -n "$dependency_libs"; then
-	  # Extract -R and -L from dependency_libs
-	  temp_deplibs=
+	  tmp_libs=
 	  for deplib in $dependency_libs; do
-	    case "$deplib" in
-	    -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-		 case " $rpath $xrpath " in
-		 *" $temp_xrpath "*) ;;
-		 *) xrpath="$xrpath $temp_xrpath";;
-		 esac;;
-	    -L*) case "$compile_command $temp_deplibs " in
-		 *" $deplib "*) ;;
-		 *) temp_deplibs="$temp_deplibs $deplib";;
-		 esac
-		 temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-		 case " $lib_search_path " in
-		 *" $temp_dir "*) ;;
-		 *) lib_search_path="$lib_search_path $temp_dir";;
-		 esac
-		 ;;
-	    *) temp_deplibs="$temp_deplibs $deplib";;
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
 	    esac
-	  done
-	  dependency_libs="$temp_deplibs"
-	fi
-
-	if test -z "$libdir"; then
-	  # It is a libtool convenience library, so add in its objects.
-	  convenience="$convenience $dir/$old_library"
-	  old_convenience="$old_convenience $dir/$old_library"
-	  deplibs="$deplibs$dependency_libs"
-	  compile_command="$compile_command $dir/$old_library$dependency_libs"
-	  finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
 	  continue
-	fi
+	fi # $linkmode = prog...
 
-	# This library was specified with -dlopen.
-	if test "$prev" = dlfiles; then
-	  dlfiles="$dlfiles $arg"
-	  if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking statically,
-	    # we need to preload.
-	    prev=dlprefiles
-	  else
-	    # We should not create a dependency on this library, but we
-	    # may need any libraries it requires.
-	    compile_command="$compile_command$dependency_libs"
-	    finalize_command="$finalize_command$dependency_libs"
-	    prev=
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+		 test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath " in
+	      *" $dir "*) ;;
+	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
 	    continue
 	  fi
 	fi
 
-	# The library was specified with -dlpreopen.
-	if test "$prev" = dlprefiles; then
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    dlprefiles="$dlprefiles $dir/$old_library"
-	  else
-	    dlprefiles="$dlprefiles $dir/$linklib"
-	  fi
-	  prev=
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
 	fi
-
 	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  link_against_libtool_libs="$link_against_libtool_libs $arg"
-	  if test -n "$shlibpath_var"; then
-	    # Make sure the rpath contains only unique directories.
-	    case "$temp_rpath " in
-	    *" $dir "*) ;;
-	    *) temp_rpath="$temp_rpath $dir" ;;
-	    esac
-	  fi
-
-	  # We need an absolute path.
-	  case "$dir" in
-	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-	  *)
-	    absdir=`cd "$dir" && pwd`
-	    if test -z "$absdir"; then
-	      $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-	      $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	      absdir="$dir"
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=yes
+	  fi
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on
+	  # some systems (darwin)
+	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	    $echo
+	    if test "$linkmode" = prog; then
+	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $echo "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    ;;
-	  esac
-	  
-	  # This is the magic to use -rpath.
-	  # Skip directories that are in the system default run-time
-	  # search path, unless they have been requested with -R.
-	  case " $sys_lib_dlsearch_path " in
-	  *" $absdir "*) ;;
-	  *)
-	    case "$compile_rpath " in
+	    $echo "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
 	    *" $absdir "*) ;;
-	    *) compile_rpath="$compile_rpath $absdir" 
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
 	    esac
-	    ;;
-	  esac
-
-	  case " $sys_lib_dlsearch_path " in
-	  *" $libdir "*) ;;
-	  *)
-	    case "$finalize_rpath " in
+	    case " $sys_lib_dlsearch_path " in
 	    *" $libdir "*) ;;
-	    *) finalize_rpath="$finalize_rpath $libdir"
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
 	    esac
-	    ;;
-	  esac
+	  fi
 
-	  lib_linked=yes
-	  case "$hardcode_action" in
-	  immediate | unsupported)
-	    if test "$hardcode_direct" = no; then
-	      compile_command="$compile_command $dir/$linklib"
-	      deplibs="$deplibs $dir/$linklib"
-	      case "$host" in
-	      *-*-cygwin* | *-*-mingw* | *-*-os2*)
-		dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-		if test -n "$dllsearchpath"; then
-		  dllsearchpath="$dllsearchpath:$dllsearchdir"
-		else
-		  dllsearchpath="$dllsearchdir"
-		fi
-		;;
-	      esac
-	    elif test "$hardcode_minus_L" = no; then
-	      case "$host" in
-	      *-*-sunos*)
-		compile_shlibpath="$compile_shlibpath$dir:"
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw*)
+		major=`expr $current - $age`
+		versuffix="-$major"
 		;;
 	      esac
-	      case "$compile_command " in
-	      *" -L$dir "*) ;;
-	      *) compile_command="$compile_command -L$dir";;
-	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -L$dir -l$name"
-	    elif test "$hardcode_shlibpath_var" = no; then
-	      case ":$compile_shlibpath:" in
-	      *":$dir:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$dir:";;
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$extract_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$old_archive_from_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a module then we can not link against
+		    # it, someone is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
+		      $echo "** Warning, lib $linklib is a module, not a shared library"
+		      if test -z "$old_library" ; then
+		        $echo
+		        $echo "** And there doesn't seem to be a static archive available"
+		        $echo "** The link will probably fail, sorry"
+		      else
+		        add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit $EXIT_FAILURE
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
 	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -l$name"
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
-	      lib_linked=no
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
 	    fi
-	    ;;
+	  fi
 
-	  relink)
+	  if test "$linkmode" = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
 	    if test "$hardcode_direct" = yes; then
-	      compile_command="$compile_command $absdir/$linklib"
-	      deplibs="$deplibs $absdir/$linklib"
+	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
-	      case "$compile_command " in
-	      *" -L$absdir "*) ;;
-	      *) compile_command="$compile_command -L$absdir";;
-	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -L$absdir -l$name"
+	      add_dir="-L$libdir"
+	      add="-l$name"
 	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case ":$compile_shlibpath:" in
-	      *":$absdir:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$absdir:";;
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -l$name"
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	        add="$inst_prefix_dir$libdir/$linklib"
+	      else
+	        add="$libdir/$linklib"
+	      fi
 	    else
-	      lib_linked=no
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
 	    fi
-	    ;;
-
-	  *)
-	    lib_linked=no
-	    ;;
-	  esac
-
-	  if test "$lib_linked" != yes; then
-	    $echo "$modename: configuration error: unsupported hardcode properties"
-	    exit 1
-	  fi
 
-	  # Finalize command for both is simple: just hardcode it.
-	  if test "$hardcode_direct" = yes; then
-	    finalize_command="$finalize_command $libdir/$linklib"
-	  elif test "$hardcode_minus_L" = yes; then
-	    case "$finalize_command " in
-	    *" -L$libdir "*) ;;
-	    *) finalize_command="$finalize_command -L$libdir";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  elif test "$hardcode_shlibpath_var" = yes; then
-	    case ":$finalize_shlibpath:" in
-	    *":$libdir:"*) ;;
-	    *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  else
-	    # We cannot seem to hardcode it, guess we'll fake it.
-	    case "$finalize_command " in
-	    *" -L$dir "*) ;;
-	    *) finalize_command="$finalize_command -L$libdir";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  fi
-	else
-	  # Transform directly to old archives if we don't build new libraries.
-	  if test -n "$pic_flag" && test -z "$old_library"; then
-	    $echo "$modename: cannot find static library for \`$arg'" 1>&2
-	    exit 1
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
 	  fi
-
+	elif test "$linkmode" = prog; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
 	  if test "$hardcode_direct" != unsupported; then
 	    test -n "$old_library" && linklib="$old_library"
-	    compile_command="$compile_command $dir/$linklib"
-	    finalize_command="$finalize_command $dir/$linklib"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
-	    case "$compile_command " in
-	    *" -L$dir "*) ;;
-	    *) compile_command="$compile_command -L$dir";;
-	    esac
-	    compile_command="$compile_command -l$name"
-	    case "$finalize_command " in
-	    *" -L$dir "*) ;;
-	    *) finalize_command="$finalize_command -L$dir";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
-	fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    $echo
+	    $echo "*** Warning: This system can not link to static lib archive $lib."
+	    $echo "*** I have the capability to make that library automatically link in when"
+	    $echo "*** you link to this library.  But I can only do this if you have a"
+	    $echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      $echo "*** But as you try to build a module library, libtool will still create "
+	      $echo "*** a static module, that should work as long as the dlopening application"
+	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		$echo
+		$echo "*** However, this would only work if libtool was able to extract symbol"
+		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$echo "*** not find such a program.  So, this module is probably useless."
+		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
 
-	# Add in any libraries that this one depends upon.
-	compile_command="$compile_command$dependency_libs"
-	finalize_command="$finalize_command$dependency_libs"
-	continue
-	;;
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
 
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-      esac
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
 
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="$absdir/$objdir"
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit $EXIT_FAILURE
+		  fi
+		  #if test "$absdir" != "$libdir"; then
+		  #  $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  #fi
+		  path="$absdir"
+		fi
+		depdepl=
+		case $host in
+		*-*-darwin*)
+		  # we do not want to link against static libs,
+		  # but need to link against shared
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$deplibdir/$depdepl" ; then
+		      depdepl="$deplibdir/$depdepl"
+	      	    elif test -f "$path/$depdepl" ; then
+		      depdepl="$path/$depdepl"
+		    else
+		      # Can't find it, oh well...
+		      depdepl=
+		    fi
+		    # do not add paths which are already there
+		    case " $newlib_search_path " in
+		    *" $path "*) ;;
+		    *) newlib_search_path="$newlib_search_path $path";;
+		    esac
+		  fi
+		  path=""
+		  ;;
+		*)
+		  path="-L$path"
+		  ;;
+		esac
+		;;
+	      -l*)
+		case $host in
+		*-*-darwin*)
+		  # Again, we only want to link against shared libraries
+		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		  for tmp in $newlib_search_path ; do
+		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+		      break
+		    fi
+		  done
+		  path=""
+		  ;;
+		*) continue ;;
+		esac
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	      case " $deplibs " in
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
       fi
-    done
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    case "$output" in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-      ;;
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
 
-    *.a | *.lib)
-      if test -n "$link_against_libtool_libs"; then
-	$echo "$modename: error: cannot link libtool libraries into archives" 1>&2
-	exit 1
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
       fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  tmp_libs="$tmp_libs $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
 
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
+    case $linkmode in
+    oldlib)
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+      esac
 
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
@@ -1552,7 +3140,7 @@
       fi
 
       if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
       fi
 
       if test -n "$release"; then
@@ -1566,24 +3154,27 @@
       # Now set the variables for building old libraries.
       build_libtool_libs=no
       oldlibs="$output"
+      objs="$objs$old_deplibs"
       ;;
 
-    *.la)
+    lib)
       # Make sure we only generate libraries of the form `libNAME.la'.
-      case "$outputname" in
+      case $outputname in
       lib*)
 	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
 	if test "$module" = no; then
 	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
 	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
 	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
@@ -1591,30 +3182,24 @@
 	;;
       esac
 
-      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$output_objdir" = "X$output"; then
-	output_objdir="$objdir"
-      else
-	output_objdir="$output_objdir/$objdir"
-      fi
-
       if test -n "$objs"; then
-	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
-	exit 1
-      fi
-
-      # How the heck are we supposed to write a wrapper for a shared library?
-      if test -n "$link_against_libtool_libs"; then
-	 $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
-	 exit 1
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit $EXIT_FAILURE
+	else
+	  $echo
+	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  $echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
       fi
 
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
       fi
 
       set dummy $rpath
-      if test $# -gt 2; then
+      if test "$#" -gt 2; then
 	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
       fi
       install_libdir="$2"
@@ -1623,15 +3208,16 @@
       if test -z "$rpath"; then
 	if test "$build_libtool_libs" = yes; then
 	  # Building a libtool convenience library.
-	  libext=al
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
 	  build_libtool_libs=convenience
 	  build_old_libs=yes
 	fi
-	dependency_libs="$deplibs"
 
 	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
 	fi
 
 	if test -n "$release"; then
@@ -1640,73 +3226,143 @@
       else
 
 	# Parse the version information argument.
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0
 	IFS="$save_ifs"
 
 	if test -n "$8"; then
 	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
-	current="$2"
-	revision="$3"
-	age="$4"
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$2"
+	  number_minor="$3"
+	  number_revision="$4"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  darwin|linux|osf|windows|none)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$2"
+	  revision="$3"
+	  age="$4"
+	  ;;
+	esac
 
 	# Check that each of the things are valid numbers.
-	case "$current" in
-	0 | [1-9] | [1-9][0-9]*) ;;
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
-	case "$revision" in
-	0 | [1-9] | [1-9][0-9]*) ;;
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
-	case "$age" in
-	0 | [1-9] | [1-9][0-9]*) ;;
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
-	if test $age -gt $current; then
+	if test "$age" -gt "$current"; then
 	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Calculate the version variables.
 	major=
 	versuffix=
 	verstring=
-	case "$version_type" in
+	case $version_type in
 	none) ;;
 
-	irix)
-	  major=`expr $current - $age + 1`
-	  versuffix="$major.$revision"
-	  verstring="sgi$major.$revision"
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    major=`expr $current - $age`
+	  else
+	    major=`expr $current - $age + 1`
+	  fi
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
-	  while test $loop != 0; do
+	  while test "$loop" -ne 0; do
 	    iface=`expr $revision - $loop`
 	    loop=`expr $loop - 1`
-	    verstring="sgi$major.$iface:$verstring"
+	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
 	  ;;
 
 	linux)
@@ -1715,13 +3371,13 @@
 	  ;;
 
 	osf)
-	  major=`expr $current - $age`
+	  major=.`expr $current - $age`
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
-	  while test $loop != 0; do
+	  while test "$loop" -ne 0; do
 	    iface=`expr $current - $loop`
 	    loop=`expr $loop - 1`
 	    verstring="$verstring:${iface}.0"
@@ -1736,34 +3392,33 @@
 	  versuffix=".$current.$revision"
 	  ;;
 
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
 	windows)
-	  # Like Linux, but with '-' rather than '.', since we only
-	  # want one extension on Windows 95.
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
 	  major=`expr $current - $age`
-	  versuffix="-$major-$age-$revision"
+	  versuffix="-$major"
 	  ;;
 
 	*)
 	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
+	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	# Clear the version info if we defaulted, and they specified a release.
 	if test -z "$vinfo" && test -n "$release"; then
 	  major=
-	  verstring="0.0"
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
 	  if test "$need_version" = no; then
 	    versuffix=
 	  else
@@ -1777,7 +3432,7 @@
 	  versuffix=
 	  verstring=""
 	fi
-	
+
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then
@@ -1789,33 +3444,32 @@
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi
-
-	dependency_libs="$deplibs"
-	case "$host" in
-	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-	  # these systems don't actually have a c library (as such)!
-	  ;;
-        *-*-rhapsody*)
-	  # rhapsody is a little odd...
-	  deplibs="$deplibs -framework System"
-	  ;;
-	*)
-	  # Add libc to deplibs on all other systems.
-	  deplibs="$deplibs -lc"
-	  ;;
-	esac
       fi
 
-      # Create the output directory, or remove our outputs if we need to.
-      if test -d $output_objdir; then
-	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
-      else
-	$show "$mkdir $output_objdir"
-	$run $mkdir $output_objdir
-	status=$?
-	if test $status -ne 0 && test ! -d $output_objdir; then
-	  exit $status
+      if test "$mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$echo "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	         then
+		   continue
+		 fi
+	       fi
+	       removelist="$removelist $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	if test -n "$removelist"; then
+	  $show "${rm}r $removelist"
+	  $run ${rm}r $removelist
 	fi
       fi
 
@@ -1827,7 +3481,79 @@
 	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+      #	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+      #	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
       if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+ 	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
 	# Transform deplibs into only deplibs that can be linked in shared.
 	name_save=$name
 	libname_save=$libname
@@ -1842,13 +3568,13 @@
 	major=""
 	newdeplibs=
 	droppeddeps=no
-	case "$deplibs_check_method" in
+	case $deplibs_check_method in
 	pass_all)
 	  # Don't check for shared/static.  Everything works.
 	  # This might be a little naive.  We might want to check
 	  # whether the library exists or not.  But this is on
 	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behaviour.
+	  # implementing what was already the behavior.
 	  newdeplibs=$deplibs
 	  ;;
 	test_compile)
@@ -1861,64 +3587,85 @@
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $CC -o conftest conftest.c $deplibs
-	  if test $? -eq 0 ; then
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		set dummy $deplib_matches
-		deplib_match=$2
-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		  newdeplibs="$newdeplibs $i"
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning: This library needs some functionality provided by $i."
-		  echo "*** I have the capability to make that library automatically link in when"
-		  echo "*** you link to this library.  But I can only do this if you have a"
-		  echo "*** shared version of the library, which you do not appear to have."
+              if test "$name" != "" && test "$name" != "0"; then
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    newdeplibs="$newdeplibs $i"
+		    i=""
+		    ;;
+		  esac
+	        fi
+		if test -n "$i" ; then
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    $echo
+		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+		    $echo "*** I have the capability to make that library automatically link in when"
+		    $echo "*** you link to this library.  But I can only do this if you have a"
+		    $echo "*** shared version of the library, which I believe you do not have"
+		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
 		fi
 	      else
 		newdeplibs="$newdeplibs $i"
 	      fi
 	    done
 	  else
-	    # Error occured in the first compile.  Let's try to salvage the situation:
-	    # Compile a seperate program for each library.
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	     # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" ; then
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$CC -o conftest conftest.c $i
-		# Did it work?
-		if test $? -eq 0 ; then
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    echo "*** Warning: This library needs some functionality provided by $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which you do not appear to have."
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      newdeplibs="$newdeplibs $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval \\$echo \"$libname_spec\"`
+		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		    set dummy $deplib_matches
+		    deplib_match=$2
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      newdeplibs="$newdeplibs $i"
+		    else
+		      droppeddeps=yes
+		      $echo
+		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+		      $echo "*** I have the capability to make that library automatically link in when"
+		      $echo "*** you link to this library.  But I can only do this if you have a"
+		      $echo "*** shared version of the library, which you do not appear to have"
+		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  echo
-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "***  make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
+		  $echo
+		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $echo "*** make it link in!  You will probably need to install it or some"
+		  $echo "*** library that it depends on before this library will be fully"
+		  $echo "*** functional.  Installing it before continuing would be even better."
 		fi
 	      else
 		newdeplibs="$newdeplibs $i"
@@ -1928,19 +3675,28 @@
 	  ;;
 	file_magic*)
 	  set dummy $deplibs_check_method
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
-	    if test "$name" != "" ; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path; do
-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		    for potent_lib in $potential_libs; do
+            if test "$name" != "" && test  "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
 		      if ls -lLd "$potent_lib" 2>/dev/null \
 			 | grep " -> " >/dev/null; then
-			continue 
+			continue
 		      fi
 		      # The statement above tries to avoid entering an
 		      # endless loop below, in case of cyclic links.
@@ -1949,28 +3705,88 @@
 		      # but so what?
 		      potlib="$potent_lib"
 		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-			case "$potliblink" in
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
 			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | sed 10q \
-			 | egrep "$file_magic_regex" > /dev/null; then
+			 | ${SED} 10q \
+			 | $EGREP "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
 		      fi
-		    done
-	      done
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval $echo \"$potent_lib\" 2>/dev/null \
+		        | ${SED} 10q \
+		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		      newdeplibs="$newdeplibs $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have."
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		fi
 	      fi
 	    else
 	      # Add a -L argument.
@@ -1980,16 +3796,23 @@
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
-	     grep . >/dev/null; then
-	    echo
+	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	    -e 's/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	    done
+	  fi
+	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+	    | grep . >/dev/null; then
+	    $echo
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $echo "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
+	    $echo "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
 	  fi
 	  ;;
@@ -2000,19 +3823,26 @@
 	libname=$libname_save
 	name=$name_save
 
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
+	    $echo
+	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $echo "*** a static module, that should work as long as the dlopening"
+	    $echo "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $echo
+	      $echo "*** However, this would only work if libtool was able to extract symbol"
+	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $echo "*** not find such a program.  So, this module is probably useless."
+	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -2022,23 +3852,130 @@
 	      build_libtool_libs=no
 	    fi
 	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
+	    $echo "*** The inter-library dependencies that have been dropped here will be"
+	    $echo "*** automatically added whenever a program is linked with this library"
+	    $echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      $echo
+	      $echo "*** Since this library must not contain undefined symbols,"
+	      $echo "*** because either the platform does not support them or"
+	      $echo "*** it was explicitly requested with -no-undefined,"
+	      $echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
 	  fi
 	fi
 	# Done checking deplibs!
 	deplibs=$newdeplibs
       fi
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
       dlname=
-      
+
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+	      case $archive_cmds in
+	      *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
+	      *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
+	      esac
+	    else
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    fi
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
 	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	realname="$2"
@@ -2049,30 +3986,17 @@
 	else
 	  soname="$realname"
 	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
 
 	lib="$output_objdir/$realname"
+	linknames=
 	for link
 	do
 	  linknames="$linknames $link"
 	done
 
-	# Ensure that we have .o objects for linkers which dislike .lo
-	# (e.g. aix) in case we are running --disable-static
-	for obj in $libobjs; do
-	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$obj"; then
-	    xdir="."
-	  else
-	    xdir="$xdir"
-	  fi
-	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	  if test ! -f $xdir/$oldobj; then
-	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-	  fi
-	done
-
 	# Use standard objects if they are pic
 	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
@@ -2082,17 +4006,29 @@
 	    $show "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
 	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd" || exit $?
+	      eval cmd=\"$cmd\"
+	      if len=`expr "X$cmd" : ".*"` &&
+	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	        $show "$cmd"
+	        $run eval "$cmd" || exit $?
+	        skipped_export=false
+	      else
+	        # The command line is too long to execute in one step.
+	        $show "using reloadable object file for export list..."
+	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
 	    done
 	    IFS="$save_ifs"
 	    if test -n "$export_symbols_regex"; then
-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
 	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
 	    fi
@@ -2103,65 +4039,212 @@
 	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
 	fi
 
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+		case " $convenience " in
+		*" $test_deplib "*) ;;
+		*)
+			tmp_deplibs="$tmp_deplibs $test_deplib"
+			;;
+		esac
+	done
+	deplibs="$tmp_deplibs"
+
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "mkdir $gentop"
-	    $run mkdir "$gentop"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
 	    generated="$generated $gentop"
 
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case "$xlib" in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "mkdir $xdir"
-	      $run mkdir "$xdir"
-	      status=$?
-	      if test $status -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	    done
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
 	  fi
 	fi
-
+	
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
-	  linkopts="$linkopts $flag"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
 	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
+	  eval test_cmds=\"$archive_expsym_cmds\"
+	  cmds=$archive_expsym_cmds
+	else
+	  eval test_cmds=\"$archive_cmds\"
+	  cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
 	else
-	  eval cmds=\"$archive_cmds\"
+	  # The command line is too long to link in one step, link piecewise.
+	  $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  delfiles=
+	  last_robj=
+	  k=1
+	  output=$output_objdir/$output_la-${k}.$objext
+	  # Loop over the list of objects to be linked.
+	  for obj in $save_libobjs
+	  do
+	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+	    if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+		 test "$len" -le "$max_cmd_len"; }; then
+	      objlist="$objlist $obj"
+	    else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+	      if test "$k" -eq 1 ; then
+		# The first file doesn't have a previous command to add.
+		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+	      else
+		# All subsequent reloadable object files will link in
+		# the last one created.
+		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      fi
+	      last_robj=$output_objdir/$output_la-${k}.$objext
+	      k=`expr $k + 1`
+	      output=$output_objdir/$output_la-${k}.$objext
+	      objlist=$obj
+	      len=1
+	    fi
+	  done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  if ${skipped_export-false}; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    libobjs=$output
+	    # Append the command to create the export file.
+	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+	  # Set up a command to remove the reloadable object files
+	  # after they are used.
+	  i=0
+	  while test "$i" -lt "$k"
+	  do
+	    i=`expr $i + 1`
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+	  done
+
+	  $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $concat_cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    cmds=$archive_expsym_cmds
+	  else
+	    cmds=$archive_cmds
+	    fi
+	  fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+	  eval cmds=\"\$cmds~\$rm $delfiles\"
 	fi
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
 	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
 	done
 	IFS="$save_ifs"
 
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
 	# Create links to the real library.
 	for linkname in $linknames; do
 	  if test "$realname" != "$linkname"; then
@@ -2178,15 +4261,11 @@
       fi
       ;;
 
-    *.lo | *.o | *.obj)
-      if test -n "$link_against_libtool_libs"; then
-	$echo "$modename: error: cannot link libtool libraries into objects" 1>&2
-	exit 1
-      fi
-
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
+    obj)
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+      esac
 
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
@@ -2208,11 +4287,11 @@
 	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
       fi
 
-      case "$output" in
+      case $output in
       *.lo)
-	if test -n "$objs"; then
+	if test -n "$objs$old_deplibs"; then
 	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	libobj="$output"
 	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
@@ -2233,57 +4312,32 @@
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl= 
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "mkdir $gentop"
-	  $run mkdir "$gentop"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
 	  generated="$generated $gentop"
 
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case "$xlib" in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "mkdir $xdir"
-	    $run mkdir "$xdir"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	  done
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
       # Create the old-style object.
-      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
-      eval cmds=\"$reload_cmds\"
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      cmds=$reload_cmds
+      save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
 	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
       done
@@ -2296,7 +4350,7 @@
 	  $run ${rm}r $gentop
 	fi
 
-	exit 0
+	exit $EXIT_SUCCESS
       fi
 
       if test "$build_libtool_libs" != yes; then
@@ -2307,37 +4361,24 @@
 
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > $libobj" || exit $?
-	exit 0
+	# $show "echo timestamp > $libobj"
+	# $run eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
       fi
 
-      if test -n "$pic_flag"; then
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	eval cmds=\"$reload_cmds\"
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	cmds=$reload_cmds
+	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
 	  $show "$cmd"
 	  $run eval "$cmd" || exit $?
 	done
 	IFS="$save_ifs"
-      else
-	# Just create a symlink.
-	$show $rm $libobj
-	$run $rm $libobj
-	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$libobj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
-	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
       fi
 
       if test -n "$gentop"; then
@@ -2345,11 +4386,13 @@
 	$run ${rm}r $gentop
       fi
 
-      exit 0
+      exit $EXIT_SUCCESS
       ;;
 
-    # Anything else should be a program.
-    *)
+    prog)
+      case $host in
+	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
       if test -n "$vinfo"; then
 	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
       fi
@@ -2359,20 +4402,66 @@
       fi
 
       if test "$preload" = yes; then
-	if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
 	   test "$dlopen_self_static" = unknown; then
 	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi 
+	fi
       fi
-    
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	;;
+      esac
+
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
       if test -n "$rpath$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	for libdir in $rpath $xrpath; do
 	  # This is the magic to use -rpath.
-	  case "$compile_rpath " in
-	  *" $libdir "*) ;;
-	  *) compile_rpath="$compile_rpath $libdir" ;;
-	  esac
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
 	  *) finalize_rpath="$finalize_rpath $libdir" ;;
@@ -2390,7 +4479,7 @@
 	      hardcode_libdirs="$libdir"
 	    else
 	      # Just accumulate the unique libdirs.
-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
@@ -2408,6 +4497,19 @@
 	  *) perm_rpath="$perm_rpath $libdir" ;;
 	  esac
 	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
       done
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
@@ -2426,7 +4528,7 @@
 	      hardcode_libdirs="$libdir"
 	    else
 	      # Just accumulate the unique libdirs.
-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
@@ -2453,23 +4555,6 @@
       fi
       finalize_rpath="$rpath"
 
-      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$output_objdir" = "X$output"; then
-	output_objdir="$objdir"
-      else
-	output_objdir="$output_objdir/$objdir"
-      fi
-
-      # Create the binary in the object directory, then wrap it.
-      if test ! -d $output_objdir; then
-	$show "$mkdir $output_objdir"
-	$run $mkdir $output_objdir
-	status=$?
-	if test $status -ne 0 && test ! -d $output_objdir; then
-	  exit $status
-	fi
-      fi
-
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
 	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
@@ -2486,7 +4571,7 @@
       fi
 
       if test -n "$dlsyms"; then
-	case "$dlsyms" in
+	case $dlsyms in
 	"") ;;
 	*.c)
 	  # Discover the nlist of each of the dlfiles.
@@ -2518,38 +4603,50 @@
 	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
 
 	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	    for arg in $progfiles; do
 	      $show "extracting global C symbols from \`$arg'"
 	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
 	    done
 
 	    if test -n "$exclude_expsyms"; then
-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
 	      $run eval '$mv "$nlist"T "$nlist"'
 	    fi
-	    
+
 	    if test -n "$export_symbols_regex"; then
-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
 	      $run eval '$mv "$nlist"T "$nlist"'
 	    fi
 
 	    # Prepare the list of exported symbols
 	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
+	      export_symbols="$output_objdir/$outputname.exp"
 	      $run $rm $export_symbols
-	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    else
-	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    fi
 	  fi
 
 	  for arg in $dlprefiles; do
 	    $show "extracting global C symbols from \`$arg'"
-	    name=`echo "$arg" | sed -e 's%^.*/%%'`
-	    $run eval 'echo ": $name " >> "$nlist"'
+	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+	    $run eval '$echo ": $name " >> "$nlist"'
 	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
 	  done
 
@@ -2558,12 +4655,18 @@
 	    test -f "$nlist" || : > "$nlist"
 
 	    if test -n "$exclude_expsyms"; then
-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
 	      $mv "$nlist"T "$nlist"
 	    fi
 
 	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	    if grep -v "^: " < "$nlist" |
+		if sort -k 3 </dev/null >/dev/null 2>&1; then
+		  sort -k 3
+		else
+		  sort +2
+		fi |
+		uniq > "$nlist"S; then
 	      :
 	    else
 	      grep -v "^: " < "$nlist" > "$nlist"S
@@ -2572,7 +4675,7 @@
 	    if test -f "$nlist"S; then
 	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
 	    else
-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
 	    fi
 
 	    $echo >> "$output_objdir/$dlsyms" "\
@@ -2580,27 +4683,44 @@
 #undef lt_preloaded_symbols
 
 #if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
+# define lt_ptr void *
 #else
-# define lt_ptr_t char *
+# define lt_ptr char *
 # define const
 #endif
 
 /* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
 const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
   const char *name;
-  lt_ptr_t address;
+  lt_ptr address;
 }
 lt_preloaded_symbols[] =
 {\
 "
 
-	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
-		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
-		  < "$nlist" >> "$output_objdir/$dlsyms"
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
 
 	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr_t) 0}
+  {0, (lt_ptr) 0}
 };
 
 /* This works around a problem in FreeBSD linker */
@@ -2617,39 +4737,52 @@
 	  fi
 
 	  pic_flag_for_symtable=
-	  case "$host" in
+	  case $host in
 	  # compiling the symbol table file with pic_flag works around
 	  # a FreeBSD bug that causes programs to crash when -lm is
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    case "$compile_command " in
 	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
 	    esac;;
 	  *-*-hpux*)
 	    case "$compile_command " in
 	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+	    *) pic_flag_for_symtable=" $pic_flag";;
 	    esac
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
 	  # Clean up the generated files.
 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
 	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
 
 	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            else
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            ;;
+          esac
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
       else
@@ -2658,34 +4791,34 @@
 	# really was required.
 
 	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
       fi
 
-      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	$show "$link_command"
 	$run eval "$link_command"
-	status=$?
-	
+	exit_status=$?
+
 	# Delete the generated files.
 	if test -n "$dlsyms"; then
 	  $show "$rm $output_objdir/${outputname}S.${objext}"
 	  $run $rm "$output_objdir/${outputname}S.${objext}"
 	fi
 
-	exit $status
+	exit $exit_status
       fi
 
       if test -n "$shlibpath_var"; then
 	# We should set the shlibpath_var
 	rpath=
 	for dir in $temp_rpath; do
-	  case "$dir" in
+	  case $dir in
 	  [\\/]* | [A-Za-z]:[\\/]*)
 	    # Absolute path.
 	    rpath="$rpath$dir:"
@@ -2727,18 +4860,31 @@
 	fi
       fi
 
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
       if test "$hardcode_action" = relink; then
 	# Fast installation is not supported
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
-	
+
 	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
 	$echo "$modename: \`$output' will be relinked during installation" 1>&2
       else
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -2751,7 +4897,7 @@
 
       # Replace the output file specification.
       link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-      
+
       # Delete the old output files.
       $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
@@ -2763,14 +4909,26 @@
 
       # Quote the relink command for shipping.
       if test -n "$relink_command"; then
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
       fi
 
       # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case "$0" in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
 	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
@@ -2782,10 +4940,376 @@
 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in
-	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	  *) exeext= ;;
 	esac
-	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
+	case $host in
+	  *cygwin* | *mingw* )
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
+EOF
+
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
+EOF
+
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+              ;;
+            esac
+
+            cat >> $cwrappersource <<"EOF"
+  return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable(const char * path)
+{
+  struct stat st;
+
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
 
 	$echo > $output "\
 #! $SHELL
@@ -2801,19 +5325,33 @@
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
 # This environment variable determines our operation mode.
 if test \"\$libtool_install_magic\" = \"$magic\"; then
   # install mode needs the following variable:
-  link_against_libtool_libs='$link_against_libtool_libs'
+  notinst_deplibs='$notinst_deplibs'
 else
   # When we are sourced in execute mode, \$file and \$echo are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
@@ -2839,20 +5377,20 @@
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
     destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
       case \"\$destdir\" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
       *) thisdir=\"\$thisdir/\$destdir\" ;;
       esac
     fi
 
     file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
 
   # Try to get the absolute directory name.
@@ -2861,12 +5399,12 @@
 "
 
 	if test "$fast_install" = yes; then
-	  echo >> $output "\
-  program=lt-'$outputname'
+	  $echo >> $output "\
+  program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
-  
+
   if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
@@ -2877,14 +5415,15 @@
       $rm \"\$progdir/\$file\"
     fi"
 
-	  echo >> $output "\
+	  $echo >> $output "\
 
     # relink executable if necessary
     if test -n \"\$relink_command\"; then
-      if (cd \"\$thisdir\" && eval \$relink_command); then :
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
+	$echo \"\$relink_command_output\" >&2
 	$rm \"\$progdir/\$file\"
-	exit 1
+	exit $EXIT_FAILURE
       fi
     fi
 
@@ -2894,13 +5433,13 @@
     $rm \"\$progdir/\$file\"
   fi"
 	else
-	  echo >> $output "\
+	  $echo >> $output "\
   program='$outputname'
   progdir=\"\$thisdir/$objdir\"
 "
 	fi
 
-	echo >> $output "\
+	$echo >> $output "\
 
   if test -f \"\$progdir/\$program\"; then"
 
@@ -2931,47 +5470,35 @@
       # Run the actual program with our arguments.
 "
 	case $host in
-	  # win32 systems need to use the prog path for dll
-	  # lookup to work
-	*-*-cygwin*)
-	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
-"
-	  ;;
-
 	# Backslashes separate directories on plain windows
 	*-*-mingw | *-*-os2*)
 	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
 	  ;;
 
 	*)
 	  $echo >> $output "\
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
 	  ;;
 	esac
 	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
+      \$echo \"\$0: cannot exec \$program \$*\"
+      exit $EXIT_FAILURE
     fi
   else
     # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
   fi
 fi\
 "
 	chmod +x $output
       fi
-      exit 0
+      exit $EXIT_SUCCESS
       ;;
     esac
 
@@ -2987,74 +5514,130 @@
 	  oldobjs="$libobjs_save"
 	  build_libtool_libs=no
 	else
-	  oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	  oldobjs="$old_deplibs $non_pic_objects"
 	fi
 	addlibs="$old_convenience"
       fi
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "mkdir $gentop"
-	$run mkdir "$gentop"
-	status=$?
-	if test $status -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
 	generated="$generated $gentop"
-	  
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case "$xlib" in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "mkdir $xdir"
-	  $run mkdir "$xdir"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
 
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
+       cmds=$old_archive_from_new_cmds
       else
-	# Ensure that we have .o objects in place in case we decided
-	# not to build a shared library, and have fallen back to building
-	# static libs even though --disable-static was passed!
-	for oldobj in $oldobjs; do
-	  if test ! -f $oldobj; then
-	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$oldobj"; then
-	      xdir="."
-	    else
-	      xdir="$xdir"
-	    fi
-	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "copying selected object files to avoid basename conflicts..."
+
+	  if test -z "$gentop"; then
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
+	    fi
 	  fi
-	done
+
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		counter=`expr $counter + 1`
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      $run ln "$obj" "$gentop/$newobj" ||
+	      $run cp "$obj" "$gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
+	  done
+	fi
 
 	eval cmds=\"$old_archive_cmds\"
+
+	if len=`expr "X$cmds" : ".*"` &&
+	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  for obj in $save_oldobjs
+	  do
+	    oldobjs="$objlist $obj"
+	    objlist="$objlist $obj"
+	    eval test_cmds=\"$old_archive_cmds\"
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	       test "$len" -le "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+	        RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
       fi
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
+        eval cmd=\"$cmd\"
 	IFS="$save_ifs"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
@@ -3068,20 +5651,31 @@
     fi
 
     # Now create the libtool archive.
-    case "$output" in
+    case $output in
     *.la)
       old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"
       $show "creating $output"
 
-      if test -n "$xrpath"; then
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	done
-	dependency_libs="$temp_xrpath $dependency_libs"
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
       fi
 
+
       # Only create the output if not a dry run.
       if test -z "$run"; then
 	for installed in no yes; do
@@ -3090,8 +5684,71 @@
 	      break
 	    fi
 	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
 	  fi
 	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
 	  $echo > $output "\
 # $outputname - a libtool library file
 # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
@@ -3100,7 +5757,7 @@
 # It is necessary for linking the library.
 
 # The name that we can dlopen(3).
-dlname='$dlname'
+dlname='$tdlname'
 
 # Names of this library.
 library_names='$library_names'
@@ -3119,19 +5776,29 @@
 # Is this an already installed library?
 installed=$installed
 
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
 # Directory that this library needs to be installed in:
-libdir='$install_libdir'\
-"
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
 	done
       fi
 
       # Do a symbolic link so that the libtool archive can be found in
       # LD_LIBRARY_PATH before the program is installed.
       $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
       ;;
     esac
-    exit 0
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool install mode
@@ -3140,11 +5807,13 @@
 
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | grep shtool > /dev/null; then
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -3153,14 +5822,14 @@
       shift
     else
       install_prog=
-      arg="$nonopt"
+      arg=$nonopt
     fi
 
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case "$arg" in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
       arg="\"$arg\""
       ;;
     esac
@@ -3178,28 +5847,31 @@
     do
       if test -n "$dest"; then
 	files="$files $dest"
-	dest="$arg"
+	dest=$arg
 	continue
       fi
 
-      case "$arg" in
+      case $arg in
       -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
       -s)
 	stripme=" -s"
 	continue
 	;;
-      -*) ;;
-
+      -*)
+	;;
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
 	  prev=
 	else
-	  dest="$arg"
+	  dest=$arg
 	  continue
 	fi
 	;;
@@ -3207,8 +5879,8 @@
 
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -3218,13 +5890,13 @@
     if test -z "$install_prog"; then
       $echo "$modename: you must specify an install program" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test -n "$prev"; then
       $echo "$modename: the \`$prev' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test -z "$files"; then
@@ -3234,7 +5906,7 @@
 	$echo "$modename: you must specify a destination" 1>&2
       fi
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Strip any trailing slash from the destination.
@@ -3252,22 +5924,22 @@
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files
-      if test $# -gt 2; then
+      if test "$#" -gt 2; then
 	$echo "$modename: \`$dest' is not a directory" 1>&2
 	$echo "$help" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
       fi
     fi
-    case "$destdir" in
+    case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
     *)
       for file in $files; do
-	case "$file" in
+	case $file in
 	*.lo) ;;
 	*)
 	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
       done
@@ -3284,25 +5956,26 @@
     for file in $files; do
 
       # Do each installation.
-      case "$file" in
-      *.a | *.lib)
+      case $file in
+      *.$libext)
 	# Do the static libraries later.
 	staticlibs="$staticlibs $file"
 	;;
 
       *.la)
 	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	library_names=
 	old_library=
+	relink_command=
 	# If there is no directory component, then add one.
-	case "$file" in
+	case $file in
 	*/* | *\\*) . $file ;;
 	*) . ./$file ;;
 	esac
@@ -3321,10 +5994,41 @@
 	  esac
 	fi
 
-	dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
 	test "X$dir" = "X$file/" && dir=
 	dir="$dir$objdir"
 
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  if test "$inst_prefix_dir" = "$destdir"; then
+	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+	  else
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+	  fi
+
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	fi
+
 	# See the names of the shared library.
 	set dummy $library_names
 	if test -n "$2"; then
@@ -3332,29 +6036,49 @@
 	  shift
 	  shift
 
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
 	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$realname $destdir/$realname"
-	  $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
 
-	  if test $# -gt 0; then
+	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
 	    for linkname
 	    do
 	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
 	      fi
 	    done
 	  fi
 
 	  # Do each command in the postinstall commands.
 	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
-	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  cmds=$postinstall_cmds
+	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
 	  done
 	  IFS="$save_ifs"
 	fi
@@ -3381,18 +6105,18 @@
 	fi
 
 	# Deduce the name of the destination old-style object file.
-	case "$destfile" in
+	case $destfile in
 	*.lo)
 	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
 	  ;;
-	*.o | *.obj)
+	*.$objext)
 	  staticdest="$destfile"
 	  destfile=
 	  ;;
 	*)
 	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
@@ -3410,7 +6134,7 @@
 	  $show "$install_prog $staticobj $staticdest"
 	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
 	fi
-	exit 0
+	exit $EXIT_SUCCESS
 	;;
 
       *)
@@ -3422,55 +6146,87 @@
 	  destfile="$destdir/$destfile"
 	fi
 
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      file=`$echo $file|${SED} 's,.exe$,,'`
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
 	# Do a test to see if this is really a libtool program.
-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  link_against_libtool_libs=
+	case $host in
+	*cygwin*|*mingw*)
+	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+	  notinst_deplibs=
 	  relink_command=
 
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case "$file" in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  # Check the variables that should have been set.
-	  if test -z "$link_against_libtool_libs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-	    exit 1
+	  if test -z "$notinst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+	    exit $EXIT_FAILURE
 	  fi
 
 	  finalize=yes
-	  for lib in $link_against_libtool_libs; do
+	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      # If there is no directory component, then add one.
-	      case "$lib" in
+	      case $lib in
 	      */* | *\\*) . $lib ;;
 	      *) . ./$lib ;;
 	      esac
 	    fi
-	    libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
 	      finalize=no
 	    fi
 	  done
 
+	  relink_command=
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-	      else
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
+	      tmpdir=`func_mktempdir`
+	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
 
 	      $show "$relink_command"
 	      if $run eval "$relink_command"; then :
@@ -3485,10 +6241,27 @@
 	    fi
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway 
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
 	$show "$install_prog$stripme $file $destfile"
 	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
 	test -n "$outputname" && ${rm}r "$tmpdir"
@@ -3505,11 +6278,17 @@
       $show "$install_prog $file $oldlib"
       $run eval "$install_prog \$file \$oldlib" || exit $?
 
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
       # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      cmds=$old_postinstall_cmds
+      save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
 	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
       done
@@ -3523,11 +6302,10 @@
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec $SHELL $0 --finish$current_libdirs
-      exit 1
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
     fi
-
-    exit 0
     ;;
 
   # libtool finish mode
@@ -3545,10 +6323,11 @@
       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
-	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  cmds=$finish_cmds
+	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
 	    $run eval "$cmd" || admincmds="$admincmds
        $cmd"
@@ -3565,43 +6344,43 @@
     fi
 
     # Exit here if they wanted silent mode.
-    test "$show" = : && exit 0
+    test "$show" = : && exit $EXIT_SUCCESS
 
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    $echo "Libraries have been installed in:"
     for libdir in $libdirs; do
-      echo "   $libdir"
+      $echo "   $libdir"
     done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
     fi
     if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
     fi
     if test -n "$hardcode_libdir_flag_spec"; then
       libdir=LIBDIR
       eval flag=\"$hardcode_libdir_flag_spec\"
 
-      echo "   - use the \`$flag' linker flag"
+      $echo "   - use the \`$flag' linker flag"
     fi
     if test -n "$admincmds"; then
-      echo "   - have your system administrator run these commands:$admincmds"
+      $echo "   - have your system administrator run these commands:$admincmds"
     fi
     if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
     fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "----------------------------------------------------------------------"
-    exit 0
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool execute mode
@@ -3613,7 +6392,7 @@
     if test -z "$cmd"; then
       $echo "$modename: you must specify a COMMAND" 1>&2
       $echo "$help"
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Handle -dlopen flags immediately.
@@ -3621,18 +6400,18 @@
       if test ! -f "$file"; then
 	$echo "$modename: \`$file' is not a file" 1>&2
 	$echo "$help" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       dir=
-      case "$file" in
+      case $file in
       *.la)
 	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Read the libtool library.
@@ -3640,7 +6419,7 @@
 	library_names=
 
 	# If there is no directory component, then add one.
-	case "$file" in
+	case $file in
 	*/* | *\\*) . $file ;;
 	*) . ./$file ;;
 	esac
@@ -3658,8 +6437,10 @@
 	if test -f "$dir/$objdir/$dlname"; then
 	  dir="$dir/$objdir"
 	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
+	  if test ! -f "$dir/$dlname"; then
+	    $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
 	fi
 	;;
 
@@ -3695,13 +6476,13 @@
     args=
     for file
     do
-      case "$file" in
+      case $file in
       -*) ;;
       *)
 	# Do a test to see if this is really a libtool program.
-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 	  # If there is no directory component, then add one.
-	  case "$file" in
+	  case $file in
 	  */* | *\\*) . $file ;;
 	  *) . ./$file ;;
 	  esac
@@ -3718,43 +6499,47 @@
 
     if test -z "$run"; then
       if test -n "$shlibpath_var"; then
-        # Export the shlibpath_var.
-        eval "export $shlibpath_var"
-      fi
-
-      # Restore saved enviroment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
       fi
 
-      # Now actually exec the command.
-      eval "exec \$cmd$args"
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+		$lt_var=\$save_$lt_var; export $lt_var
+	      fi"
+      done
 
-      $echo "$modename: cannot exec \$cmd$args"
-      exit 1
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
     else
       # Display what would be done.
       if test -n "$shlibpath_var"; then
-        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-        $echo "export $shlibpath_var"
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
       fi
       $echo "$cmd$args"
-      exit 0
+      exit $EXIT_SUCCESS
     fi
     ;;
 
-  # libtool uninstall mode
-  uninstall)
-    modename="$modename: uninstall"
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
     rm="$nonopt"
     files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
 
     for arg
     do
-      case "$arg" in
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
       -*) rm="$rm $arg" ;;
       *) files="$files $arg" ;;
       esac
@@ -3763,91 +6548,192 @@
     if test -z "$rm"; then
       $echo "$modename: you must specify an RM program" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
+    rmdirs=
+
+    origobjdir="$objdir"
     for file in $files; do
       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$dir" = "X$file" && dir=.
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$origobjdir"
+      else
+	objdir="$dir/$origobjdir"
+      fi
       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test "$mode" = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+	|| (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
 
       rmfiles="$file"
 
-      case "$name" in
+      case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 	  . $dir/$name
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
-	    rmfiles="$rmfiles $dir/$n"
+	    rmfiles="$rmfiles $objdir/$n"
 	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
 
-	  $show "$rm $rmfiles"
-	  $run $rm $rmfiles
-
-	  if test -n "$library_names"; then
-	    # Do each command in the postuninstall commands.
-	    eval cmds=\"$postuninstall_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      cmds=$postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
 	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd"
-	    done
-	    IFS="$save_ifs"
-	  fi
+	    fi
 
-	  if test -n "$old_library"; then
-	    # Do each command in the old_postuninstall commands.
-	    eval cmds=\"$old_postuninstall_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      cmds=$old_postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
 	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd"
-	    done
-	    IFS="$save_ifs"
-	  fi
-
-	  # FIXME: should reinstall the best remaining shared library.
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
 	fi
 	;;
 
       *.lo)
-	if test "$build_old_libs" = yes; then
-	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-	  rmfiles="$rmfiles $dir/$oldobj"
+	# Possibly a libtool object, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+	  # Read the .lo file
+	  . $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" \
+	     && test "$pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" \
+	     && test "$non_pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$non_pic_object"
+	  fi
 	fi
-	$show "$rm $rmfiles"
-	$run $rm $rmfiles
 	;;
 
       *)
-	$show "$rm $rmfiles"
-	$run $rm $rmfiles
+	if test "$mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    file=`$echo $file|${SED} 's,.exe$,,'`
+	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    rmfiles="$rmfiles $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	    relink_command=
+	    . $dir/$noexename
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      rmfiles="$rmfiles $objdir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
 	;;
       esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
     done
-    exit 0
+    objdir="$origobjdir"
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
     ;;
 
   "")
     $echo "$modename: you must specify a MODE" 1>&2
     $echo "$generic_help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
     ;;
   esac
 
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$generic_help" 1>&2
-  exit 1
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+  fi
 fi # test -z "$show_help"
 
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit $EXIT_FAILURE
+fi
+
 # We need to display help for each of the modes.
-case "$mode" in
+case $mode in
 "") $echo \
 "Usage: $modename [OPTION]... [MODE-ARG]...
 
@@ -3862,10 +6748,12 @@
     --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
     --quiet           same as \`--silent'
     --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
     --version         print version information
 
 MODE must be one of the following:
 
+      clean           remove files from the build directory
       compile         compile a source file into a libtool object
       execute         automatically set library path, then run a program
       finish          complete the installation of libtool libraries
@@ -3874,8 +6762,24 @@
       uninstall       remove libraries from an installed directory
 
 MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+  exit $EXIT_SUCCESS
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
   ;;
 
 compile)
@@ -3887,6 +6791,8 @@
 This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
   -static           always build a \`.o' file suitable for static linking
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
@@ -3960,20 +6866,27 @@
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
+                    try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
+                    try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
+                    specify library version info [each variable defaults to 0]
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -4009,14 +6922,33 @@
 *)
   $echo "$modename: invalid operation mode \`$mode'" 1>&2
   $echo "$help" 1>&2
-  exit 1
+  exit $EXIT_FAILURE
   ;;
 esac
 
-echo
+$echo
 $echo "Try \`$modename --help' for more information about other modes."
 
-exit 0
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+disable_libs=shared
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+disable_libs=static
+# ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
diff -uNr tclreadline-2.1.0.orig/aux/missing tclreadline-2.1.0-1rsk/aux/missing
--- tclreadline-2.1.0.orig/aux/missing	2000-03-11 03:25:38.000000000 -0600
+++ tclreadline-2.1.0-1rsk/aux/missing	2011-07-06 10:01:49.000000000 -0500
@@ -1,7 +1,11 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -15,15 +19,49 @@
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
   echo 1>&2 "Try \`$0 --help' for more information"
   exit 1
 fi
 
-case "$1" in
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -35,21 +73,29 @@
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing - GNU libit 0.0"
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -58,10 +104,45 @@
     exit 1
     ;;
 
-  aclocal)
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+  aclocal*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`configure.in'.  You might want
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."
     touch aclocal.m4
@@ -69,8 +150,8 @@
 
   autoconf)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`configure.in'.  You might want to install the
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."
     touch configure
@@ -78,15 +159,15 @@
 
   autoheader)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`configure.in'.  You might want
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -95,10 +176,10 @@
     touch $touch_files
     ;;
 
-  automake)
+  automake*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
     find . -type f -name Makefile.am -print |
@@ -106,81 +187,170 @@
 	   while read f; do touch "$f"; done
     ;;
 
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
   bison|yacc)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
   lex|flex)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
   makeinfo)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
   *)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
+         it often tells you about the needed prerequisites for installing
          this package.  You may also peek at any GNU archive site, in case
          some other package would contain this missing \`$1' program."
     exit 1
@@ -188,3 +358,10 @@
 esac
 
 exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -uNr tclreadline-2.1.0.orig/aux/mkinstalldirs tclreadline-2.1.0-1rsk/aux/mkinstalldirs
--- tclreadline-2.1.0.orig/aux/mkinstalldirs	2000-03-11 03:25:38.000000000 -0600
+++ tclreadline-2.1.0-1rsk/aux/mkinstalldirs	2011-07-06 10:01:49.000000000 -0500
@@ -1,40 +1,161 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
 
-# $Id: mkinstalldirs,v 1.13 1999/01/05 03:18:55 bje Exp $
+scriptversion=2006-05-11.19
 
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+IFS=" ""	$nl"
 errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage"
+      exit $?
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --version)
+      echo "$0 $scriptversion"
+      exit $?
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
 
 for file
 do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error.  This is a problem when calling mkinstalldirs
+# from a parallel make.  We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+  '')
+    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    else
+      # On NextStep and OpenStep, the `mkdir' command does not
+      # recognize any option.  It will interpret all options as
+      # directories to create, and then abort because `.' already
+      # exists.
+      test -d ./-p && rmdir ./-p
+      test -d ./--version && rmdir ./--version
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+       test ! -d ./--version; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    else
+      # Clean up after NextStep and OpenStep mkdir.
+      for d in ./-m ./-p ./--version "./$dirmode";
+      do
+        test -d $d && rmdir $d
+      done
+    fi
+    ;;
+esac
 
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
+for file
+do
+  case $file in
+    /*) pathcomp=/ ;;
+    *)  pathcomp= ;;
+  esac
+  oIFS=$IFS
+  IFS=/
+  set fnord $file
+  shift
+  IFS=$oIFS
+
+  for d
+  do
+    test "x$d" = x && continue
+
+    pathcomp=$pathcomp$d
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+	errstatus=$lasterr
+      else
+	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+	  lasterr=
+	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	  if test ! -z "$lasterr"; then
+	    errstatus=$lasterr
+	  fi
+	fi
+      fi
+    fi
 
-     pathcomp="$pathcomp/"
-   done
+    pathcomp=$pathcomp/
+  done
 done
 
 exit $errstatus
 
-# mkinstalldirs ends here
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -uNr tclreadline-2.1.0.orig/config.h.in tclreadline-2.1.0-1rsk/config.h.in
--- tclreadline-2.1.0.orig/config.h.in	2000-07-01 17:18:08.000000000 -0500
+++ tclreadline-2.1.0-1rsk/config.h.in	2011-07-06 10:01:47.000000000 -0500
@@ -1,29 +1,70 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+/* config.h.in.  Generated from configure.in by autoheader.  */
 
-/* Define to empty if the keyword does not work.  */
-#undef const
+/* Define if rl_cleanup_after_signal is resolved in libreadline. */
+#undef CLEANUP_AFER_SIGNAL
 
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
+/* Define if _rl_executing_macro is resolved in libreadline. */
+#undef EXECUTING_MACRO_HACK
 
-/* Define if you have the <string.h> header file.  */
-#undef HAVE_STRING_H
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
 
-/* Define if you have the readline library (-lreadline).  */
+/* Define to 1 if you have the `readline' library (-lreadline). */
 #undef HAVE_LIBREADLINE
 
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
 /* Name of package */
 #undef PACKAGE
 
-/* Version number of package */
-#undef VERSION
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
 
-/*  Define if we have libreadline.  */
+/* Define if we have libreadline. */
 #undef READLINE_LIBRARY
 
-/*  Define if _rl_executing_macro is resolved in libreadline.  */
-#undef EXECUTING_MACRO_HACK
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
 
-/*  Define if rl_cleanup_after_signal is resolved in libreadline.  */
-#undef CLEANUP_AFER_SIGNAL
+/* Version number of package */
+#undef VERSION
 
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
diff -uNr tclreadline-2.1.0.orig/configure tclreadline-2.1.0-1rsk/configure
--- tclreadline-2.1.0.orig/configure	2000-12-07 18:48:06.000000000 -0600
+++ tclreadline-2.1.0-1rsk/configure	2011-07-06 10:01:42.000000000 -0500
@@ -1,52 +1,963 @@
 #! /bin/sh
-
+# From configure.in Revision: 2.26 .
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+# Generated by GNU Autoconf 2.63.
 #
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+
+  if test $as_have_required = yes &&	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  case $as_dir in
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
+tagnames=${tagnames+${tagnames},}CXX
+
+tagnames=${tagnames+${tagnames},}F77
 
-# Defaults:
-ac_help=
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
 ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-tcl=DIR          where to look for tclConfig.sh"
-ac_help="$ac_help
-  --with-tcl-includes=DIR where to look for tcl.h"
-ac_help="$ac_help
-  --with-tlib-library=DIR
-		  lib spec to tlib (e.g. '-L/usr/local/lib -lncurses')"
-ac_help="$ac_help
-  --with-readline-includes=DIR readline include files in DIR"
-ac_help="$ac_help
-  --with-readline-library=DIR
-		  lib spec to readline (e.g. '-L/usr/local/lib -lreadline')"
-ac_help="$ac_help
-  --enable-tclshrl        build statically linked tclshrl"
-ac_help="$ac_help
-  --enable-wishrl         build statically linked wishrl"
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="tclreadline.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+READLINE_INCLUDE_DIR
+TCL_LIB_SPEC
+TCL_INCLUDE_DIR
+STATIC_WISHRL_FALSE
+STATIC_WISHRL_TRUE
+TK_LIB_SPEC
+STATIC_TCLSHRL_FALSE
+STATIC_TCLSHRL_TRUE
+TCLRL_DIR
+TCLRL_LIBDIR
+LIBTOOL_DEPS
+LIBTOOL
+ac_ct_F77
+FFLAGS
+F77
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+CPP
+NMEDIT
+DSYMUTIL
+RANLIB
+AR
+ECHO
+LN_S
+EGREP
+GREP
+SED
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+PATCHLEVEL_STR
+VERSION
+PATCHLEVEL
+MINOR
+MAJOR
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+enable_fast_install
+with_gnu_ld
+enable_libtool_lock
+with_pic
+with_tags
+with_tcl
+with_tcl_includes
+with_tlib_library
+with_readline_includes
+with_readline_library
+enable_tclshrl
+enable_wishrl
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+CXX
+CXXFLAGS
+CCC
+CXXCPP
+F77
+FFLAGS'
+
 
 # Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
+cache_file=/dev/null
 exec_prefix=NONE
-host=NONE
 no_create=
-nonopt=NONE
 no_recursion=
 prefix=NONE
 program_prefix=NONE
@@ -55,94 +966,133 @@
 silent=
 site=
 srcdir=
-target=NONE
 verbose=
 x_includes=NONE
 x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
-
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case "$ac_option" in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
   -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
+    bindir=$ac_optarg ;;
 
   -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
+    ac_prev=build_alias ;;
   -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
+    build_alias=$ac_optarg ;;
 
   -cache-file | --cache-file | --cache-fil | --cache-fi \
   | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
     ac_prev=cache_file ;;
   -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
   | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -151,116 +1101,77 @@
   -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
   | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
   | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
+    exec_prefix=$ac_optarg ;;
 
   -gas | --gas | --ga | --g)
     # Obsolete; use --with-gas.
     with_gas=yes ;;
 
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
 
   -host | --host | --hos | --ho)
-    ac_prev=host ;;
+    ac_prev=host_alias ;;
   -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
 
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
   -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
   | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
+    includedir=$ac_optarg ;;
 
   -infodir | --infodir | --infodi | --infod | --info | --inf)
     ac_prev=infodir ;;
   -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
+    infodir=$ac_optarg ;;
 
   -libdir | --libdir | --libdi | --libd)
     ac_prev=libdir ;;
   -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
+    libdir=$ac_optarg ;;
 
   -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
   | --libexe | --libex | --libe)
     ac_prev=libexecdir ;;
   -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
   | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
 
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
     ac_prev=mandir ;;
   -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
+    mandir=$ac_optarg ;;
 
   -nfp | --nfp | --nf)
     # Obsolete; use --without-fp.
     with_fp=no ;;
 
   -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
+  | --no-cr | --no-c | -n)
     no_create=yes ;;
 
   -no-recursion | --no-recursion | --no-recursio | --no-recursi \
@@ -274,26 +1185,26 @@
   -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
   | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
   | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
+    oldincludedir=$ac_optarg ;;
 
   -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
     ac_prev=prefix ;;
   -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
+    prefix=$ac_optarg ;;
 
   -program-prefix | --program-prefix | --program-prefi | --program-pref \
   | --program-pre | --program-pr | --program-p)
     ac_prev=program_prefix ;;
   -program-prefix=* | --program-prefix=* | --program-prefi=* \
   | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
+    program_prefix=$ac_optarg ;;
 
   -program-suffix | --program-suffix | --program-suffi | --program-suff \
   | --program-suf | --program-su | --program-s)
     ac_prev=program_suffix ;;
   -program-suffix=* | --program-suffix=* | --program-suffi=* \
   | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
+    program_suffix=$ac_optarg ;;
 
   -program-transform-name | --program-transform-name \
   | --program-transform-nam | --program-transform-na \
@@ -310,7 +1221,17 @@
   | --program-transfo=* | --program-transf=* \
   | --program-trans=* | --program-tran=* \
   | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
 
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
@@ -320,7 +1241,7 @@
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
   | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
+    sbindir=$ac_optarg ;;
 
   -sharedstatedir | --sharedstatedir | --sharedstatedi \
   | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
@@ -331,58 +1252,69 @@
   | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
   | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
   | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
+    sharedstatedir=$ac_optarg ;;
 
   -site | --site | --sit)
     ac_prev=site ;;
   -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
+    site=$ac_optarg ;;
 
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
+    srcdir=$ac_optarg ;;
 
   -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
   | --syscon | --sysco | --sysc | --sys | --sy)
     ac_prev=sysconfdir ;;
   -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
   | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
+    sysconfdir=$ac_optarg ;;
 
   -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
+    ac_prev=target_alias ;;
   -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
+    target_alias=$ac_optarg ;;
 
   -v | -verbose | --verbose | --verbos | --verbo | --verb)
     verbose=yes ;;
 
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -393,183 +1325,768 @@
     ac_prev=x_includes ;;
   -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
   | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
+    x_includes=$ac_optarg ;;
 
   -x-libraries | --x-libraries | --x-librarie | --x-librari \
   | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
     ac_prev=x_libraries ;;
   -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
+    x_libraries=$ac_optarg ;;
 
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
     ;;
 
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
   *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
   esac
 done
 
 if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
 fi
 
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
 fi
-exec 5>./config.log
 
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
 done
 
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
 
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=tclreadline.c
 
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
 fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+if test -n "$ac_init_help"; then
+
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-tclshrl        build statically linked tclshrl
+  --enable-wishrl         build statically linked wishrl
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-pic              try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-tags[=TAGS]      include additional configurations [automatic]
+  --with-tcl=DIR          where to look for tclConfig.sh
+  --with-tcl-includes=DIR where to look for tcl.h
+  --with-tlib-library=DIR
+		  lib spec to tlib (e.g. '-L/usr/local/lib -lncurses')
+  --with-readline-includes=DIR readline include files in DIR
+  --with-readline-library=DIR
+		  lib spec to readline (e.g. '-L/usr/local/lib -lreadline')
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+  F77         Fortran 77 compiler command
+  FFLAGS      Fortran 77 compiler flags
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.63
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  $as_echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args '$ac_arg'"
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-for ac_site_file in $CONFIG_SITE; do
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
 done
 
 if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
 else
-  echo "creating cache $cache_file"
-  > $cache_file
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
 
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
 
 
 
 
 
 
-# From configure.in Revision: 2.26 
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+
 ac_aux_dir=
-for ac_dir in ./aux $srcdir/./aux; do
-  if test -f $ac_dir/install-sh; then
+for ac_dir in ./aux "$srcdir"/./aux; do
+  if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f $ac_dir/install.sh; then
+  elif test -f "$ac_dir/install.sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ./aux $srcdir/./aux" 1>&2; exit 1; }
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./aux \"$srcdir\"/./aux" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in ./aux \"$srcdir\"/./aux" >&2;}
+   { (exit 1); exit 1; }; }
 fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 
 MAJOR=2
@@ -584,6 +2101,8 @@
 
 
 
+am__api_version='1.10'
+
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -591,498 +2110,1372 @@
 # SunOS /usr/etc/install
 # IRIX /sbin/install
 # AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test "${ac_cv_path_install+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
 	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
+    done
+    ;;
+esac
+
+done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
+    INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
   fi
 fi
-echo "$ac_t""$INSTALL" 1>&6
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
-echo timestamp > conftestfile
+echo timestamp > conftest.file
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
+      set X `ls -t $srcdir/configure conftest.file`
    fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
 
       # If neither matched, then we have a broken ls.  This can happen
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
    fi
 
-   test "$2" = conftestfile
+   test "$2" = conftest.file
    )
 then
    # Ok.
    :
 else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+$as_echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
 fi
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+done
+IFS=$as_save_IFS
+
+fi
 
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
 
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  eval ac_cv_prog_make_${ac_make}_set=no
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
-rm -f conftestmake
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  echo "$ac_t""no" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
 
-PACKAGE=tclreadline
+# Define the identity of the package.
+ PACKAGE=tclreadline
+ VERSION=$PATCHLEVEL_STR
 
-VERSION=$PATCHLEVEL_STR
 
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
+cat >>confdefs.h <<_ACEOF
 #define PACKAGE "$PACKAGE"
-EOF
+_ACEOF
 
-cat >> confdefs.h <<EOF
+
+cat >>confdefs.h <<_ACEOF
 #define VERSION "$VERSION"
-EOF
+_ACEOF
 
+# Some tools Automake needs.
 
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
 
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:756: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:769: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:782: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:795: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:808: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
 
 
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
 
 
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:824: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
-  eval ac_cv_prog_make_${ac_make}_set=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 fi
-rm -f conftestmake
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
 else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:859: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:882: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+$as_echo "$as_me: error: invalid value of canonical build" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+$as_echo "$as_me: error: invalid value of canonical host" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 fi
 fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$ac_t""no" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
+  fi
+fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:912: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
   set dummy $ac_cv_prog_CC
   shift
-  if test $# -gt 0; then
+  if test $# != 0; then
     # We chose a different compiler from the bogus one.
     # However, it has the same basename, so the bogon will be chosen
     # first if we set CC to just the basename; use the full file name.
     shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
   fi
 fi
 fi
 fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$ac_t""no" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:963: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 fi
 fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$ac_t""no" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
- ;;
-    esac
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:995: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
 
-cat > conftest.$ac_ext << EOF
+fi
 
-#line 1006 "configure"
-#include "confdefs.h"
 
-main(){return(0);}
-EOF
-if { (eval echo configure:1011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
+  ac_file=''
 fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1037: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1042: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
+
+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+   { (exit 77); exit 77; }; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+    fi
+  fi
 fi
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
 fi
 
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+rm -f conftest$ac_cv_exeext
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
 
-if test $ac_cv_prog_gcc = yes; then
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_compiler_gnu=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_compiler_gnu=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
   GCC=yes
 else
   GCC=
 fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_g=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1070: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
 else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
-  ac_cv_prog_cc_g=no
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest*
 
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
+  CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
   if test "$GCC" = yes; then
     CFLAGS="-g -O2"
@@ -1096,241 +3489,592 @@
     CFLAGS=
   fi
 fi
+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
 
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1102: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_c89=$ac_arg
 else
-  cat > conftest.$ac_ext <<EOF
-#line 1107 "configure"
-#include "confdefs.h"
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-int main() {
 
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:1118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
 fi
 
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1135: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1140 "configure"
-#include "confdefs.h"
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
 
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:1147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
 fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
 
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
 
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1166: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+
+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
 fi
+
 fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
 
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
 
-# Check whether --enable-shared or --disable-shared was given.
+# Check whether --enable-shared was given.
 if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   enable_shared=yes
 fi
 
-# Check whether --enable-static or --disable-static was given.
+
+# Check whether --enable-static was given.
 if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   enable_static=yes
 fi
 
-# Check whether --enable-fast-install or --disable-fast-install was given.
+
+# Check whether --enable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${lt_cv_path_SED+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+
+fi
+
+SED=$lt_cv_path_SED
+
+{ $as_echo "$as_me:$LINENO: result: $SED" >&5
+$as_echo "$SED" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
 *)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
   done
-  IFS="$ac_save_ifs"
-  ;;
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
 else
-  enable_fast_install=yes
+  ac_cv_path_GREP=$GREP
 fi
 
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1266: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
 
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1286: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
   done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
 else
-  echo "$ac_t""no" 1>&6
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
 fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
 
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
+
+# Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
+if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1325: checking for ld used by GCC" >&5
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
+  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
     # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
+    [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -1344,149 +4088,416 @@
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1349: checking for GNU ld" >&5
+  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
 else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1352: checking for non-GNU ld" >&5
+  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
 fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test "${lt_cv_path_LD+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
 	test "$with_gnu_ld" != no && break
-      else
+	;;
+      *)
 	test "$with_gnu_ld" != yes && break
-      fi
+	;;
+      esac
     fi
   done
-  IFS="$ac_save_ifs"
+  IFS="$lt_save_ifs"
 else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
 fi
 fi
 
-LD="$ac_cv_path_LD"
+LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
+  { $as_echo "$as_me:$LINENO: result: $LD" >&5
+$as_echo "$LD" >&6; }
 else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1387: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
+test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
 fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
-
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1403: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+$as_echo_n "checking for BSD-compatible nm... " >&6; }
+if test "${lt_cv_path_NM+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
-  ac_cv_path_NM="$NM"
+  lt_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
       fi
-    fi
+    done
+    IFS="$lt_save_ifs"
   done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi
 fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+NM="$lt_cv_path_NM"
+
+{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-NM="$ac_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1439: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
 
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
+  enableval=$enable_libtool_lock;
 fi
 
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$lt_target" in
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1488 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1489: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
+  echo '#line 4481 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
       ;;
@@ -1497,6 +4508,60 @@
       LD="${LD-ld} -64"
       ;;
     esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_i386_fbsd"
+          ;;
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_x86_64_fbsd"
+          ;;
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
   fi
   rm -rf conftest*
   ;;
@@ -1505,194 +4570,15488 @@
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1510: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 1515 "configure"
-#include "confdefs.h"
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  lt_cv_cc_needs_belf=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	lt_cv_cc_needs_belf=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)
+        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  :
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  # Broken: success on invalid input.
+continue
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  :
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  # Broken: success on invalid input.
+continue
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_header_stdc=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_header_stdc=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then
+  :
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  eval "$as_ac_Header=yes"
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	eval "$as_ac_Header=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+fi
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
+$as_echo_n "checking $ac_header usability... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_header_compiler=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
+$as_echo_n "checking $ac_header presence... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  ac_header_preproc=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+fi
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CXX+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:$LINENO: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CXX" && break
+done
+
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
+
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_compiler_gnu=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_compiler_gnu=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cxx_g=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CXXFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cxx_g=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if test "${ac_cv_prog_CXXCPP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  :
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  # Broken: success on invalid input.
+continue
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  :
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  # Broken: success on invalid input.
+continue
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+fi
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_F77+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$F77"; then
+  ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+  { $as_echo "$as_me:$LINENO: result: $F77" >&5
+$as_echo "$F77" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$F77" && break
+  done
+fi
+if test -z "$F77"; then
+  ac_ct_F77=$F77
+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_F77"; then
+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_F77="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+$as_echo "$ac_ct_F77" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_F77" && break
+done
+
+  if test "x$ac_ct_F77" = x; then
+    F77=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    F77=$ac_ct_F77
+  fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_compiler_gnu=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_compiler_gnu=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+$as_echo_n "checking whether $F77 accepts -g... " >&6; }
+if test "${ac_cv_prog_f77_g+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  FFLAGS=-g
+cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_f77_g=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_prog_f77_g=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+$as_echo "$ac_cv_prog_f77_g" >&6; }
+if test "$ac_test_FFLAGS" = set; then
+  FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-g -O2"
+  else
+    FFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-O2"
+  else
+    FFLAGS=
+  fi
+fi
+
+if test $ac_compiler_gnu = yes; then
+  G77=yes
+else
+  G77=
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: none" >&5
+$as_echo "none" >&6; }
+fi
+
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux* | k*bsd*-gnu)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:$LINENO: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:$LINENO: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+
+    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+   # By default we will add the -single_module flag. You can override
+   # by either setting the environment variable LT_MULTI_MODULE
+   # non-empty at configure time, or by adding -multi_module to the
+   # link flags.
+   echo "int foo(void){return 1;}" > conftest.c
+   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+     -dynamiclib ${wl}-single_module conftest.c
+   if test -f libconftest.dylib; then
+     lt_cv_apple_cc_single_mod=yes
+     rm -rf libconftest.dylib*
+   fi
+   rm conftest.c
+      fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  lt_cv_ld_exported_symbols_list=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	lt_cv_ld_exported_symbols_list=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[0123])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*)
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+   10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+   10.[012]*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+   10.*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+
+enable_dlopen=no
+enable_win32_dll=no
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then
+  withval=$with_pic; pic_mode="$withval"
+else
+  pic_mode=default
+fi
+
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+
+
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7561: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:7565: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+  ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7851: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:7855: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $rm -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7955: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:7959: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  enable_shared_with_static_runtimes=no
+  archive_cmds=
+  archive_expsym_cmds=
+  old_archive_From_new_cmds=
+  old_archive_from_expsyms_cmds=
+  export_dynamic_flag_spec=
+  whole_archive_flag_spec=
+  thread_safe_flag_spec=
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_flag_spec_ld=
+  hardcode_libdir_separator=
+  hardcode_direct=no
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  link_all_deplibs=unknown
+  hardcode_automatic=no
+  module_cmds=
+  module_expsym_cmds=
+  always_export_symbols=no
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  :
+	  else
+  	  # We have old collect2
+  	  hardcode_direct=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L=yes
+  	  hardcode_libdir_flag_spec='-L$libdir'
+  	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc=no
+      hardcode_direct=no
+      hardcode_automatic=yes
+      hardcode_shlibpath_var=unsupported
+      whole_archive_flag_spec=''
+      link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	hardcode_direct=yes
+	export_dynamic_flag_spec='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld='+b $libdir'
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $rm conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         old_striplib="$STRIP -S"
+         { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+       else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+       ;;
+   *)
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_dl_dlopen=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+   ;;
+
+  *)
+    { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
+$as_echo_n "checking for shl_load... " >&6; }
+if test "${ac_cv_func_shl_load+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_shl_load || defined __stub___shl_load
+choke me
+#endif
+
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_func_shl_load=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_func_shl_load=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+$as_echo "$ac_cv_func_shl_load" >&6; }
+if test "x$ac_cv_func_shl_load" = x""yes; then
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_dld_shl_load=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
+$as_echo_n "checking for dlopen... " >&6; }
+if test "${ac_cv_func_dlopen+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_dlopen || defined __stub___dlopen
+choke me
+#endif
+
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_func_dlopen=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_func_dlopen=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+$as_echo "$ac_cv_func_dlopen" >&6; }
+if test "x$ac_cv_func_dlopen" = x""yes; then
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_dl_dlopen=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_svld_dlopen=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_svld_dlopen=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_dld_dld_link=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_dld_dld_link=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 10355 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 10455 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+# Report which library types will actually be built
+{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix[4-9]*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler \
+    CC \
+    LD \
+    lt_prog_compiler_wl \
+    lt_prog_compiler_pic \
+    lt_prog_compiler_static \
+    lt_prog_compiler_no_builtin_flag \
+    export_dynamic_flag_spec \
+    thread_safe_flag_spec \
+    whole_archive_flag_spec \
+    enable_shared_with_static_runtimes \
+    old_archive_cmds \
+    old_archive_from_new_cmds \
+    predep_objects \
+    postdep_objects \
+    predeps \
+    postdeps \
+    compiler_lib_search_path \
+    compiler_lib_search_dirs \
+    archive_cmds \
+    archive_expsym_cmds \
+    postinstall_cmds \
+    postuninstall_cmds \
+    old_archive_from_expsyms_cmds \
+    allow_undefined_flag \
+    no_undefined_flag \
+    export_symbols_cmds \
+    hardcode_libdir_flag_spec \
+    hardcode_libdir_flag_spec_ld \
+    hardcode_libdir_separator \
+    hardcode_automatic \
+    module_cmds \
+    module_expsym_cmds \
+    lt_cv_prog_compiler_c_o \
+    fix_srcfile_path \
+    exclude_expsyms \
+    include_expsyms; do
+
+    case $var in
+    old_archive_cmds | \
+    old_archive_from_new_cmds | \
+    archive_cmds | \
+    archive_expsym_cmds | \
+    module_cmds | \
+    module_expsym_cmds | \
+    old_archive_from_expsyms_cmds | \
+    export_symbols_cmds | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  { $as_echo "$as_me:$LINENO: creating $ofile" >&5
+$as_echo "$as_me: creating $ofile" >&6;}
+
+  cat <<__EOF__ >> "$cfgfile"
+#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+# Check whether --with-tags was given.
+if test "${with_tags+set}" = set; then
+  withval=$with_tags; tagnames="$withval"
+fi
+
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
+$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
+$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
+    else
+      { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
+$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
+    "") ;;
+    *)  { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
+$as_echo "$as_me: error: invalid tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
+$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+compiler_lib_search_dirs_CXX=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+compiler_CXX=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+else
+  lt_prog_compiler_no_builtin_flag_CXX=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:$LINENO: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_CXX=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+ld_shlibs_CXX=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  aix[4-9]*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+	;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    archive_cmds_CXX=''
+    hardcode_direct_CXX=yes
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  :
+	else
+	  # We have old collect2
+	  hardcode_direct_CXX=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_CXX=yes
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  hardcode_libdir_separator_CXX=
+	fi
+	;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    always_export_symbols_CXX=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag_CXX='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag_CXX="-z nodefs"
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+	# Determine the default libpath from the value encoded in an empty executable.
+	cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	no_undefined_flag_CXX=' ${wl}-bernotok'
+	allow_undefined_flag_CXX=' ${wl}-berok'
+	# Exported symbols can be pulled into shared objects from archives
+	whole_archive_flag_spec_CXX='$convenience'
+	archive_cmds_need_lc_CXX=yes
+	# This is similar to how AIX traditionally builds its shared libraries.
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag_CXX=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+    # as there is no search path for DLLs.
+    hardcode_libdir_flag_spec_CXX='-L$libdir'
+    allow_undefined_flag_CXX=unsupported
+    always_export_symbols_CXX=no
+    enable_shared_with_static_runtimes_CXX=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
+      allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+      if test "$GXX" = yes ; then
+      output_verbose_link_cmd='echo'
+      archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+      module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+      module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+        archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+        archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+      fi
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      ghcx*)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  freebsd[12]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    ld_shlibs_CXX=no
+    ;;
+  freebsd-elf*)
+    archive_cmds_need_lc_CXX=no
+    ;;
+  freebsd* | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    ld_shlibs_CXX=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    hardcode_direct_CXX=yes
+    hardcode_minus_L_CXX=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      ld_shlibs_CXX=no
+      ;;
+    aCC*)
+      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_CXX=:
+
+      case $host_cpu in
+      hppa*64*|ia64*) ;;
+      *)
+	export_dynamic_flag_spec_CXX='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      hardcode_direct_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      ;;
+    *)
+      hardcode_direct_CXX=yes
+      hardcode_minus_L_CXX=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case $host_cpu in
+	    hppa*64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    *)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  interix[3-9]*)
+    hardcode_direct_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+	# SGI C++
+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	  else
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	link_all_deplibs_CXX=yes
+	;;
+    esac
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    ;;
+  linux* | k*bsd*-gnu)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc*)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	archive_cmds_need_lc_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC* | pgcpp*)
+        # Portland Group C++ compiler
+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+	# Compaq C++
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C++ 5.9
+	  no_undefined_flag_CXX=' -zdefs'
+	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+
+	  # Not sure whether something based on
+	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	  # would be better.
+	  output_verbose_link_cmd='echo'
+
+	  # Archives containing C++ object files must be created using
+	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	  # necessary to make sure instantiated templates are included
+	  # in the archive.
+	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	  ;;
+	esac
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      hardcode_libdir_flag_spec_CXX='-R$libdir'
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    if test -f /usr/libexec/ld.so; then
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx*)
+	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx*)
+	allow_undefined_flag_CXX=' -expect_unresolved \*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      lcc*)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        archive_cmds_need_lc_CXX=yes
+	no_undefined_flag_CXX=' -zdefs'
+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-R$libdir'
+	hardcode_shlibpath_var_CXX=no
+	case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    # The compiler driver will combine and reorder linker options,
+	    # but understands `-z linker_flag'.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	    ;;
+	esac
+	link_all_deplibs_CXX=yes
+
+	output_verbose_link_cmd='echo'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx*)
+	# Green Hills C++ Compiler
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	  case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	  esac
+	fi
+	;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+    no_undefined_flag_CXX='${wl}-z,text'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    no_undefined_flag_CXX='${wl}-z,text'
+    allow_undefined_flag_CXX='${wl}-z,nodefs'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+GCC_CXX="$GXX"
+LD_CXX="$LD"
+
+cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$rm -f confest.$objext
+
+compiler_lib_search_dirs_CXX=
+if test -n "$compiler_lib_search_path_CXX"; then
+  compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+    #
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+
+lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_CXX=no
+  ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:12864: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:12868: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $rm -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:12968: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:12972: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+  ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $rm conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+        allow_undefined_flag_CXX=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_CXX=no
+        else
+	  archive_cmds_need_lc_CXX=yes
+        fi
+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
+$as_echo "$archive_cmds_need_lc_CXX" >&6; }
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" || \
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test "$hardcode_action_CXX" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_CXX \
+    CC_CXX \
+    LD_CXX \
+    lt_prog_compiler_wl_CXX \
+    lt_prog_compiler_pic_CXX \
+    lt_prog_compiler_static_CXX \
+    lt_prog_compiler_no_builtin_flag_CXX \
+    export_dynamic_flag_spec_CXX \
+    thread_safe_flag_spec_CXX \
+    whole_archive_flag_spec_CXX \
+    enable_shared_with_static_runtimes_CXX \
+    old_archive_cmds_CXX \
+    old_archive_from_new_cmds_CXX \
+    predep_objects_CXX \
+    postdep_objects_CXX \
+    predeps_CXX \
+    postdeps_CXX \
+    compiler_lib_search_path_CXX \
+    compiler_lib_search_dirs_CXX \
+    archive_cmds_CXX \
+    archive_expsym_cmds_CXX \
+    postinstall_cmds_CXX \
+    postuninstall_cmds_CXX \
+    old_archive_from_expsyms_cmds_CXX \
+    allow_undefined_flag_CXX \
+    no_undefined_flag_CXX \
+    export_symbols_cmds_CXX \
+    hardcode_libdir_flag_spec_CXX \
+    hardcode_libdir_flag_spec_ld_CXX \
+    hardcode_libdir_separator_CXX \
+    hardcode_automatic_CXX \
+    module_cmds_CXX \
+    module_expsym_cmds_CXX \
+    lt_cv_prog_compiler_c_o_CXX \
+    fix_srcfile_path_CXX \
+    exclude_expsyms_CXX \
+    include_expsyms_CXX; do
+
+    case $var in
+    old_archive_cmds_CXX | \
+    old_archive_from_new_cmds_CXX | \
+    archive_cmds_CXX | \
+    archive_expsym_cmds_CXX | \
+    module_cmds_CXX | \
+    module_expsym_cmds_CXX | \
+    old_archive_from_expsyms_cmds_CXX | \
+    export_symbols_cmds_CXX | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_CXX
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_CXX
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_CXX
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_CXX
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+archive_cmds_need_lc_F77=no
+allow_undefined_flag_F77=
+always_export_symbols_F77=no
+archive_expsym_cmds_F77=
+export_dynamic_flag_spec_F77=
+hardcode_direct_F77=no
+hardcode_libdir_flag_spec_F77=
+hardcode_libdir_flag_spec_ld_F77=
+hardcode_libdir_separator_F77=
+hardcode_minus_L_F77=no
+hardcode_automatic_F77=no
+module_cmds_F77=
+module_expsym_cmds_F77=
+link_all_deplibs_F77=unknown
+old_archive_cmds_F77=$old_archive_cmds
+no_undefined_flag_F77=
+whole_archive_flag_spec_F77=
+enable_shared_with_static_runtimes_F77=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+objext_F77=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="\
+      program t
+      end
+"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+compiler_F77=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix[4-9]*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+GCC_F77="$G77"
+LD_F77="$LD"
+
+lt_prog_compiler_wl_F77=
+lt_prog_compiler_pic_F77=
+lt_prog_compiler_static_F77=
+
+{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_F77='-Wl,'
+    lt_prog_compiler_static_F77='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_F77='-fno-common'
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_F77=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_F77=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_F77='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      else
+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-KPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_F77='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_F77='-non_shared'
+        ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_F77='-Qoption ld '
+      lt_prog_compiler_pic_F77='-PIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_F77='-Kconform_pic'
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_F77='-pic'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
+$as_echo "$lt_prog_compiler_pic_F77" >&6; }
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_F77"; then
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_F77=no
+  ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14551: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:14555: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
+    case $lt_prog_compiler_pic_F77 in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+     esac
+else
+    lt_prog_compiler_pic_F77=
+     lt_prog_compiler_can_build_shared_F77=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_F77=
+    ;;
+  *)
+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $rm -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14655: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:14659: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_F77=
+  enable_shared_with_static_runtimes_F77=no
+  archive_cmds_F77=
+  archive_expsym_cmds_F77=
+  old_archive_From_new_cmds_F77=
+  old_archive_from_expsyms_cmds_F77=
+  export_dynamic_flag_spec_F77=
+  whole_archive_flag_spec_F77=
+  thread_safe_flag_spec_F77=
+  hardcode_libdir_flag_spec_F77=
+  hardcode_libdir_flag_spec_ld_F77=
+  hardcode_libdir_separator_F77=
+  hardcode_direct_F77=no
+  hardcode_minus_L_F77=no
+  hardcode_shlibpath_var_F77=unsupported
+  link_all_deplibs_F77=unknown
+  hardcode_automatic_F77=no
+  module_cmds_F77=
+  module_expsym_cmds_F77=
+  always_export_symbols_F77=no
+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_F77=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_F77=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_F77=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_F77=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=no
+      enable_shared_with_static_runtimes_F77=yes
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=yes
+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_F77=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_F77=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_F77=''
+      hardcode_direct_F77=yes
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  :
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_F77=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_F77=yes
+  	  hardcode_libdir_flag_spec_F77='-L$libdir'
+  	  hardcode_libdir_separator_F77=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_F77=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_F77='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_F77="-z nodefs"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_F77=' ${wl}-bernotok'
+	  allow_undefined_flag_F77=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_F77='$convenience'
+	  archive_cmds_need_lc_F77=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_F77=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_F77=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_F77=' '
+      allow_undefined_flag_F77=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_F77='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_F77=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_F77=no
+      hardcode_direct_F77=no
+      hardcode_automatic_F77=yes
+      hardcode_shlibpath_var_F77=unsupported
+      whole_archive_flag_spec_F77=''
+      link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_F77=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_direct_F77=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	hardcode_direct_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+	  ;;
+	*)
+	  hardcode_direct_F77=yes
+	  export_dynamic_flag_spec_F77='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      link_all_deplibs_F77=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    newsos6)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_F77=yes
+	hardcode_shlibpath_var_F77=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_F77='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_F77='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      allow_undefined_flag_F77=unsupported
+      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_F77=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_shlibpath_var_F77=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_F77=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
+	  hardcode_direct_F77=no
+        ;;
+	motorola)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_F77=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_F77=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      ld_shlibs_F77=no
+      ;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
+$as_echo "$ld_shlibs_F77" >&6; }
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_F77" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_F77=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_F77 in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $rm conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_F77
+	pic_flag=$lt_prog_compiler_pic_F77
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
+        allow_undefined_flag_F77=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_F77=no
+        else
+	  archive_cmds_need_lc_F77=yes
+        fi
+        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
+$as_echo "$archive_cmds_need_lc_F77" >&6; }
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" || \
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_F77" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_F77=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_F77=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_F77=unsupported
+fi
+{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+$as_echo "$hardcode_action_F77" >&6; }
+
+if test "$hardcode_action_F77" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_F77 \
+    CC_F77 \
+    LD_F77 \
+    lt_prog_compiler_wl_F77 \
+    lt_prog_compiler_pic_F77 \
+    lt_prog_compiler_static_F77 \
+    lt_prog_compiler_no_builtin_flag_F77 \
+    export_dynamic_flag_spec_F77 \
+    thread_safe_flag_spec_F77 \
+    whole_archive_flag_spec_F77 \
+    enable_shared_with_static_runtimes_F77 \
+    old_archive_cmds_F77 \
+    old_archive_from_new_cmds_F77 \
+    predep_objects_F77 \
+    postdep_objects_F77 \
+    predeps_F77 \
+    postdeps_F77 \
+    compiler_lib_search_path_F77 \
+    compiler_lib_search_dirs_F77 \
+    archive_cmds_F77 \
+    archive_expsym_cmds_F77 \
+    postinstall_cmds_F77 \
+    postuninstall_cmds_F77 \
+    old_archive_from_expsyms_cmds_F77 \
+    allow_undefined_flag_F77 \
+    no_undefined_flag_F77 \
+    export_symbols_cmds_F77 \
+    hardcode_libdir_flag_spec_F77 \
+    hardcode_libdir_flag_spec_ld_F77 \
+    hardcode_libdir_separator_F77 \
+    hardcode_automatic_F77 \
+    module_cmds_F77 \
+    module_expsym_cmds_F77 \
+    lt_cv_prog_compiler_c_o_F77 \
+    fix_srcfile_path_F77 \
+    exclude_expsyms_F77 \
+    include_expsyms_F77; do
+
+    case $var in
+    old_archive_cmds_F77 | \
+    old_archive_from_new_cmds_F77 | \
+    archive_cmds_F77 | \
+    archive_expsym_cmds_F77 | \
+    module_cmds_F77 | \
+    module_expsym_cmds_F77 | \
+    old_archive_from_expsyms_cmds_F77 | \
+    export_symbols_cmds_F77 | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_F77
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_F77
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_F77
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_F77
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_F77
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_F77
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_F77
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_F77
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_F77
+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_F77
+module_expsym_cmds=$lt_module_expsym_cmds_F77
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_F77
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_F77
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_F77
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_F77
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_F77
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_F77
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_F77
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_F77
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_F77
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_F77
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_F77
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_F77
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_F77
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+objext_GCJ=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+compiler_GCJ=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+archive_cmds_need_lc_GCJ=no
+
+old_archive_cmds_GCJ=$old_archive_cmds
+
+
+lt_prog_compiler_no_builtin_flag_GCJ=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
+
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:16870: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:16874: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl_GCJ=
+lt_prog_compiler_pic_GCJ=
+lt_prog_compiler_static_GCJ=
+
+{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_GCJ='-Wl,'
+    lt_prog_compiler_static_GCJ='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_GCJ='-fno-common'
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_GCJ=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_GCJ=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_GCJ='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      else
+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-KPIC'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_GCJ='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_GCJ='-non_shared'
+        ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GCJ='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_GCJ='-Qoption ld '
+      lt_prog_compiler_pic_GCJ='-PIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_GCJ='-pic'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
+$as_echo "$lt_prog_compiler_pic_GCJ" >&6; }
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_GCJ"; then
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_GCJ=no
+  ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:17160: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:17164: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
+    case $lt_prog_compiler_pic_GCJ in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
+     esac
+else
+    lt_prog_compiler_pic_GCJ=
+     lt_prog_compiler_can_build_shared_GCJ=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_GCJ=
+    ;;
+  *)
+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_GCJ=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_GCJ=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_GCJ=yes
+     fi
+   fi
+   $rm -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GCJ=
+fi
+
+
+{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_GCJ=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:17264: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:17268: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GCJ=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_GCJ=
+  enable_shared_with_static_runtimes_GCJ=no
+  archive_cmds_GCJ=
+  archive_expsym_cmds_GCJ=
+  old_archive_From_new_cmds_GCJ=
+  old_archive_from_expsyms_cmds_GCJ=
+  export_dynamic_flag_spec_GCJ=
+  whole_archive_flag_spec_GCJ=
+  thread_safe_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_ld_GCJ=
+  hardcode_libdir_separator_GCJ=
+  hardcode_direct_GCJ=no
+  hardcode_minus_L_GCJ=no
+  hardcode_shlibpath_var_GCJ=unsupported
+  link_all_deplibs_GCJ=unknown
+  hardcode_automatic_GCJ=no
+  module_cmds_GCJ=
+  module_expsym_cmds_GCJ=
+  always_export_symbols_GCJ=no
+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_GCJ=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_GCJ=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_GCJ=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_GCJ=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_GCJ=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=no
+      enable_shared_with_static_runtimes_GCJ=yes
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GCJ=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_GCJ" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GCJ=
+      export_dynamic_flag_spec_GCJ=
+      whole_archive_flag_spec_GCJ=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=yes
+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_GCJ=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_GCJ=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_GCJ=''
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  :
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_GCJ=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_GCJ=yes
+  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
+  	  hardcode_libdir_separator_GCJ=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_GCJ=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_GCJ='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_GCJ="-z nodefs"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
+	  allow_undefined_flag_GCJ=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_GCJ='$convenience'
+	  archive_cmds_need_lc_GCJ=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_GCJ=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_GCJ=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ=' '
+      allow_undefined_flag_GCJ=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_GCJ='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_GCJ=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_GCJ=no
+      hardcode_direct_GCJ=no
+      hardcode_automatic_GCJ=yes
+      hardcode_shlibpath_var_GCJ=unsupported
+      whole_archive_flag_spec_GCJ=''
+      link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_GCJ=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_direct_GCJ=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	hardcode_direct_GCJ=yes
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GCJ=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
+	  ;;
+	*)
+	  hardcode_direct_GCJ=yes
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GCJ=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    newsos6)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_GCJ=yes
+	hardcode_shlibpath_var_GCJ=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      allow_undefined_flag_GCJ=unsupported
+      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_GCJ=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
+	  hardcode_direct_GCJ=no
+        ;;
+	motorola)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GCJ=no
+      export_dynamic_flag_spec_GCJ='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_GCJ=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_GCJ=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_GCJ='${wl}-z,text'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GCJ='${wl}-z,text'
+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      ld_shlibs_GCJ=no
+      ;;
+    esac
+  fi
+
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
+$as_echo "$ld_shlibs_GCJ" >&6; }
+test "$ld_shlibs_GCJ" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_GCJ" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_GCJ=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_GCJ in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $rm conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_GCJ
+	pic_flag=$lt_prog_compiler_pic_GCJ
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
+        allow_undefined_flag_GCJ=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_GCJ=no
+        else
+	  archive_cmds_need_lc_GCJ=yes
+        fi
+        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
+$as_echo "$archive_cmds_need_lc_GCJ" >&6; }
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_GCJ=
+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_GCJ" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
+     test "$hardcode_minus_L_GCJ" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GCJ=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GCJ=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GCJ=unsupported
+fi
+{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+$as_echo "$hardcode_action_GCJ" >&6; }
+
+if test "$hardcode_action_GCJ" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_GCJ \
+    CC_GCJ \
+    LD_GCJ \
+    lt_prog_compiler_wl_GCJ \
+    lt_prog_compiler_pic_GCJ \
+    lt_prog_compiler_static_GCJ \
+    lt_prog_compiler_no_builtin_flag_GCJ \
+    export_dynamic_flag_spec_GCJ \
+    thread_safe_flag_spec_GCJ \
+    whole_archive_flag_spec_GCJ \
+    enable_shared_with_static_runtimes_GCJ \
+    old_archive_cmds_GCJ \
+    old_archive_from_new_cmds_GCJ \
+    predep_objects_GCJ \
+    postdep_objects_GCJ \
+    predeps_GCJ \
+    postdeps_GCJ \
+    compiler_lib_search_path_GCJ \
+    compiler_lib_search_dirs_GCJ \
+    archive_cmds_GCJ \
+    archive_expsym_cmds_GCJ \
+    postinstall_cmds_GCJ \
+    postuninstall_cmds_GCJ \
+    old_archive_from_expsyms_cmds_GCJ \
+    allow_undefined_flag_GCJ \
+    no_undefined_flag_GCJ \
+    export_symbols_cmds_GCJ \
+    hardcode_libdir_flag_spec_GCJ \
+    hardcode_libdir_flag_spec_ld_GCJ \
+    hardcode_libdir_separator_GCJ \
+    hardcode_automatic_GCJ \
+    module_cmds_GCJ \
+    module_expsym_cmds_GCJ \
+    lt_cv_prog_compiler_c_o_GCJ \
+    fix_srcfile_path_GCJ \
+    exclude_expsyms_GCJ \
+    include_expsyms_GCJ; do
+
+    case $var in
+    old_archive_cmds_GCJ | \
+    old_archive_from_new_cmds_GCJ | \
+    archive_cmds_GCJ | \
+    archive_expsym_cmds_GCJ | \
+    module_cmds_GCJ | \
+    module_expsym_cmds_GCJ | \
+    old_archive_from_expsyms_cmds_GCJ | \
+    export_symbols_cmds_GCJ | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_GCJ
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_GCJ
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_GCJ
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_GCJ
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_GCJ
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_GCJ
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_GCJ
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_GCJ
+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_GCJ
+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_GCJ
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_GCJ
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_GCJ
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_GCJ
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_GCJ
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_GCJ
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_GCJ
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_GCJ
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_GCJ
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_GCJ
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_GCJ
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_RC \
+    CC_RC \
+    LD_RC \
+    lt_prog_compiler_wl_RC \
+    lt_prog_compiler_pic_RC \
+    lt_prog_compiler_static_RC \
+    lt_prog_compiler_no_builtin_flag_RC \
+    export_dynamic_flag_spec_RC \
+    thread_safe_flag_spec_RC \
+    whole_archive_flag_spec_RC \
+    enable_shared_with_static_runtimes_RC \
+    old_archive_cmds_RC \
+    old_archive_from_new_cmds_RC \
+    predep_objects_RC \
+    postdep_objects_RC \
+    predeps_RC \
+    postdeps_RC \
+    compiler_lib_search_path_RC \
+    compiler_lib_search_dirs_RC \
+    archive_cmds_RC \
+    archive_expsym_cmds_RC \
+    postinstall_cmds_RC \
+    postuninstall_cmds_RC \
+    old_archive_from_expsyms_cmds_RC \
+    allow_undefined_flag_RC \
+    no_undefined_flag_RC \
+    export_symbols_cmds_RC \
+    hardcode_libdir_flag_spec_RC \
+    hardcode_libdir_flag_spec_ld_RC \
+    hardcode_libdir_separator_RC \
+    hardcode_automatic_RC \
+    module_cmds_RC \
+    module_expsym_cmds_RC \
+    lt_cv_prog_compiler_c_o_RC \
+    fix_srcfile_path_RC \
+    exclude_expsyms_RC \
+    include_expsyms_RC; do
+
+    case $var in
+    old_archive_cmds_RC | \
+    old_archive_from_new_cmds_RC | \
+    archive_cmds_RC | \
+    archive_expsym_cmds_RC | \
+    module_cmds_RC | \
+    module_expsym_cmds_RC | \
+    old_archive_from_expsyms_cmds_RC | \
+    export_symbols_cmds_RC | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_RC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_RC
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_RC
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_RC
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
 
-int main() {
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
 
-; return 0; }
-EOF
-if { (eval echo configure:1522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-fi
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
 
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
 
-esac
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
 
 
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
 else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
   fi
 fi
-rm -f confcache
 
 
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	;;
+
+      *)
+	{ { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
+$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
 
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
+$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
+   { (exit 1); exit 1; }; }
+  fi
 fi
 
 
+
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
+# Prevent multiple expansion
+
+
+
+
+
 
 
 
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1626: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if test "${ac_cv_c_const+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 1631 "configure"
-#include "confdefs.h"
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-int main() {
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this.  */
+  typedef int charset[2];
+  const charset cs;
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this.  */
+    char *t;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
 
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x = {0,0};
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; };
+    struct s *b; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
 
-; return 0; }
-EOF
-if { (eval echo configure:1680: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_c_const=yes
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_c_const=no
 fi
 
-echo "$ac_t""$ac_cv_c_const" 1>&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
 if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
+
+cat >>confdefs.h <<\_ACEOF
+#define const /**/
+_ACEOF
 
 fi
 
@@ -1703,129 +20062,210 @@
 # SunOS /usr/etc/install
 # IRIX /sbin/install
 # AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1712: checking for a BSD compatible install" >&5
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test "${ac_cv_path_install+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
 	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
+    done
+    ;;
+esac
+
+done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
+    INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
   fi
 fi
-echo "$ac_t""$INSTALL" 1>&6
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1767: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 fi
 fi
-RANLIB="$ac_cv_prog_RANLIB"
+RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
+  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
 else
-  echo "$ac_t""no" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1795: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
 else
-  ac_cv_prog_LN_S=ln
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
 fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
+
+{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  echo "$ac_t""no" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
 fi
 
 
 
 # -- WHICH TCL TO USE
-# Check whether --with-tcl or --without-tcl was given.
+
+# Check whether --with-tcl was given.
 if test "${with_tcl+set}" = set; then
-  withval="$with_tcl"
-  tcl_search=$withval
+  withval=$with_tcl; tcl_search=$withval
 else
   tcl_search=""
 
 fi
 
 
-echo $ac_n "checking which tclConfig.sh to use""... $ac_c" 1>&6
-echo "configure:1829: checking which tclConfig.sh to use" >&5
+{ $as_echo "$as_me:$LINENO: checking which tclConfig.sh to use" >&5
+$as_echo_n "checking which tclConfig.sh to use... " >&6; }
 TCL_LIB_DIR=""
 for dir in $tcl_search /usr/lib /usr/local/lib $exec_prefix/lib /usr/local/lib/unix /opt/tcl/lib; do
     if test -r $dir/tclConfig.sh; then
@@ -1835,18 +20275,24 @@
 done
 
 if test -z "$TCL_LIB_DIR"; then
-    { echo "configure: error: Can't find Tcl libraries.  Use --with-tcl to specify the directory containing tclConfig.sh on your system." 1>&2; exit 1; }
+    { { $as_echo "$as_me:$LINENO: error: Can't find Tcl libraries.  Use --with-tcl to specify the directory containing tclConfig.sh on your system." >&5
+$as_echo "$as_me: error: Can't find Tcl libraries.  Use --with-tcl to specify the directory containing tclConfig.sh on your system." >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
 . $TCL_LIB_DIR/tclConfig.sh
-echo "$ac_t""$TCL_LIB_DIR/tclConfig.sh" 1>&6
-echo $ac_n "checking for your tcl version""... $ac_c" 1>&6
-echo "configure:1845: checking for your tcl version" >&5
-echo "$ac_t""$TCL_VERSION, patchlevel $TCL_PATCH_LEVEL" 1>&6
+{ $as_echo "$as_me:$LINENO: result: $TCL_LIB_DIR/tclConfig.sh" >&5
+$as_echo "$TCL_LIB_DIR/tclConfig.sh" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for your tcl version" >&5
+$as_echo_n "checking for your tcl version... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $TCL_VERSION, patchlevel $TCL_PATCH_LEVEL" >&5
+$as_echo "$TCL_VERSION, patchlevel $TCL_PATCH_LEVEL" >&6; }
 
 # Check, if tcl_version is > 8.0
 if test $TCL_MAJOR_VERSION -lt 8; then
-    { echo "configure: error: need tcl 8.0 or higher." 1>&2; exit 1; }
+    { { $as_echo "$as_me:$LINENO: error: need tcl 8.0 or higher." >&5
+$as_echo "$as_me: error: need tcl 8.0 or higher." >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
 
@@ -1866,126 +20312,73 @@
 
 
 # HEADERS
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1871: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 1886 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 1903 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1909: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 1920 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1951: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1956 "configure"
-#include "confdefs.h"
+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <stdlib.h>
 #include <stdarg.h>
 #include <string.h>
 #include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_header_stdc=yes
 else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_stdc=no
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_header_stdc=no
 fi
-rm -f conftest*
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1981 "configure"
-#include "confdefs.h"
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <string.h>
-EOF
+
+_ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
+  $EGREP "memchr" >/dev/null 2>&1; then
   :
 else
-  rm -rf conftest*
   ac_cv_header_stdc=no
 fi
 rm -f conftest*
@@ -1994,16 +20387,19 @@
 
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1999 "configure"
-#include "confdefs.h"
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <stdlib.h>
-EOF
+
+_ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
+  $EGREP "free" >/dev/null 2>&1; then
   :
 else
-  rm -rf conftest*
   ac_cv_header_stdc=no
 fi
 rm -f conftest*
@@ -2012,82 +20408,232 @@
 
 if test $ac_cv_header_stdc = yes; then
   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then
   :
 else
-  cat > conftest.$ac_ext <<EOF
-#line 2020 "configure"
-#include "confdefs.h"
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
 
-EOF
-if { (eval echo configure:2031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   :
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_header_stdc=no
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
 fi
-rm -fr conftest*
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
+
 fi
 fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
-  cat >> confdefs.h <<\EOF
+
+cat >>confdefs.h <<\_ACEOF
 #define STDC_HEADERS 1
-EOF
+_ACEOF
 
 fi
 
-for ac_hdr in string.h
+
+for ac_header in string.h
 do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2058: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2063 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+fi
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
+$as_echo_n "checking $ac_header usability... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_header_compiler=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
+$as_echo_n "checking $ac_header presence... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  ac_header_preproc=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+fi
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
 fi
+
 done
 
 
@@ -2095,17 +20641,17 @@
 #   Check for tcl.h
 #--------------------------------------------------------------------
 
-# Check whether --with-tcl-includes or --without-tcl-includes was given.
+
+# Check whether --with-tcl-includes was given.
 if test "${with_tcl_includes+set}" = set; then
-  withval="$with_tcl_includes"
-  tcl_includes=$withval
+  withval=$with_tcl_includes; tcl_includes=$withval
 else
   tcl_includes=$prefix/include
 fi
 
 
-echo $ac_n "checking where to look for tcl.h""... $ac_c" 1>&6
-echo "configure:2109: checking where to look for tcl.h" >&5
+{ $as_echo "$as_me:$LINENO: checking where to look for tcl.h" >&5
+$as_echo_n "checking where to look for tcl.h... " >&6; }
 TCL_INCLUDE_DIR=""
 for dir in $tcl_includes $prefix/include/ /usr/include; do
     if test -r $dir/tcl.h; then
@@ -2115,11 +20661,16 @@
 done
 
 if test -z "$TCL_INCLUDE_DIR"; then
-    { echo "configure: error: 
+    { { $as_echo "$as_me:$LINENO: error:
+  Can't find tcl.h.  Use --with-tcl-includes to specify the directory
+  containing tcl.h on your system." >&5
+$as_echo "$as_me: error:
   Can't find tcl.h.  Use --with-tcl-includes to specify the directory
-  containing tcl.h on your system." 1>&2; exit 1; }
+  containing tcl.h on your system." >&2;}
+   { (exit 1); exit 1; }; }
 else
-    echo "$ac_t""$TCL_INCLUDE_DIR/tcl.h" 1>&6
+    { $as_echo "$as_me:$LINENO: result: $TCL_INCLUDE_DIR/tcl.h" >&5
+$as_echo "$TCL_INCLUDE_DIR/tcl.h" >&6; }
 fi
 
 
@@ -2127,59 +20678,93 @@
 # check for the terminal library.
 # ---
 
-# Check whether --with-tlib-library or --without-tlib-library was given.
+
+# Check whether --with-tlib-library was given.
 if test "${with_tlib_library+set}" = set; then
-  withval="$with_tlib_library"
-  LIBS="$LIBS $withval"
+  withval=$with_tlib_library; LIBS="$LIBS $withval"
 else
   for tlib in ncurses termlib termcap curses; do
 	brk=yes
-	echo $ac_n "checking for tputs in -l$tlib""... $ac_c" 1>&6
-echo "configure:2139: checking for tputs in -l$tlib" >&5
-ac_lib_var=`echo $tlib'_'tputs | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+
+as_ac_Lib=`$as_echo "ac_cv_lib_$tlib''_tputs" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for tputs in -l$tlib" >&5
+$as_echo_n "checking for tputs in -l$tlib... " >&6; }
+if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
 else
-  ac_save_LIBS="$LIBS"
+  ac_check_lib_save_LIBS=$LIBS
 LIBS="-l$tlib  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2147 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char tputs();
-
-int main() {
-tputs()
-; return 0; }
-EOF
-if { (eval echo configure:2158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo $tlib | sed -e 's/^a-zA-Z0-9_/_/g' \
-    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tputs ();
+int
+main ()
+{
+return tputs ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  eval "$as_ac_Lib=yes"
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	eval "$as_ac_Lib=no"
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+ac_res=`eval 'as_val=${'$as_ac_Lib'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Lib'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_LIB$tlib" | $as_tr_cpp` 1
+_ACEOF
 
   LIBS="-l$tlib $LIBS"
 
 else
-  echo "$ac_t""no" 1>&6
-brk=no
+  brk=no
 fi
 
 	if test $brk = "yes"; then
@@ -2188,9 +20773,13 @@
 	fi
     done
     if test "x" = "x$HAVE_TLIB"; then
-	{ echo "configure: error: 
+	{ { $as_echo "$as_me:$LINENO: error:
 	    no terminal library found. Please retry with the --with-tlib argument.
-	" 1>&2; exit 1; }
+	" >&5
+$as_echo "$as_me: error:
+	    no terminal library found. Please retry with the --with-tlib argument.
+	" >&2;}
+   { (exit 1); exit 1; }; }
     fi
 
 fi
@@ -2201,17 +20790,17 @@
 #   Check for readline.h
 #--------------------------------------------------------------------
 
-# Check whether --with-readline-includes or --without-readline-includes was given.
+
+# Check whether --with-readline-includes was given.
 if test "${with_readline_includes+set}" = set; then
-  withval="$with_readline_includes"
-  rl_includes=$withval
+  withval=$with_readline_includes; rl_includes=$withval
 else
   rl_includes=""
 fi
 
 
-echo $ac_n "checking where to look for readline.h""... $ac_c" 1>&6
-echo "configure:2215: checking where to look for readline.h" >&5
+{ $as_echo "$as_me:$LINENO: checking where to look for readline.h" >&5
+$as_echo_n "checking where to look for readline.h... " >&6; }
 READLINE_INCLUDE_DIR=""
 for dir in $rl_includes /usr/local/include/readline /usr/local/include /usr/include/readline /usr/include ; do
     if test -r $dir/readline.h; then
@@ -2221,77 +20810,117 @@
 done
 
 if test -z "$READLINE_INCLUDE_DIR"; then
-    { echo "configure: error: 
+    { { $as_echo "$as_me:$LINENO: error:
   Can't find readline.h.
   Use --with-readline-includes to specify the directory
-  containing readline.h on your system." 1>&2; exit 1; }
+  containing readline.h on your system." >&5
+$as_echo "$as_me: error:
+  Can't find readline.h.
+  Use --with-readline-includes to specify the directory
+  containing readline.h on your system." >&2;}
+   { (exit 1); exit 1; }; }
 else
-    echo "$ac_t""$READLINE_INCLUDE_DIR/readline.h" 1>&6
+    { $as_echo "$as_me:$LINENO: result: $READLINE_INCLUDE_DIR/readline.h" >&5
+$as_echo "$READLINE_INCLUDE_DIR/readline.h" >&6; }
 	base="`(basename ${READLINE_INCLUDE_DIR}) 2>/dev/null`"
 	if test "x${base}" != "xreadline"; then
-		cat >> confdefs.h <<EOF
+
+cat >>confdefs.h <<_ACEOF
 #define READLINE_LIBRARY 1
-EOF
+_ACEOF
 
 	fi
 fi
 
-# Check whether --with-readline-library or --without-readline-library was given.
+
+# Check whether --with-readline-library was given.
 if test "${with_readline_library+set}" = set; then
-  withval="$with_readline_library"
-  LIBS="$LIBS $withval"
-else
-  echo $ac_n "checking for rl_callback_read_char in -lreadline""... $ac_c" 1>&6
-echo "configure:2246: checking for rl_callback_read_char in -lreadline" >&5
-ac_lib_var=`echo readline'_'rl_callback_read_char | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lreadline  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2254 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char rl_callback_read_char();
-
-int main() {
-rl_callback_read_char()
-; return 0; }
-EOF
-if { (eval echo configure:2265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+  withval=$with_readline_library; LIBS="$LIBS $withval"
+else
 
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo readline | sed -e 's/^a-zA-Z0-9_/_/g' \
-    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
+{ $as_echo "$as_me:$LINENO: checking for rl_callback_read_char in -lreadline" >&5
+$as_echo_n "checking for rl_callback_read_char in -lreadline... " >&6; }
+if test "${ac_cv_lib_readline_rl_callback_read_char+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lreadline  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char rl_callback_read_char ();
+int
+main ()
+{
+return rl_callback_read_char ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_readline_rl_callback_read_char=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_readline_rl_callback_read_char=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_readline_rl_callback_read_char" >&5
+$as_echo "$ac_cv_lib_readline_rl_callback_read_char" >&6; }
+if test "x$ac_cv_lib_readline_rl_callback_read_char" = x""yes; then
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBREADLINE 1
+_ACEOF
 
   LIBS="-lreadline $LIBS"
 
 else
-  echo "$ac_t""no" 1>&6
-echo "$ac_t""
+  { $as_echo "$as_me:$LINENO: result:
 	    Your readline version does not support readline's alternate interface.
 	    Please upgrade to readline >= 2.2 and retry.
-	" 1>&6
+	" >&5
+$as_echo "
+	    Your readline version does not support readline's alternate interface.
+	    Please upgrade to readline >= 2.2 and retry.
+	" >&6; }
 	exit
-    
+
 fi
 
 
@@ -2303,74 +20932,142 @@
 # check for readline's (macro.c) private variable
 # _rl_executing_macro.
 
-echo $ac_n "checking for _rl_executing_macro in -lreadline""... $ac_c" 1>&6
-echo "configure:2308: checking for _rl_executing_macro in -lreadline" >&5
-cat > conftest.$ac_ext <<EOF
-#line 2310 "configure"
-#include "confdefs.h"
-
-int main() {
+{ $as_echo "$as_me:$LINENO: checking for _rl_executing_macro in -lreadline" >&5
+$as_echo_n "checking for _rl_executing_macro in -lreadline... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
 
     extern char* _rl_executing_macro;
     _rl_executing_macro = (char*) 0;
 
-; return 0; }
-EOF
-if { (eval echo configure:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6;
-    cat >> confdefs.h <<\EOF
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; };
+
+cat >>confdefs.h <<\_ACEOF
 #define EXECUTING_MACRO_HACK 1
-EOF
+_ACEOF
 
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	{ $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
-rm -f conftest*
 
-# check for readline's rl_cleanup_after_signal
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
 
-echo $ac_n "checking for rl_cleanup_after_signal() in -lreadline""... $ac_c" 1>&6
-echo "configure:2338: checking for rl_cleanup_after_signal() in -lreadline" >&5
-cat > conftest.$ac_ext <<EOF
-#line 2340 "configure"
-#include "confdefs.h"
+# check for readline's rl_cleanup_after_signal
 
-int main() {
+{ $as_echo "$as_me:$LINENO: checking for rl_cleanup_after_signal() in -lreadline" >&5
+$as_echo_n "checking for rl_cleanup_after_signal() in -lreadline... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
 
     extern void rl_cleanup_after_signal();
     rl_cleanup_after_signal();
 
-; return 0; }
-EOF
-if { (eval echo configure:2350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6;
-    cat >> confdefs.h <<\EOF
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; };
+
+cat >>confdefs.h <<\_ACEOF
 #define CLEANUP_AFER_SIGNAL 1
-EOF
+_ACEOF
 
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	{ $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
-rm -f conftest*
 
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
 
-echo $ac_n "checking for the readline version number""... $ac_c" 1>&6
-echo "configure:2367: checking for the readline version number" >&5
+
+{ $as_echo "$as_me:$LINENO: checking for the readline version number" >&5
+$as_echo_n "checking for the readline version number... " >&6; }
 if test "$cross_compiling" = yes; then
-  echo "$ac_t""no cross compiling" 1>&6
+  { $as_echo "$as_me:$LINENO: result: no cross compiling" >&5
+$as_echo "no cross compiling" >&6; }
 
 else
-  cat > conftest.$ac_ext <<EOF
-#line 2373 "configure"
-#include "confdefs.h"
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 #include <stdio.h>
 int main () {
@@ -2380,40 +21077,65 @@
     close(fp);
     return 0;
 }
-EOF
-if { (eval echo configure:2385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   READLINE_VERSION=`cat conftestversion`
-    echo "$ac_t""$READLINE_VERSION" 1>&6
+    { $as_echo "$as_me:$LINENO: result: $READLINE_VERSION" >&5
+$as_echo "$READLINE_VERSION" >&6; }
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  echo "$ac_t""failed" 1>&6
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ $as_echo "$as_me:$LINENO: result: failed" >&5
+$as_echo "failed" >&6; }
 fi
-rm -fr conftest*
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 
 
-# Check whether --enable-tclshrl or --disable-tclshrl was given.
+
+# Check whether --enable-tclshrl was given.
 if test "${enable_tclshrl+set}" = set; then
-  enableval="$enable_tclshrl"
-  	case "${enableval}" in
+  enableval=$enable_tclshrl; 	case "${enableval}" in
 	    yes) enable_static=true ;;
 	    no)  enable_static=false ;;
-	    *)   { echo "configure: error: bad value ${enableval} for --enable-static" 1>&2; exit 1; } ;;
+	    *)   { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-static" >&5
+$as_echo "$as_me: error: bad value ${enableval} for --enable-static" >&2;}
+   { (exit 1); exit 1; }; } ;;
 	esac
-    
+
 else
   	enable_static=false
-    
-
-fi
 
 
+fi
 
-if test x$enable_static = xtrue; then
+ if test x$enable_static = xtrue; then
   STATIC_TCLSHRL_TRUE=
   STATIC_TCLSHRL_FALSE='#'
 else
@@ -2421,28 +21143,28 @@
   STATIC_TCLSHRL_FALSE=
 fi
 
-# Check whether --enable-wishrl or --disable-wishrl was given.
+
+# Check whether --enable-wishrl was given.
 if test "${enable_wishrl+set}" = set; then
-  enableval="$enable_wishrl"
-  	case "${enableval}" in
+  enableval=$enable_wishrl; 	case "${enableval}" in
 	    yes)
 		enable_static=true
 				. $TCL_LIB_DIR/tkConfig.sh
-		
+
 	    ;;
 	    no)  enable_static=false ;;
-	    *)   { echo "configure: error: bad value ${enableval} for --enable-static" 1>&2; exit 1; } ;;
+	    *)   { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-static" >&5
+$as_echo "$as_me: error: bad value ${enableval} for --enable-static" >&2;}
+   { (exit 1); exit 1; }; } ;;
 	esac
-    
+
 else
   	enable_static=false
-    
-
-fi
 
 
+fi
 
-if test x$enable_static = xtrue; then
+ if test x$enable_static = xtrue; then
   STATIC_WISHRL_TRUE=
   STATIC_WISHRL_FALSE='#'
 else
@@ -2454,399 +21176,1473 @@
 
 
 
-trap '' 1 2 15
-cat > confcache <<\EOF
+
+ac_config_files="$ac_config_files Makefile tclreadline.h tclreadlineInit.tcl tclreadlineSetup.tcl tclreadline.n pkgIndex.tcl"
+
+cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
 #
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
 #
-EOF
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
 
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
 test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
+DEFS=-DHAVE_CONFIG_H
 
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
 
-DEFS=-DHAVE_CONFIG_H
+LTLIBOBJS=$ac_ltlibobjs
 
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
 
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${STATIC_TCLSHRL_TRUE}" && test -z "${STATIC_TCLSHRL_FALSE}"; then
+  { { $as_echo "$as_me:$LINENO: error: conditional \"STATIC_TCLSHRL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"STATIC_TCLSHRL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${STATIC_WISHRL_TRUE}" && test -z "${STATIC_WISHRL_FALSE}"; then
+  { { $as_echo "$as_me:$LINENO: error: conditional \"STATIC_WISHRL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"STATIC_WISHRL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#! $SHELL
+# Generated by $as_me.
 # Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
 # Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
+# configure, is in config.log if it exists.
 
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
 do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
 done
+IFS=$as_save_IFS
 
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
 
-trap 'rm -fr `echo "Makefile tclreadline.h tclreadlineInit.tcl tclreadlineSetup.tcl tclreadline.n pkgIndex.tcl config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
 
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAJOR@%$MAJOR%g
-s%@MINOR@%$MINOR%g
-s%@PATCHLEVEL@%$PATCHLEVEL%g
-s%@VERSION@%$VERSION%g
-s%@PATCHLEVEL_STR@%$PATCHLEVEL_STR%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@CC@%$CC%g
-s%@EXEEXT@%$EXEEXT%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@RANLIB@%$RANLIB%g
-s%@LN_S@%$LN_S%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@LIBTOOL_DEPS@%$LIBTOOL_DEPS%g
-s%@TCLRL_LIBDIR@%$TCLRL_LIBDIR%g
-s%@TCLRL_DIR@%$TCLRL_DIR%g
-s%@CPP@%$CPP%g
-s%@STATIC_TCLSHRL_TRUE@%$STATIC_TCLSHRL_TRUE%g
-s%@STATIC_TCLSHRL_FALSE@%$STATIC_TCLSHRL_FALSE%g
-s%@TK_LIB_SPEC@%$TK_LIB_SPEC%g
-s%@STATIC_WISHRL_TRUE@%$STATIC_WISHRL_TRUE%g
-s%@STATIC_WISHRL_FALSE@%$STATIC_WISHRL_FALSE%g
-s%@TCL_INCLUDE_DIR@%$TCL_INCLUDE_DIR%g
-s%@TCL_LIB_SPEC@%$TCL_LIB_SPEC%g
-s%@READLINE_INCLUDE_DIR@%$READLINE_INCLUDE_DIR%g
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
 
-CEOF
-EOF
 
-cat >> $CONFIG_STATUS <<\EOF
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
+else
+  as_ln_s='cp -p'
 fi
-EOF
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
-cat >> $CONFIG_STATUS <<EOF
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
 
-CONFIG_FILES=\${CONFIG_FILES-"Makefile tclreadline.h tclreadlineInit.tcl tclreadlineSetup.tcl tclreadline.n pkgIndex.tcl"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTION]... [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    { $as_echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
 fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "tclreadline.h") CONFIG_FILES="$CONFIG_FILES tclreadline.h" ;;
+    "tclreadlineInit.tcl") CONFIG_FILES="$CONFIG_FILES tclreadlineInit.tcl" ;;
+    "tclreadlineSetup.tcl") CONFIG_FILES="$CONFIG_FILES tclreadlineSetup.tcl" ;;
+    "tclreadline.n") CONFIG_FILES="$CONFIG_FILES tclreadline.n" ;;
+    "pkgIndex.tcl") CONFIG_FILES="$CONFIG_FILES pkgIndex.tcl" ;;
+
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
   esac
+done
+
 
-  echo creating $ac_file
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
 
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} ||
+{
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
 
-EOF
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
 
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
+    break
+  elif $ac_last_try; then
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
 
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
+$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
+   { (exit 1); exit 1; }; }
+fi # test -n "$CONFIG_HEADERS"
 
-rm -f conftest.tail
-while :
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
 do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$tmp/config.h" "$ac_file" \
+	|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
     fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
+$as_echo "$as_me: error: could not create -" >&2;}
+   { (exit 1); exit 1; }; }
   fi
-fi; done
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
 
-EOF
-cat >> $CONFIG_STATUS <<EOF
+  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
 
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+    dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { as_dir=$dirpart/$fdir
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
 
-exit 0
-EOF
+  esac
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
 chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
